Skip to main content
Erschienen in: Journal of Orthopaedic Surgery and Research 1/2019

Open Access 01.12.2019 | Research article

3D printing-based Ganz approach for treatment of femoral head fractures: a prospective analysis

verfasst von: Jinwu Wang, Leyi Cai, Linzhen Xie, Hua Chen, Xiaoshan Guo, Kehe Yu

Erschienen in: Journal of Orthopaedic Surgery and Research | Ausgabe 1/2019

Abstract

Background

Femoral head fractures are uncommon injuries. Open reduction and internal fixation (ORIF) of femoral head fracture is the preferred treatment for most patients. There are several surgical approaches and treatments for this difficult fracture. However, the optimal surgical approach for the treatment of femoral head fracture remains controversial. Meanwhile, the operation is difficult and the complications are numerous. We prospectively reviewed patients with femoral head fractures managed surgically through the 3D printing-based Ganz approach to define a better approach with the least morbidity.

Patients and methods

Between 2012 and 2017, a total of 17 patients were included in this study. An exact 1:1 3D printing model of the injured hip side was fabricated for each patient and simulated surgery was finished preoperative. The surgical approach was performed as described by Ganz. Functional assessment was performed using the modified Merle d’Aubigne scores. The reduction of the fracture was evaluated according to Matta’s criteria. The incidence of complications, such as heterotopic ossification (HO) and avascular necrosis (AVN), and the need for additional surgery were also documented.

Results

Twelve of 17 patients (four females and eight males) were available for 2 years follow-up. The mean follow-up was 35 months (25–48 months). Average age for the 12 patients was 39.9 ± 12.2 years. According to the Pipkin classification, four patients were type I fracture, three patients were type II fracture, and five patients were type IV fracture. The mean operative time was 124.2 ± 22.1 min, and the estimated blood loss was 437.5 ± 113.1 ml. According to Merle d’ Aubigne scores, excellent results were achieved in six of the 12 patients; four good and two poor results occurred in the rest of the patients. On the radiograph evaluation, fracture reduction was defined as anatomical in eight patients, and imperfect in four. Most patients had good outcomes and satisfactory hip function at last follow-up. Almost all great trochanteric osteectomy healed uneventfully. One patient developed symptomatic AVN of the femoral head and underwent THA at 3 years. After THA, she regained a good hip function with the ability to return to work and almost no reduction in sports activities. Heterotopic ossification was found in four cases (type I-1, type II-2, and type III-1).

Conclusions

The 3D printing-based Ganz approach provides a safe and reliable approach and satisfactory results of treatment in femoral head fractures. Using 3D printed model for the fracture of the femoral head, the fracture can be viewed in every direction to provide an accurate description of fracture characteristics, which contributes to make a reasonable surgical plan for patients. In addition, the 3D printing-based Ganz approach can obtain excellent surgical exposure and protection of the femoral head blood supply, reduce the operation time and intraoperative blood loss, make the precise osteotomy, anatomically fix the intra-articular fragments, and effectively reduce postoperative complications.

Trial registration

We register our research at http://​www.​researchregistry​.​com. The Unique Identifying Number (UIN) from the Research Registry of the study is researchregistry​4847.
Hinweise

Publisher’s Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Abkürzungen
ATLS™
Adult Trauma Life Support
AVN
Avascular necrosis
CT
Computed tomography
HO
Heterotopic ossification
MFCA
Medial femoral circumflex artery
ORIF
Open reduction and internal fixation
THA
Total hip arthroplasty
PACS
Picture archiving and communication systems
K-L approach
Kocher–Langenbeck approach

Introduction

Fracture of the femoral head was described by Birkett [1] in 1869 firstly, who found this fracture during dissection of a cadaver. Due to the intrinsic anatomical stability of the hip, most of these injuries were caused by high-energy trauma, typically including falls from a significant height or car accidents (such as pedestrians being run over and collisions) [2]. Park et al. [3] found traffic accidents accounted for 93.9% of femoral head fractures, Kelly and Yarbrough [4] suggested an incidence of 92.6% and Pipkin [5] reported traffic accidents as the cause of femoral head fractures in about 92% of all such fractures. Approximately two thirds of patients were young adults, occurring in as many as 75% of the cases [6]. About 5~15% of posterior hip dislocations have been reported to be associated with femoral head fractures [7]. The most widely used classification was that of Pipkin [5] which was based on the location of the femoral head fracture in relation to the fovea and additional lesion on the femoral neck or acetabulum as shown in Fig. 1. The absence of randomized controlled data and a validated outcome instrument have contributed to the lake of absolute recommendations and indications for the most appropriate treatment of these injuries. There is still no consensus on the management of injuries: whether to treat these fractures operatively or non-operatively, whether to fix or excise the head fragment, or which surgical approach to use.
The fracture itself as well as posttraumatic changes such as heterotopic ossification (HO), avascular necrosis (AVN) of the femoral head, and secondary osteoarthritis might lead to a restriction in hip function and permanent disability even in young patients [8]. The principles of treatment included prompt reduction of the associated hip dislocation, early anatomic reduction, rigid fixation of large fragments, restoration of hip congruency, and stability and removal of small and comminuted intra-articular fragments [9].
The matter of which operative approach should be used for the surgical treatment of femoral head fractures remains controversial [10]. The anterior, posterior, and lateral approaches have been reported, with advantages and disadvantages. Previous studies [11, 12] strongly objected to choose an anterior approach and advocated the use of posterior Kocher–Langenbeck approach, deeming that the former would damage any residual blood supply of the femoral head. However, some anatomical researches [1315] revealed that the medial femoral circumflex artery was the main source of femoral head vascular supply and specifically its deep branch, while the lateral femoral circumflex artery contributed a little to it. Subsequently, studies [1619] carried out the anterior Smith-Petersen approach with relatively satisfactory results, emphasizing that it offered easier access to and fixation of the fractured head. Recently, a posterior-based approach with a trochanteric flip osteotomy and a surgical hip dislocation have been advocated for the management of the femoral head fractures which is first reported by Ganz et al. in 2001 with 213 hips [20]. This approach preserves the deep branch of the medial femoral circumflex artery (MFCA) and at the same time allows unimpaired complete visibility of the femoral head, permitting reduction and fixation of the fragments under direct visual control as shown in Fig. 2.
In recent years, along with the development of digital medicine in clinical treatment, 3D printing technology has achieved a quantum leap from virtual simulation to the real-world clinical application, which overcomes the two-dimensional limitation of CT and MRI data and presents a real anatomical structure [21, 22]. Moreover, this technology has been widely used in various fields, including dentistry, anatomical models, medical devices, tissue engineering and regenerative medicine, engineered tissue models, and drug formulation [23]. Currently, various kinds of biological materials have been developed continuously, which were expected to be used for 3D printing [2426]. And a variety of 3D printing models and their fabrication processes have been applied, which were prepared in a form of powders, granules, dense or porous scaffolds, and bioactive coatings on metal prosthesis [2729]. Our previous research has proven the advantages of 3D printing technology in orthopedic surgeries [3032], such as shortening the operation time and reducing the intraoperative blood loss. Tack et al. [33] also found that 3D-printing technology reduced operation time in 46% of the studies, 72% mentioned improved medical outcomes, and 76% of the studies mentioned that the printed part had good accuracy. What is more, it also can assist in accurate preoperative planning, as well as surgical strategy simulation, and enhance communication with patients.
We have been using the Ganz approach assisted by 3D printing technology to operate incongruent hips with displaced femoral head fractures at our institution from 2012. In this prospective trial, we report our results with the approach in 12 Pipkin fractures with a minimum follow-up of 2 years.

