Background
With the rapid development of modern industry, a large number of heavy metals are discharged into the environment along with waste water, waste residue and waste gas from industrial and agricultural activities, resulting in environmental heavy metal contamination [
1]. Heavy metals in the natural environment could enter human body via a variety of ways and can accumulate in the body [
2‐
4], affecting normal organism physiological functions and causing inflammation and a variety of diseases, including cancer [
5].
Cordyceps sinensis (BerK). Sacc is a parasitic fungus that grows on the larva of Lepidoptera. It is a Traditional Chinese Medicine known as DongChong-XiaCao (winter worm-summer grass) [
6,
7]. It can effectively regulate the immune system and protect the nervous system, with anti-tumour properties [
7,
8]. In recent years, the price of
C. sinensis has risen dramatically [
9], due to its efficacy and the scarcity of resources, and at present, the price of
C. sinensis in different specifications ranges from $30,000 to $100,000 per kilogram. At the same time, concerns about the heavy metal As in
C. sinensis have also grown with reports of high As content in
C. sinensis. Our previous study found that contents of arsenic in 20 batches of
C. sinensis were 2.59–12.56 mg kg
−1 [
10]. The excess rate of As was 88.24% based on the international standards of Chinese Medicine-Chinese Herbal Medicine Heavy Metal Limit (4 mg kg
−1 for As) [
11].
Chemical speciations of arsenic in nature include arsenate [As(V)], arsenite [As(III)], methylarsonic acid (MMA), dimethylarsinic acid (DMA), arsenobetaine (AsB), and arsenocholine (AsC), etc. [
12]. Studies have shown that inorganic arsenic species are the most dangerous species of arsenic, and As(III) is more toxic than As(V), with the toxicity of As(III) almost 60 times that of As(V). MMA and DMA are considered to be hypotoxic; however, arsenosugars and arsenic greases are believed to be non-toxic [
13,
14]. As(III) has a strong affinity with enzymes and the SH and NH groups of proteins in the body, and it can combine with thiols to form stable complexes that can hinder the cell’s normal metabolism and inhibit some enzymes [
15,
16].
At present, the heavy metal problem of
C. sinensis has received extensive attention. Previous researches on the heavy metal of
C. sinensis mainly focused on its determination method and content, while researches on the species of As contained and the bioaccessibilities and health risk of heavy metals of
C. sinensis considering its usage were rarely reported. In this study, we focused on the dietary exposure and bioaccessibilities of As, Cu, Pb, Cd and Hg and the variety of As species present in
C. sinensis [
17,
18], aiming to assess the risks of heavy metals and supplement the research on the safety of
C. sinensis.
Instrumentation
An ICP-MS (ICAP-Q, Thermo Fisher Scientific, Analytical System, United States, Massachusetts) operating under normal multi-element tuning conditions was used to determine the total levels of As, Cu, Pb, Cd and Hg. The main analytical parameters were as follows: RF forward power, 1550 W; plasma argon flow rate, 13.98 L min−1; auxiliary argon flow rate, 0.80 L min−1; nebulizer argon flow rate, 1.10 L min−1; integration time, 0.02 s per point; and points per peak, 3.
An ICP-MS was used as the detector system following species separation by HPLC for arsenic speciation analysis, and the column effluent was directly introduced into a nebulizer and spray chamber. Data were collected by single ion monitoring at m/z 75. For chromatographic separation, a high-pressure pump (Ultimate 3000 RSLCnano, Thermo Fisher Scientific, United States, Massachusetts) was used as the sample delivery system. A Dionex IonPacTM AS7 column (2 × 250 mm Thermo Fisher Scientific, United States, Massachusetts) was used for arsenic speciation analysis. The mobile phases were 0.1 mol L−1 ammonium carbonate (A) and 4 nmol L−1 ammonium carbonate (B). The elution gradient system was 0% B (0–2.5 min), 0–100% B (2.5–8 min), 100% B (8–10 min), 100–0% B (10–10.01 min), 0% B (10.01–20 min). The flow rate was 0.25 mL min−1. The injection volume was 20 μL.