Patients and methods

We performed a prospective analysis of all patients with a femoral head fracture who were treated operatively with open reduction and screw fixation by use of the 3D printing-based Ganz approach at our institution between 2012 and 2017. The work had been reported in line with the STROCSS criteria [34]. There were a total of 21 femoral head fractures during the study period. We surgically treated 17 patients who were younger than 60 years old under this approach, because three patients were older than 60 years old and had been treated with total hip arthroplasty (THA). Conservative treatment was only justifiable for one patient because the post-reduction CT demonstrated an anatomic reduction of the head fragments [35]. Each fracture was classified according to the Pipkin classification.
All patients presented to our emergency department, and after initial evaluation according to the Adult Trauma Life Support (ATLS™) guidelines [36], immediate closed reduction (< 6 h for each patient) of the hip fracture dislocation was attempted under general anesthesia. There was a patient with irreducible dislocation with the femoral head buttonholed through the capsule and impaled against the posterior rim of the acetabulum. This patient indicated open reduction and internal fixation with emergency surgery; thus, the patient was excluded due to the lack of time for 3D printing preoperative. All the rest patients received a CT scan to evaluate the quality of reduction. Operative treatment was indicated for fractures displaced 2 mm or more in CT scan. Two patients were lost to follow-up, and two patients were excluded because of follow-up of less than 2 years, leaving a total of 12 patients as the study population. Patient age at surgery, sex, side of injury, operative time, and postoperative complications were recorded in a database. Patients were asked to give their informed consent to the use of an unconventional approach when eligible according to the selection criteria. This study was approved by the Institutional Review Board of our hospital.

Preparation of the 3D model and surgical simulation

We received computed tomography (CT) scans of the die-punch fractures from the Star PACS system (INFINITT, Seoul, South Korea) of our institution. The original CT data were stored in DICOM format and 3-dimensional (3D) reconstructed using Mimics software v20.0 (Materialise, Leuven, Belgium), positioning by adjusting the threshold to reveal the intact structures of femur and the bones around the hip joint. The 3D model of the injured hip was produced using Unite Boolean calculation and further processing for the noise reduction and smoothing of the hip joint. The design data was then imported into the 3D printing software (Cura Software v15.02) in STL format. After a 3D digital model was formed, we saved it in Coed format and exported it to a 3D printer (3D ORTHO Waston Med, Inc., Changzhou, Jiangsu, China). Finally, the exact 1:1 model of the injured hip side was fabricated. The main components of the 3D printing model (Anhui Yinke Technology Co., Ltd.) were 30~70% epoxy resins, 15~50% acrylates, and 2~10% photoinitiator. And its mechanical properties were as follows: Hardness was 76~88 shore D, flexural strength was 69~74 Mpa, heat deflection temperature was 39~52 °C, and the density was 1.12~1.18 g/cm3.
The structural characteristics of the fracture were clear from the 3D printed model. Firstly, a classic trochanteric osteotomy was accomplished; the thickness of the osteotomized fragment was 1.5 cm [37]. Then, we mimicked the intraoperative reduction and fixation maneuver accurately on the models. Moreover, suitable plates and screws were chosen in the real-size hip model. The ideal length, location, and orientation were placed on the model. Then, the X-ray of the model would be taken for checking the proper position of the plate and the screws, which would be sterilized and stored for later use in surgery. In addition, the 3D printed model could be used intraoperatively as a reference for anatomical reduction of the fracture.

Surgical technique

The operation was started under general anesthesia or spinal anesthesia. Surgery was performed with the patients in the lateral decubitus position on the contralateral side using a standard operation table. Sterilization and drape of the incision centered on the femoral trochanter. In addition, a sterile bag was fixed on the ventral side of the patient for positioning the leg during hip dislocation. The surgical approach was performed as described by Ganz et al. [20]. An incision was made from the posterosuperior edge of the greater trochanter extending distally to the posterior border of the ridge of vastus lateralis. The trochanteric flip osteotomy (V-shaped myofascial flap) was carefully performed staying laterally to the insertion of the short external rotators. The thickness of the osteotomised fragment should not exceed 1.5 cm to protect the MFCA which had been simulated on a 3D printed model.
The trochanteric flip was slided anteriorly after releasing the origin of the gluteus minimus. A Z-shaped anterosuperior capsulotomy was performed when the capsule was intact, or completed if there was a partial capsular rupture. This interval was safe regarding the risk of damage to the deep branch of the medial circumflex artery [13]. Then, the femoral head could be dislocated after the leg was brought into further flexion and external rotation. The leg was then placed into the sterile bag placed on the opposite side of the operating table. The femoral head and the acetabulum were inspected with a full 360° view by manipulating the leg because of the gap of up to 11 cm between them. The next step was debridement and removal of small osteochondral fragments and free cartilage flaps. In cases where larger head fragments did still have soft tissue attachment, this was mostly via the inferior retinaculum. Those attachments should be preserved in any circumstances because this connection could provide valuable blood supply to the fragment. For estimation of blood supply to the femoral head, we speculated that bleeding of the surfaces of the cancellous bone after trimming osteophytes on the periphery of the head were further signs of satisfactory vascularity.
For Pipkin I and II, fixation was done with 3.2-mm Herbert screws (Right, USA) or partially threaded screws under direct vision with specific attention to avoidance of weight-bearing zones and screw protrusion. The type, length, and position of the screws had been measured and determined on the 3D printing model. Associated labral tears if present were repaired with 3-mm suture anchors (Smith & Nephew, USA). For treating a Pipkin III fracture (femoral neck and femoral head fracture combined), the neck fracture should be treated first. The reposition of the femoral neck component could be performed through the same approach. In cases of Type IV fractures, we relocated the femoral head, debrided muscle tissue, and exposed the posterior wall and column. After the acetabular fractures were finished, the femoral head fractures would be handled over as above. The repaired femoral head was then gently reduced after careful retraction of the cut edges of the capsule. When performed movement in all directions of the hip is without impact and without signs of dislocation, a stable hip was obtained. Then, the capsular tear was repaired, piriformis tendon was reattached, and all muscle tears were repaired. In addition, the trochanteric osteotomy was reduced and fixation was achieved with three lag screws. The typical cases were shown in Figs. 3, 4, and 5.

Postoperative management

The postoperative management was the same for all patients. The antibiotics were used within 3 days postoperatively. Oral indomethacin was used to prevent heterotopic ossification. Thromboembolic prophylaxis with low-molecular weight heparin was administered for 2 weeks. Patients were allowed toe touch weight-bearing for 8 weeks followed by full weight-bearing. Immediate hip range of motion exercises was initiated. Patients were recommended to perform low-impact training such as swimming or cycling when actively exercising for strengthening of the abductor muscles.

Clinical evaluation

Functional assessment was performed using the modified Merle d’Aubigne scores [38] at last follow-up. The Merle d’Aubigne score evaluated hip function in three categories: pain, mobility and walking, each with 0–6 points. Eighteen points represented an excellent result, 15–17 points were good, 12–14 fair, and less than 12 points was regarded as a poor outcome.

Radiological evaluation

Radiographs were taken immediately postoperative and at 8 and 12 weeks as well as 6, 12, and 24 months after surgery. The reduction of the fracture was evaluated according to Matta’s criteria [39] by measuring the residual postoperative displacements on the two plain radiographs (AP and lateral views). The highest of the three values was used to grade the reduction according to the categories: anatomical (0–1 mm of displacement), imperfect (2–3 mm), or poor (more than 3 mm).

Complications evaluation

The incidence of complications, such as heterotopic ossification (HO) and avascular necrosis (AVN), and the need for additional surgery were also documented. The scale of Brooker et al. [40] was used to classify heterotopic ossification when present. Heterotopic ossification was classified as a complication if it interfered with joint motion.

Results

Twelve of 17 patients (four females and eight males) were available for 2 years follow-up. As shown in Table 1, the mean follow-up was 35 months (25–48 months). Average age for the 12 patients was 39.9 ± 12.2 years. According to the Pipkin classification, the group had four patients with type I fracture, three patients with type II fracture, and five patients with type IV fracture. Eight patients sustained their injury during car accidents, two patients by falling from a high place, and the other two patients during sports. All patients underwent preoperative CT scans, 3D printed models, and simulated surgery. The 3D printed models were used as a reference for anatomical reduction of the fracture during operations. The mean operative time was 124.2 ± 22.1 min and the estimated blood loss was 437.5 ± 113.1 ml.
Table 1
General data
Case
Age
Gender
Pipkin type
Injury mechanism
Surgery time (min)
Intraoperative blood loss (ml)
1
26
Male
IV
Car accident
140
550
2
45
Male
II
Car accident
110
300
3
30
Female
I
Sports accident
100
400
4
48
Male
IV
Car accident
155
600
5
56
Male
II
Falling accident
130
350
6
29
Female
I
Car accident
105
400
7
44
Male
IV
Car accident
140
550
8
24
Female
II
Car accident
100
500
9
39
Male
I
Sports accident
100
350
10
54
Male
IV
Falling accident
155
550
11
28
Male
I
Car accident
110
250
12
56
Female
IV
Car accident
145
450
As shown in Table 2, functional assessment was performed at last follow-up. Most patients had good outcomes and satisfactory hip function. According to Merle d’ Aubigne scores, excellent results were achieved in six of the 12 patients; four good and two poor results occurred in the rest of the patients. On the radiograph evaluation, fracture reduction was defined as anatomical in eight patients, and imperfect in four.
Table 2
Follow-up data
Case
Follow-up (month)
Merle d’Aubigne score
Matta’s score
Complications
1
25
Excellent
Anatomical
Superficial wound infection
2
36
Good
Anatomical
3
48
Poor
Imperfect
Type II HO
4
24
Excellent
Anatomical
5
36
Good
Imperfect
Type II HO
6
30
Excellent
Anatomical
7
35
Good
Anatomical
Trochanteric osteotomy non-union
8
26
Excellent
Anatomical
9
40
Good
Anatomical
Type I HO
10
42
Excellent
Anatomical
11
37
Excellent
Imperfect
12
37
Poor
Imperfect
Type III HO, AVN
One superficial wound infection was found that resolved with repeated dressing and systemic antibiotics. No cases of nerve injury or deep infection were detected in the operation. All trochanteric osteotomies healed uneventfully except in one patient that developed non-union and limping. This 44-year-old man was obese and started early weight-bearing despite medical advice. He was managed by revision of the fixation 10 months after initial surgery.
One patient (56 years old, female) developed symptomatic AVN of the femoral head and underwent THA at 3 years. After THA, she regained a good hip function with the ability to return to work and almost no reduction in sports activities. Besides this patient, no other patient underwent arthroplasty. Heterotopic ossification was found in four cases (type I-1, type II-2, and type III-1); in two cases, it was considered to be causing pain or reduced range of motion and therefore classified as a relevant complication. One patient suffered with AVN as already mentioned above; in the other case, additional surgery for excision of ossification was performed.