Calibration standards and reagents
The single-element standard solutions (1000 mg L−1) of Cu, Pb, As, Cd, and Hg, purchased from the National Standard Material Center (Beijing, China), were used as the standard calibration solutions. Standard solutions of As As(III), As(V), MMA, AsC and AsB, purchased from the National Standard Material Center (Beijing, China) were used as the standard source solutions, with their concentrations guaranteed. DMA certified reference material was prepared from commercially available reagents, with its purity evaluated before use. Working mixture standard solutions were prepared daily by diluting the source standard solutions to proper concentrations with pure water. Deionized water (18.2 MΩ) purified with a Milli-Q system (Millipore, Inc, Spain) was used for all solution preparation. Plasticware and glassware were maintained in 15% HNO3 for 24 h before use.
Simulated gastrointestinal juices
Simulated gastric juice (pH 1.8 ± 0.1) was prepared by dissolving 10.0 g of pepsin in 800 mL deionized water, then 16.4 mL of dilute hydrochloric acid (prepared by diluting 234 mL of concentrated hydrochloric acid to 1000 mL with deionized water) was added, and finally, additional deionized water was added to bring the total volume up to 1000 mL.
Simulated intestinal juice was prepared just before use by mixing equal volumes of A and B solutions. (Solution A was 6.8 g of potassium dihydrogen phosphate dissolved in 500 mL of water, and 0.1 mol L
−1 NaOH was used to adjust the pH to 6.8. Solution B was 10 g of pancreatin dissolved in water up to 500 mL) [
19].
Cordyceps sinensis samples
Three 30 g batches of
C. sinensis samples were collected from Qinghai Province and were numbered 1, 2, and 3. All samples were dried at 40 °C and stored at 4 °C before analysis [
20].
Sample preparation for contents determination of Cu, Pb, As, Cd, and Hg by ICP-MS
Each batch of C. sinensis samples were equally divided into two parts. One part, the whole C. sinensis (W), was ground with a mortar and passed through a 50-mesh sieve and numbered W1, W2, and W3, respectively. The other part was separated into stroma (S) and caterpillar body (C), and those two portions were separately ground with a mortar and passed through a 50-mesh sieve and numbered S1, S2, S3 and C1, C2, C3, respectively.
The whole C. sinensis samples, stroma samples and caterpillar body samples were digested with a microwave digestion system. Approximately 0.2 g of each sample was precisely weighed and transferred in PTEF vessels with 5 mL of concentrated HNO3 and 1 mL of H2O2. The operating procedure of the microwave system was as follows: the samples were heated at 100 °C for 3 min in the 1st step, 160 °C for 8 min in the 2nd step, and 190 °C for 30 min in the 3rd step, and then cooled to room temperature. The sample solutions were diluted to 50 mL with pure water. The blank and reference materials (carrots) were prepared at the same time under the same procedure.
Method validation
The method was fully validated by characteristic indices including linearity, limit of detection (LOD), limit of quantitation (LOQ), accuracy, and stability.
Dilute nitric acid solution extraction
5 mL of dilute nitric acid solution (HNO
3: water = 2: 98) was added to precisely weighed 0.2 g samples of whole
C. sinensis, stroma and caterpillar body, respectively. The mixtures were soaked overnight, then heated in a thermostatic water bath for 120 min at 90 °C and shaken for 1 min every 30 min. The mixture was cooled to room temperature and centrifuged at 11.5
g for 10 min after extraction. The supernatants were removed, and 5 mL of dilute nitric acid solution was added to the remaining pellets. The extraction was repeated using procedure described above. The combined supernatants from the two rounds of extraction were analysed immediately after filtration. The procedure was performed in triplicate [
21].