Discussion

Fracture of the femoral head associated is an uncommon but severe injury, with posterior hip dislocation sometimes [1]. The fracture itself as well as the subsequent complications such as heterotopic ossifcation, avascular necrosis of the femoral head, and osteoarthritis may lead to a restriction in hip function and permanent disability even in young patients. The general consensus is that operative fixation is warranted. However, controversy exists about the choice of surgical approach for femoral head fractures. Anterolateral (Watson-Jones), anterior (Smith-Petersen), and posterolateral (Kocher–Langenbeck) approaches are the most used in the literature [41]. Advantages and disadvantages of the different approaches have been the subject of previous studies [16, 42]. However, the exposure of fractures and protection of femoral head blood supply have not been well improved.
The posterior approach (K-L approach) was first reported for the treatment of femoral head fractures [43]. However, it is easy to damage the deep branch of the MFCA, leading to necrosis of the femoral head. On the other way, orientation of the fracture with more anterior and medial fracture fragment made direct screw fixation difficult especially in obese patients because of soft tissue obstruction [44]. The Ganz approach provides a safe and reliable approach for hip dislocation without injury to the blood supply of the femoral head. What is more, it offers excellent exposure with access to all areas of the femoral head and acetabulum to allow internal fixation and labral repair. Mostafa et al. [45] compared the Ganz approach versus posterior approach in the treatment of Pipkin type I and II fractures and found that Ganz approach caused less blood loss, shorter operative time, and better visualization and fixation. This makes it an attractive approach for hip resurfacing current years.
The patients treated with an anterior approach (Smith-Petersen) developed more functionally significant heterotopic ossification, although the overall functional outcome was identical [17]. Another at least theoretical disadvantage of anterior access to the hip joint might be a possible deterioration of the remaining blood supply to the femoral head after posterior dislocation and associated damage to the posterior blood vessels. So they strongly advocated posterior approaches for the surgical management of femoral head fractures [12]. However, anatomical and clinical studies do not support this theory. Stannard et al. were able to show that in comparison with an anterior approach the Kocher–Langenbeck approach was associated with an even 3.2 times higher risk of avascular head necrosis [18]. Gautier et al. did the anatomy research of the medial femoral circumflex artery based on dissections of 24 cadaver hips [13]. In the study, with the posterior approach, tenomyotomy of the external rotator muscles is necessary, which interrupts the anastomosis between the inferior gluteal artery and the deep branch of the MFCA. The deep branch itself may also be vulnerable, although there have been no cases of avascular necrosis reported after a resurfacing procedure using this approach. In addition, stable reattachment of the external rotator muscles may also be difficult. What is more, using an anterior approach, the femoral head can be dislocated safely, but inspection of the acetabulum is limited, unless the tensor fascia lata and gluteus medius are extensively detached from their origins. Ganz approach allows for a 360° view of the head and may facilitate a reduction in selected head fractures [46]. At the same time, the impact on MCFA is avoided with this approach.
It is well known that the main goal of surgical treatment for femoral head fractures with Ganz approach is to make the precise osteotomy and anatomically reduce and fix the intra-articular fragments. However, the X-ray and CT images cannot provide a comprehensive understanding for the fracture, no more for the private custom. In recent years, the application of the 3D printing applied in orthopedics was more and more common, such as pelvic fracture [31], pilon fracture, fractures of distal radius [30], and so on. Using 3D printed model, the fracture can be viewed in every direction to provide an accurate description of fracture characteristics. Besides, 3D printing model is able to help orthopedist make an individual, accurate, and reasonable surgical plan for patients, which shows its unique advantages, reducing the operation time, intraoperative blood loss, and the plasticity of plate. In this study, for all operations, the mean operative time was 124.2 ± 22.1 min, the estimated blood loss was 437.5 ± 113.1 ml. Compared with current studies, Ganz et al. [20] reported 13 patients, and the mean surgical time was 121 min for Type I or II fractures and 195 min for Type IV fractures; the mean estimated blood loss was 1334 ml in the isolated femoral head fractures and 1557 ml in head and acetabulum fractures. It was showed that using 3D printed model can reduce the operation time and intraoperative blood loss with Ganz approach for femoral head fractures. However, more RCTs with a larger sample are needed to prove the advantages of 3D printing.
No consensus exists on the safe time interval between injury and reduction of traumatic dislocation of the hip. We performed an emergency closed reduction of all patients with dislocation of the hip for less than 6 h. However, there was one patient (1/12) that developed into AVN, and it may be related to the general condition of the patient and severe lower extremity injuries. Mcmurtry and Quaile [47] showed that the joint should be relocated within 6 h otherwise the risk of avascular necrosis of the femoral head with resultant early degenerative joint disease will increase. Chen et al. [48] reported good results with surgical reduction within 12 h. Epstein et al. [12] noted that reduction within 24 h gave better results than late reduction. In general, this supported the necessity for early reduction of hip dislocation but does not define the critical time after which avascular necrosis occurs. In our opinion, the sooner the hip is restored, the better the survival of the femoral head.
In addition, clinical outcomes are reported with a variety of scoring instruments. Henle et al. [37] reported on 12 patients using the Merle d’Aubigne and Postel score. At 31 months, ten patients had good outcomes and two were considered poor. Similarly, Solberg et al. [49] reported on 12 patients with Pipkin IV fractures and noted good or excellent scores in ten. In the present study, there were six patients with excellent result, four patients with good result and two patients with poor result. It was comparable to current studies with similar good outcomes. Joint replacement was recommended for the treatment of AVN for the patient with poor outcome.
Avascular necrosis of the femoral head is the most significant complication of dislocation of the hip. AVN may be caused by damage to the blood supply at the time of injury or may be iatrogenic. Whereas initial damage to vascular structures is certainly beyond the surgeon’s control, care has to be taken during reduction maneuvers and surgery to avoid further damage to the blood supply. Surgical dislocation as described here produces an anterior dislocation using low-grade controlled trauma. The time of dislocation is much shorter than the 6-h limit which is thought to be critical after traumatic dislocations [50]. All external rotator muscles are left intact and, therefore, protect the MFCA. So, in theory, the probability of AVN in the Ganz approach is much lower than the posterior approach. Mostafa et al. [45] retrospectively reviewed patients with Pipkin type I and II femoral head fractures managed surgically through posterior Kocher–Langenbeck approach and Ganz trochanteric flip approach. Avascular necrosis of the femoral head occurred in one patient (8.1%) of trochanteric flip-approached group and two (18.1%) of posterior approach group. In our study, there was one patient with the result with AVN, and the rate is 8.3% (1/12). Henle et al. [37] made a retrospective analysis of 12 patients with femoral head fractures with posterior dislocation of the hip; there were two patients with poor outcome that developed an AVN. In Ganz et al.’s study [20], one of 13 patients developed symptomatic femoral head AVN. The rate of femoral head AVN was about the same in current studies. All the patients with AVN underwent total hip arthroplasty which was recognized as the best treatment available today.
To our knowledge, there are few prospective studies on the use of Ganz surgical dislocation for femoral head fractures [51, 52]. And this prospective study of 3D printing-based Ganz approach for treatment of femoral head fractures was implemented for the first time. Lack of controls is a limitation of this study. Although Ganz approach provides excellent exposure and satisfactory result for femoral head fractures, we should remember that the most important reasons to choose between these two approaches are the type and location of fracture, concomitant injuries, and preference of the surgeon. In the future, more randomized controlled trial is needed to prove of the superiority of this approach if it should be used as routine for displaced fractures of the femoral head.

Conclusions

The Ganz approach provides a safe and reliable approach for femoral head fractures without injury to the blood supply of the femoral head. What is more, it offers excellent exposure, which allows for a 360° view of the fracture of femoral head, with access to all areas of the femoral head and acetabulum to allow internal fixation and labral repair. Using 3D printed model, the fracture can be viewed in every direction to provide an accurate description of fracture characteristics. And 3D printing model is able to help orthopedist to make an individual, accurate, and reasonable surgical plan for patients. Our study revealed that 3D printing-based Ganz approach could obtain excellent surgical exposure and protection of the femoral head blood supply, reduce the operation time and intraoperative blood loss, make the precise osteotomy, and anatomically reduce and fix the intra-articular fragments, which provided satisfactory results of treatment in femoral head fractures. At the same time, the probability of AVN in this surgical method was much lower than others and the impact on MCFA was avoided with the 3D printing-based Ganz approach.

Acknowledgements

We acknowledge Wenhao Zheng who provided professional writing services for this manuscript.
The study was approved by the Ethical Board Review of our hospital and was performed in accordance with the ethical standards of the Declaration of Helsinki of 1964. All patients agreed to participate in the trial; written informed consent was obtained.
The patient had made consent to publish identifiable information and data.

Competing interests

The authors declare that they have no competing interests.
Open AccessThis article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://​creativecommons.​org/​licenses/​by/​4.​0/​), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The Creative Commons Public Domain Dedication waiver (http://​creativecommons.​org/​publicdomain/​zero/​1.​0/​) applies to the data made available in this article, unless otherwise stated.