In vitro gastrointestinal digestion of whole C. sinensis, stroma and caterpillar body for arsenic speciation analysis
Gastric digestion
The prepared gastric juice (5 mL) was added to 0.5 g of precisely weighted whole C. sinensis, stroma and caterpillar body samples, respectively. Then the samples were heated for 1 h in a water bath, shaken for 30 min in a shaker (250 r min−1), and heated for an additional 3 h at 38 °C. The mixture was centrifuged at 11.5g for 10 min, and the collected supernatant was used as gastric digestion extract solution.
Intestinal digestion
The prepared intestinal juice (5 mL) was added to the solid fraction obtained in the gastric digestion, following the digestion procedure as above. The residue was discarded.
The supernatant was passed through a 0.45 µm PVDF syringe-type filter before analysis. The procedure was performed in triplicate [
22].
Preparation of in vitro gastrointestinal solution samples for determination of Cu, Pb, As, Cd and Hg content by ICP-MS
After digestion, the two liquid extracts were mineralized in a microwave oven. The samples were appropriately diluted before analysis.
Health risk assessment of heavy metals
To evaluate the potential acute or long-term hazards from exposure to heavy metals in
C. sinensis, the DI, DE, and THQ of heavy metals were calculated using the following formulas [
23].
$$ {\text{DI}} = C \times {\text{ FIR}} $$
where DI is the dietary intake of the heavy metal (µg person
−1 day
−1), C is the measured concentration of the heavy metal in the samples and FIR is the daily dose (g), which was taken as the maximum daily dose (9 g) recommended by the “Chinese Pharmacopoeia” standard.
$$ {\text{DE }} = {\text{ DI}}/{\text{ WAB}} $$
where DE is the dietary exposure (µg kg
−1 body weight day
−1) and WAB is the average individual body weight (62 kg).
For noncancerous effects, the target hazard quotient (THQ) developed by the US EPA (1989) has been used to evaluate potential health risks associated with long-term exposure to chemical pollutants in foodstuffs and was therefore used to assess the health risks from heavy metals in
C. sinensis over a lifetime in this study. A THQ value higher than 1 indicates that those ingested
C. sinensis are affecting health adversely to some extent. And if the THQ value is less than 1, it suggests that the amount of heavy metal exposed to the body has no significant effect on human health.
$$ THQ = \frac{{C \times {\text{FE}} \times {\text{ED}} \times {\text{FIR}}}}{{{\text{WAB}} \times {\text{AT}} \times {\text{RFD}} \times 1000}} $$
$$ {\text{BTHQ }} = THQ \times {\text{Bio}}-{\text{accessibility}}_{\text{HM}} $$
where C is the measured concentration of heavy metal in
C. sinensis; EF is the exposure frequency (90 day per year); ED is the exposure duration (50 years); FIR is the daily dose (9 g); AT is the averaging time for non-carcinogens (70 × 365 day); RFD is the oral reference dose provided by the US EPA (Cu = 0.04 µg g
−1 day
−1 body weight, Pb = 0.0035 µg g
−1 day
−1 body weight, As = 0.0003 µg g
−1 day
−1 body weight, Cd = 0.001 µg g
−1 day
−1 body weight, Hg = 0.0005 µg g
−1 day
−1 body weight); 10
−3 is the unit conversion factor; WAB is the average individual body weight (62 kg).
It has been observed that using the total concentrations of heavy metals may overestimate the amount absorbed through oral ingestion; the oral bioaccessibility is defined as the fraction of a compound that is released from its matrix in the gastrointestinal tract, and thus becomes available for intestinal absorption, i.e., enters the blood stream [
24]. The bioaccessibility value is used to avoid overestimating risk.
Discussion
Bioaccessibility for heavy metal in C. sinensis
Bioaccessibility is defined as the proportion of a pollutant that can be dissolved in the gastrointestinal environment, indicating the relative amount of the pollutant in the matrix that can be absorbed by the body, and higher bioaccessibilities indicate greater potentials for absorbing pollutants. The heavy metals in Chinese herbal medicines enter the body through gastrointestinal tract, and cannot be 100% absorbed by digestive system. Therefore, the health risk of heavy metal could be overestimated if the total content of the heavy metal is used to carry out risk assessment instead of the total absorption content. Thus, bioaccessibility may be more accurate in assessing risks of heavy metals in Chinese herbal medicine.