Publisher’s Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Literatur
1.
Zurück zum Zitat Birkett J. Description of a dislocation of the head of the femur, complicated with its fracture; with remarks. Medico-Chirurgical Transactions. 1869;52:133–8.CrossRefPubMedPubMedCentral Birkett J. Description of a dislocation of the head of the femur, complicated with its fracture; with remarks. Medico-Chirurgical Transactions. 1869;52:133–8.CrossRefPubMedPubMedCentral
2.
Zurück zum Zitat Birkett J. Description of a dislocation of the head of the femur, complicated with its fracture; with remarks by John Birkett (1815-1904). Clin Orthop Relat Res. 1869;2000(377):4–6. Birkett J. Description of a dislocation of the head of the femur, complicated with its fracture; with remarks by John Birkett (1815-1904). Clin Orthop Relat Res. 1869;2000(377):4–6.
3.
Zurück zum Zitat Park KS, Lee KB, Na BR, et al. Clinical and radiographic outcomes of femoral head fractures: excision vs. fixation of fragment in Pipkin type I: what is the optimal choice for femoral head fracture? J Orthopaedic Sci. 2015;20(4):702–7.CrossRef Park KS, Lee KB, Na BR, et al. Clinical and radiographic outcomes of femoral head fractures: excision vs. fixation of fragment in Pipkin type I: what is the optimal choice for femoral head fracture? J Orthopaedic Sci. 2015;20(4):702–7.CrossRef
4.
Zurück zum Zitat Kelly RP, Yarbrough SH 3rd. Posterior fracture-dislocation of the femoral head with retained medial head fragment. J Trauma. 1971;11(2):97–108.CrossRefPubMed Kelly RP, Yarbrough SH 3rd. Posterior fracture-dislocation of the femoral head with retained medial head fragment. J Trauma. 1971;11(2):97–108.CrossRefPubMed
5.
Zurück zum Zitat Pipkin G. Treatment of grade IV fracture-dislocation of the hip. J Bone Joint Surg Am. 1957;39-A(5):1027–42 passim.CrossRefPubMed Pipkin G. Treatment of grade IV fracture-dislocation of the hip. J Bone Joint Surg Am. 1957;39-A(5):1027–42 passim.CrossRefPubMed
6.
Zurück zum Zitat Alonso JE, Volgas DA, Giordano V, et al. A review of the treatment of hip dislocations associated with acetabular fractures. Clin Orthop Relat Res. 2000;377:32–43.CrossRef Alonso JE, Volgas DA, Giordano V, et al. A review of the treatment of hip dislocations associated with acetabular fractures. Clin Orthop Relat Res. 2000;377:32–43.CrossRef
7.
Zurück zum Zitat Giordano V, Giordano M, Gloria RC, et al. General principles for treatment of femoral head fractures. J Clin Orthop Trauma. 2019;10(1):155–60.CrossRefPubMed Giordano V, Giordano M, Gloria RC, et al. General principles for treatment of femoral head fractures. J Clin Orthop Trauma. 2019;10(1):155–60.CrossRefPubMed
8.
Zurück zum Zitat Kim SM, Oh SM, Cho CH, et al. Fate of subchondral fatigue fractures of femoral head in young adults differs from general outcome of fracture healing. Injury. 2016;47(12):2789–94.CrossRefPubMed Kim SM, Oh SM, Cho CH, et al. Fate of subchondral fatigue fractures of femoral head in young adults differs from general outcome of fracture healing. Injury. 2016;47(12):2789–94.CrossRefPubMed
9.
Zurück zum Zitat Droll KP, Broekhuyse H, O'Brien P. Fracture of the femoral head. J Am Acad Orthop Surg. 2007;15(12):716–27.CrossRefPubMed Droll KP, Broekhuyse H, O'Brien P. Fracture of the femoral head. J Am Acad Orthop Surg. 2007;15(12):716–27.CrossRefPubMed
10.
Zurück zum Zitat Wang CG, Li YM, Zhang HF, et al. Anterior approach versus posterior approach for Pipkin I and II femoral head fractures: a systemic review and meta-analysis. Int J Surg. 2016;27:176–81.CrossRefPubMed Wang CG, Li YM, Zhang HF, et al. Anterior approach versus posterior approach for Pipkin I and II femoral head fractures: a systemic review and meta-analysis. Int J Surg. 2016;27:176–81.CrossRefPubMed
11.
Zurück zum Zitat Epstein HC. Traumatic dislocations of the hip. Clin Orthop Relat Res. 1973;92:116–42.CrossRef Epstein HC. Traumatic dislocations of the hip. Clin Orthop Relat Res. 1973;92:116–42.CrossRef
12.
Zurück zum Zitat Epstein HC, Wiss DA, Cozen L. Posterior fracture dislocation of the hip with fractures of the femoral head. Clin Orthop Relat Res. 1985;201:9–17. Epstein HC, Wiss DA, Cozen L. Posterior fracture dislocation of the hip with fractures of the femoral head. Clin Orthop Relat Res. 1985;201:9–17.
13.
Zurück zum Zitat Gautier E, Ganz K, Krugel N, et al. Anatomy of the medial femoral circumflex artery and its surgical implications. J Bone Joint Surg Br. 2000;82(5):679–83.CrossRefPubMed Gautier E, Ganz K, Krugel N, et al. Anatomy of the medial femoral circumflex artery and its surgical implications. J Bone Joint Surg Br. 2000;82(5):679–83.CrossRefPubMed
14.
Zurück zum Zitat Sevitt S, Thompson RG. The distribution and anastomoses of arteries supplying the head and neck of the femur. J Bone Joint Surg Bri Vol. 1965;47:560–73.CrossRef Sevitt S, Thompson RG. The distribution and anastomoses of arteries supplying the head and neck of the femur. J Bone Joint Surg Bri Vol. 1965;47:560–73.CrossRef
15.
Zurück zum Zitat Trueta J, Harrison MH. The normal vascular anatomy of the femoral head in adult man. J Bone Joint Surg Brit Vol. 1953;35-B(3):442–61.CrossRef Trueta J, Harrison MH. The normal vascular anatomy of the femoral head in adult man. J Bone Joint Surg Brit Vol. 1953;35-B(3):442–61.CrossRef
16.
Zurück zum Zitat Marchetti ME, Steinberg GG, Coumas JM. Intermediate-term experience of Pipkin fracture-dislocations of the hip. J Orthop Trauma. 1996;10(7):455–61.CrossRefPubMed Marchetti ME, Steinberg GG, Coumas JM. Intermediate-term experience of Pipkin fracture-dislocations of the hip. J Orthop Trauma. 1996;10(7):455–61.CrossRefPubMed
17.
Zurück zum Zitat Swiontkowski MF, Thorpe M, Seiler JG, et al. Operative management of displaced femoral head fractures: case-matched comparison of anterior versus posterior approaches for Pipkin I and Pipkin II fractures. J Orthop Trauma. 1992;6(4):437–42.CrossRefPubMed Swiontkowski MF, Thorpe M, Seiler JG, et al. Operative management of displaced femoral head fractures: case-matched comparison of anterior versus posterior approaches for Pipkin I and Pipkin II fractures. J Orthop Trauma. 1992;6(4):437–42.CrossRefPubMed
18.
Zurück zum Zitat Stannard JP, Harris HW, Volgas DA, et al. Functional outcome of patients with femoral head fractures associated with hip dislocations. Clin Orthop Relat Res. 2000;377:44–56.CrossRef Stannard JP, Harris HW, Volgas DA, et al. Functional outcome of patients with femoral head fractures associated with hip dislocations. Clin Orthop Relat Res. 2000;377:44–56.CrossRef
19.
Zurück zum Zitat Kloen P, Siebenrock KA, Raaymakers ELFB, et al. Femoral head fractures revisited. Eur J Trauma. 2002;28(4):221–33.CrossRef Kloen P, Siebenrock KA, Raaymakers ELFB, et al. Femoral head fractures revisited. Eur J Trauma. 2002;28(4):221–33.CrossRef
20.
Zurück zum Zitat Ganz R, Gill TJ, Gautier E, et al. Surgical dislocation of the adult hip a technique with full access to the femoral head and acetabulum without the risk of avascular necrosis. J Bone Joint Surg Bri Vol. 2001;83(8):1119–24.CrossRef Ganz R, Gill TJ, Gautier E, et al. Surgical dislocation of the adult hip a technique with full access to the femoral head and acetabulum without the risk of avascular necrosis. J Bone Joint Surg Bri Vol. 2001;83(8):1119–24.CrossRef
21.
Zurück zum Zitat Choonara YE, du Toit LC, Kumar P, et al. 3D-printing and the effect on medical costs: a new era? Expert Rev Pharmacoecon Outcomes Res. 2016;16(1):23–32.CrossRefPubMed Choonara YE, du Toit LC, Kumar P, et al. 3D-printing and the effect on medical costs: a new era? Expert Rev Pharmacoecon Outcomes Res. 2016;16(1):23–32.CrossRefPubMed
22.
Zurück zum Zitat Yang L, Shang XW, Fan JN, et al. Application of 3D printing in the surgical planning of trimalleolar fracture and doctor-patient communication. Biomed Res Int. 2016;2016:2482086.PubMedPubMedCentral Yang L, Shang XW, Fan JN, et al. Application of 3D printing in the surgical planning of trimalleolar fracture and doctor-patient communication. Biomed Res Int. 2016;2016:2482086.PubMedPubMedCentral
23.
Zurück zum Zitat Liaw CY, Guvendiren M. Current and emerging applications of 3D printing in medicine. Biofabrication. 2017;9(2):024102.CrossRefPubMed Liaw CY, Guvendiren M. Current and emerging applications of 3D printing in medicine. Biofabrication. 2017;9(2):024102.CrossRefPubMed
24.
Zurück zum Zitat Rashid AU, Southern P, Darr JA, et al. Strontium hexaferrite (SrFe12O19) based composites for hyperthermia applications. J Magn Magn Mater. 2013;344:134–9.CrossRef Rashid AU, Southern P, Darr JA, et al. Strontium hexaferrite (SrFe12O19) based composites for hyperthermia applications. J Magn Magn Mater. 2013;344:134–9.CrossRef
25.
Zurück zum Zitat Sahmani S, Saber-Samandari S, Khandan A, et al. Influence of MgO nanoparticles on the mechanical properties of coated hydroxyapatite nanocomposite scaffolds produced via space holder technique: fabrication, characterization and simulation. J Mech Behav Biomed Mater. 2019;95:76–88.CrossRefPubMed Sahmani S, Saber-Samandari S, Khandan A, et al. Influence of MgO nanoparticles on the mechanical properties of coated hydroxyapatite nanocomposite scaffolds produced via space holder technique: fabrication, characterization and simulation. J Mech Behav Biomed Mater. 2019;95:76–88.CrossRefPubMed
26.
Zurück zum Zitat Salami MA, Kaveian F, Rafienia M, et al. Electrospun Polycaprolactone/lignin-based nanocomposite as a novel tissue scaffold for biomedical applications. J Med Signals Sensors. 2017;7(4):228–38.CrossRef Salami MA, Kaveian F, Rafienia M, et al. Electrospun Polycaprolactone/lignin-based nanocomposite as a novel tissue scaffold for biomedical applications. J Med Signals Sensors. 2017;7(4):228–38.CrossRef
27.
Zurück zum Zitat Liu H, Zhou H, Lan H, et al. 3D printing of artificial blood vessel: study on multi-parameter optimization design for vascular molding effect in alginate and gelatin. Micromachines. 2017;8(8). Liu H, Zhou H, Lan H, et al. 3D printing of artificial blood vessel: study on multi-parameter optimization design for vascular molding effect in alginate and gelatin. Micromachines. 2017;8(8).
28.
29.
Zurück zum Zitat Saber-Samandari S, Mohammadi-Aghdam M, Saber-Samandari S. A novel magnetic bifunctional nanocomposite scaffold for photothermal therapy and tissue engineering. Int J Biol Macromol. 2019;138:810–8.CrossRefPubMed Saber-Samandari S, Mohammadi-Aghdam M, Saber-Samandari S. A novel magnetic bifunctional nanocomposite scaffold for photothermal therapy and tissue engineering. Int J Biol Macromol. 2019;138:810–8.CrossRefPubMed
30.
Zurück zum Zitat Chen C, Cai L, Zheng W, et al. The efficacy of using 3D printing models in the treatment of fractures: a randomised clinical trial. BMC Musculoskelet Disord. 2019;20(1):65-73. Chen C, Cai L, Zheng W, et al. The efficacy of using 3D printing models in the treatment of fractures: a randomised clinical trial. BMC Musculoskelet Disord. 2019;20(1):65-73.
31.
Zurück zum Zitat Cai L, Zhang Y, Chen C, et al. 3D printing-based minimally invasive cannulated screw treatment of unstable pelvic fracture. J Orthop Surg Res. 2018;13(1):71.CrossRefPubMedPubMedCentral Cai L, Zhang Y, Chen C, et al. 3D printing-based minimally invasive cannulated screw treatment of unstable pelvic fracture. J Orthop Surg Res. 2018;13(1):71.CrossRefPubMedPubMedCentral
32.
Zurück zum Zitat Cai L, Lou Y, Guo X, et al. Surgical treatment of unstable pelvic fractures with concomitant acetabular fractures. Int Orthop. 2017;41(9):1803–11.CrossRefPubMed Cai L, Lou Y, Guo X, et al. Surgical treatment of unstable pelvic fractures with concomitant acetabular fractures. Int Orthop. 2017;41(9):1803–11.CrossRefPubMed
33.
Zurück zum Zitat Tack P, Victor J, Gemmel P, et al. 3D-printing techniques in a medical setting: a systematic literature review. Biomed Eng Online. 2016;15(1):115.CrossRefPubMedPubMedCentral Tack P, Victor J, Gemmel P, et al. 3D-printing techniques in a medical setting: a systematic literature review. Biomed Eng Online. 2016;15(1):115.CrossRefPubMedPubMedCentral
34.
Zurück zum Zitat Agha RA, Borrelli MR, Vella-Baldacchino M, et al. The STROCSS statement: strengthening the reporting of cohort studies in surgery. Int J Surg. 2017;46:198–202.CrossRefPubMedPubMedCentral Agha RA, Borrelli MR, Vella-Baldacchino M, et al. The STROCSS statement: strengthening the reporting of cohort studies in surgery. Int J Surg. 2017;46:198–202.CrossRefPubMedPubMedCentral
35.
Zurück zum Zitat Dowd GS, Johnson R. Successful conservative treatment of a fracture-dislocation of the femoral head. A case report. J Bone Joint Surg Am. 1979;61(8):1244–6.CrossRefPubMed Dowd GS, Johnson R. Successful conservative treatment of a fracture-dislocation of the femoral head. A case report. J Bone Joint Surg Am. 1979;61(8):1244–6.CrossRefPubMed
36.
Zurück zum Zitat Masters JPM, Achten J, Cook J, et al. Randomised controlled feasibility trial of standard wound management versus negative-pressure wound therapy in the treatment of adult patients having surgical incisions for hip fractures. BMJ Open. 2018;8(4):e020632.PubMedPubMedCentral Masters JPM, Achten J, Cook J, et al. Randomised controlled feasibility trial of standard wound management versus negative-pressure wound therapy in the treatment of adult patients having surgical incisions for hip fractures. BMJ Open. 2018;8(4):e020632.PubMedPubMedCentral