Common methods for determining bioaccessibility of heavy metals are in vitro experiments; in this case, a simulated of gastrointestinal method was used for the simple method, short experimental period, and easily controlled experimental conditions. Dynamic in vitro gastrointestinal models mimic the gradual transit of ingested compounds through the digestive tract. In recent years, this method has been widely used to assess the risks of heavy metals in foods [
20,
25,
26]. Studies have shown that the biochemical properties of heavy metals at various digestive stages are related to the characteristics of the heavy metals, their existent morphology, the type of matrix, and so on [
27]. In this study, the bioaccessibility of heavy metals in
C. sinensis and the morphology of arsenic in artificial gastrointestinal fluid were evaluated by in vitro experiments. The risks of heavy metals in
C. sinensis were evaluated scientifically.
As in vitro gastrointestinal digestion
Based on results of in vitro experiments, the bioaccessibility of arsenic in C. sinensis was 64.46%, indicating that arsenic in the C. sinensis could not be 100% dissolved by the artificial gastrointestinal fluid. And there were still a large number of unidentified arsenic species in the artificial gastrointestinal extract solution.
Cordyceps sinensis is usually consumed for a long period of time to improve health. It is generally recommended to take C. sinensis for 2–3 months each year. The target hazard quotient (THQ) was used in this research, taking into consideration of daily dose and factors including most commonly consumed dosage forms and duration of consumption to evaluate potential and long-term risk of heavy metals in C. sinensis to human body. In the calculation of the THQ value, the duration of consumption was assumed to be 90 days, and the dosage was “the maximum dosage of 9 g recommended in Chinese Pharmacopoeia (2015 version)”. However, under actual conditions, the dosage is usually much less than 9 g because of the extremely high cost of C. sinensis, so the calculated THQ value is greater than its actual value and suggests an inflated risk. The experimental results suggested that there is no obvious risk from heavy metals in C. sinensis to human body. However, it is worth noting that the BTHQ value of arsenic is 0.5334 and the TBTHQ is 0.5440. If the required course of C. sinensis is longer than 90 days, the dose of C. sinensis needs to be reduced to avoid damage to the body from heavy metals.
Different medicinal materials grow in different environments with different life cycles and properties, causing variations in heavy metal contents. The unified standards of heavy metals in Chinese herbal medicines ignore some special properties of medicinal herbs. Chinese medicine is different from food in usages and dosages. Mode and frequency of drug use should be taken into consideration to get more equitable results of evaluation and standardization, when evaluating the risks of heavy metals and determining the standards for heavy metals in Chinese herbal medicines. This study showed that the heavy metals in C. sinensis present no obvious risks to human health in a reasonable taking way, indicating the excess of heavy metals in C. sinensis might be attributed to the unduly strict standard, and the heavy metal standards for C. sinensis need to loose properly.
Conclusion
The five heavy metals cannot be 100% absorbed by human body. The content of arsenic in C. sinensis is high, but inorganic arsenic of strong toxic accounted for only 8.69% of the total in dilute nitric acid extracted solutions and for merely 2.33% of the total in the in vitro gastrointestinal solutions. The dietary exposure values of Cu, Pb, As, Cd and Hg were lower than the safety limits set by the Joint FAO/WHO Expert Committee on Food Additives (JFCFA) and the BTHQ of these heavy metals were all less than 1. The heavy metals in C. sinensis present no obvious risks to human health in a reasonable taking way. Perhaps, it is the time to loose the heavy metal standards for C. sinensis properly.
Authors’ contributions
HLQ and GLP substantial contributions to the conception or design of the work. ZL and WS collected the samples. ZL, HQX and KLP performed the ICP-MS and HPLC–ICP-MS analysis experiment and collected data. YWZ and JJY prepared the Cordyceps sinensis samples. YJ and KCZ provided a great help and careful guide for the modification of manuscript including the data processing analysis and grammar part. All authors read and approved the final manuscript.