37.
Zurück zum Zitat Henle P, Kloen P, Siebenrock KA. Femoral head injuries: which treatment strategy can be recommended? Injury. 2007;38(4):478–88.CrossRefPubMed Henle P, Kloen P, Siebenrock KA. Femoral head injuries: which treatment strategy can be recommended? Injury. 2007;38(4):478–88.CrossRefPubMed
38.
Zurück zum Zitat Matta JM, Mehne DK, Roffi R. Fractures of the acetabulum. Early results of a prospective study. Clin Orthopaedics Related Res. 1986;205(205):241-50. Matta JM, Mehne DK, Roffi R. Fractures of the acetabulum. Early results of a prospective study. Clin Orthopaedics Related Res. 1986;205(205):241-50.
39.
Zurück zum Zitat Matta JM, Tornetta P, 3rd. Internal fixation of unstable pelvic ring injuries. Clin Orthopaedics Related Res. 1996;329(329):129–40. Matta JM, Tornetta P, 3rd. Internal fixation of unstable pelvic ring injuries. Clin Orthopaedics Related Res. 1996;329(329):129–40.
40.
Zurück zum Zitat Brooker AF, Bowerman JW, Robinson RA, et al. Ectopic ossification following total hip replacement. Incidence and a method of classification. J Bone Joint Surg Am. 1973;55(8):1629–32.CrossRefPubMed Brooker AF, Bowerman JW, Robinson RA, et al. Ectopic ossification following total hip replacement. Incidence and a method of classification. J Bone Joint Surg Am. 1973;55(8):1629–32.CrossRefPubMed
41.
Zurück zum Zitat Khan A, Yates P, Lovering A, et al. The effect of surgical approach on blood flow to the femoral head during resurfacing. J Bone Joint Surg Bri Vol. 2007;89(1):21–5.CrossRef Khan A, Yates P, Lovering A, et al. The effect of surgical approach on blood flow to the femoral head during resurfacing. J Bone Joint Surg Bri Vol. 2007;89(1):21–5.CrossRef
42.
Zurück zum Zitat Hougaard K, Thomsen PB. Traumatic posterior fracture-dislocation of the hip with fracture of the femoral head or neck, or both. J Bone Joint Surg Am. 1988;70(2):233–9.CrossRefPubMed Hougaard K, Thomsen PB. Traumatic posterior fracture-dislocation of the hip with fracture of the femoral head or neck, or both. J Bone Joint Surg Am. 1988;70(2):233–9.CrossRefPubMed
43.
Zurück zum Zitat Butler JE. Pipkin type-II fractures of the femoral head. J Bone Joint Surg Am. 1981;63(8):1292–6.CrossRefPubMed Butler JE. Pipkin type-II fractures of the femoral head. J Bone Joint Surg Am. 1981;63(8):1292–6.CrossRefPubMed
44.
Zurück zum Zitat Roeder LF Jr, DeLee JC. Femoral head fractures associated with posterior hip dislocation. Clin Orthop Relat Res. 1980;147:121–30. Roeder LF Jr, DeLee JC. Femoral head fractures associated with posterior hip dislocation. Clin Orthop Relat Res. 1980;147:121–30.
45.
Zurück zum Zitat Mostafa MF, El-Adl W, El-Sayed MA. Operative treatment of displaced Pipkin type I and II femoral head fractures. Arch Orthop Trauma Surg. 2014;134(5):637–44.CrossRefPubMed Mostafa MF, El-Adl W, El-Sayed MA. Operative treatment of displaced Pipkin type I and II femoral head fractures. Arch Orthop Trauma Surg. 2014;134(5):637–44.CrossRefPubMed
46.
Zurück zum Zitat Masse A, Aprato A, Alluto C, et al. Surgical hip dislocation is a reliable approach for treatment of femoral head fractures. Clin Orthop Relat Res. 2015;473(12):3744–51.CrossRefPubMedPubMedCentral Masse A, Aprato A, Alluto C, et al. Surgical hip dislocation is a reliable approach for treatment of femoral head fractures. Clin Orthop Relat Res. 2015;473(12):3744–51.CrossRefPubMedPubMedCentral
47.
Zurück zum Zitat McMurtry IA, Quaile A. Closed reduction of the traumatically dislocated hip: a new technique. Injury. 2001;32(2):162–4.CrossRefPubMed McMurtry IA, Quaile A. Closed reduction of the traumatically dislocated hip: a new technique. Injury. 2001;32(2):162–4.CrossRefPubMed
48.
Zurück zum Zitat Chen ZW, Zhai WL, Ding ZQ, et al. Operative versus nonoperative management of Pipkin type-II fractures associated with posterior hip dislocation. Orthopedics. 2011;34(5):350.PubMed Chen ZW, Zhai WL, Ding ZQ, et al. Operative versus nonoperative management of Pipkin type-II fractures associated with posterior hip dislocation. Orthopedics. 2011;34(5):350.PubMed
49.
Zurück zum Zitat Solberg BD, Moon CN, Franco DP. Use of a trochanteric flip osteotomy improves outcomes in Pipkin IV fractures. Clin Orthop Relat Res. 2009;467(4):929–33.CrossRefPubMed Solberg BD, Moon CN, Franco DP. Use of a trochanteric flip osteotomy improves outcomes in Pipkin IV fractures. Clin Orthop Relat Res. 2009;467(4):929–33.CrossRefPubMed
50.
Zurück zum Zitat Jaskulka RA, Fischer G, Fenzl G. Dislocation and fracture-dislocation of the hip. J Bone Joint Surg Bri Vol. 1991;73(3):465–9.CrossRef Jaskulka RA, Fischer G, Fenzl G. Dislocation and fracture-dislocation of the hip. J Bone Joint Surg Bri Vol. 1991;73(3):465–9.CrossRef
51.
Zurück zum Zitat Gavaskar AS, Tummala NC. Ganz surgical dislocation of the hip is a safe technique for operative treatment of Pipkin fractures. Results of a prospective trial. J Orthop Trauma. 2015;29(12):544–8.CrossRefPubMed Gavaskar AS, Tummala NC. Ganz surgical dislocation of the hip is a safe technique for operative treatment of Pipkin fractures. Results of a prospective trial. J Orthop Trauma. 2015;29(12):544–8.CrossRefPubMed
52.
Zurück zum Zitat Siebenrock KA, Gautier E, Woo AK, et al. Surgical dislocation of the femoral head for joint debridement and accurate reduction of fractures of the acetabulum. J Orthop Trauma. 2002;16(8):543–52.CrossRefPubMed Siebenrock KA, Gautier E, Woo AK, et al. Surgical dislocation of the femoral head for joint debridement and accurate reduction of fractures of the acetabulum. J Orthop Trauma. 2002;16(8):543–52.CrossRefPubMed
Metadaten
Titel
3D printing-based Ganz approach for treatment of femoral head fractures: a prospective analysis
verfasst von
Jinwu Wang
Leyi Cai
Linzhen Xie
Hua Chen
Xiaoshan Guo
Kehe Yu
Publikationsdatum
01.12.2019
Verlag
BioMed Central
Erschienen in
Journal of Orthopaedic Surgery and Research / Ausgabe 1/2019
Elektronische ISSN: 1749-799X
DOI
https://doi.org/10.1186/s13018-019-1383-7

Weitere Artikel der Ausgabe 1/2019

Journal of Orthopaedic Surgery and Research 1/2019 Zur Ausgabe

Arthropedia

Grundlagenwissen der Arthroskopie und Gelenkchirurgie. Erweitert durch Fallbeispiele, Videos und Abbildungen. 
» Jetzt entdecken

Update Orthopädie und Unfallchirurgie

Bestellen Sie unseren Fach-Newsletter und bleiben Sie gut informiert.