nach oben

Clinical Oral Investigations

Erschienen in:

12.05.2018 | Original Article

Both operator and heat treatment determine the centring ability of Reciproc® files in vitro

verfasst von: N. Hofmann

Erschienen in: Clinical Oral Investigations | Ausgabe 2/2019

Einloggen, um Zugang zu erhalten

Abstract

Objectives

To determine the shaping ability of reciprocating files without/with post-manufacturing heat treatment (Reciproc®/Reciproc blue®, VDW) when used by six operators of similar level of experience.

Materials and methods

Plastic training blocs with curved root canals (5 mm radius, 55° angle) were mounted in a dental manikin. Each operator prepared six specimens with each instrument system using the file sizes R25, R40 and R50 consecutively. Specimens were photographed, and deviations from the centre of the canal were measured at intervals of 0.5 mm and averaged for the apical, middle and coronal part of the canal. Data were tested for significance using the Mann-Whitney U test and two-way ANOVA with instrument systems and operators serving as factors.

Results

Deviations were observed towards the outer curvature in the apical and coronal and to the inner curvature in the middle segment of the canal. They were larger after using larger size instruments and were smaller when using Reciproc blue® compared to Reciproc®. Significant differences among operators were observed in the middle (all sizes) and coronal part of the canals (only sizes R25 und R40). Coronally, interaction between the main factors was significant as well.

Conclusions

Post-manufacturing heat treatment significantly improved shaping ability of the reciprocating file system Reciproc®. The observed differences among operators suggest the possibility of further improvement by providing specific training for prospective users.

Clinical relevance

Maintenance of root canal curvature may be improved by using post-manufacturing heat-treated instruments, but specific training should be recommended as well.

Nur mit Berechtigung zugänglich

European Society of Endodontology (2006) Quality guidelines for endodontic treatment: consensus report of the European Society of Endodontology. Int Endod J 39(12):921–930CrossRef

Weine FS, Kelly RF, Lio PJ (1975) The effect of preparation procedures on original canal shape and on apical foramen shape. J Endod 1(8):255–262. https://doi.org/10.1016/S0099-2399(75)80037-9CrossRefPubMed

Glickman G, Dumsha T (1997) Problems in canal cleaning and shaping. In: Gutmann J, Dumsha T, Lovdahl P, Hovland E (eds) Problem solving in endodontics, 3rd edn. Mosby, St Louis, MO, pp 91–122

Roane JB, Sabala CL, Duncanson MG Jr (1985) The "balanced force" concept for instrumentation of curved canals. J Endod 11(5):203–211. https://doi.org/10.1016/S0099-2399(85)80061-3CrossRefPubMed

Walia HM, Brantley WA, Gerstein H (1988) An initial investigation of the bending and torsional properties of nitinol root canal files. J Endod 14(7):346–351CrossRef

Shen Y, Zhou HM, Zheng YF, Peng B, Haapasalo M (2013) Current challenges and concepts of the thermomechanical treatment of nickel-titanium instruments. J Endod 39(2):163–172. https://doi.org/10.1016/j.joen.2012.11.005CrossRefPubMed

Walid N (2017) Review and classification of heat treatment procedures of Niti instruments and its implication on files fatigue. Open access. J Dent Sci Res 2(2):1–9

Johnson E, Lloyd A, Kuttler S, Namerow K (2008) Comparison between a novel nickel-titanium alloy and 508 nitinol on the cyclic fatigue life of ProFile 25/.04 rotary instruments. J Endod 34(11):1406–1409CrossRef

Pereira ES, Peixoto IF, Viana AC, Oliveira II, Gonzalez BM, Buono VT, Bahia MG (2011) Physical and mechanical properties of a thermomechanically treated NiTi wire used in the manufacture of rotary endodontic instruments. Int Endod J 45:469–474. https://doi.org/10.1111/j.1365-2591.2011.01998.xCrossRefPubMed

10.

Montalvao D, Alcada FS, Braz Fernandes FM, de Vilaverde-Correia S (2014) Structural characterisation and mechanical FE analysis of conventional and M-wire Ni-Ti alloys used in endodontic rotary instruments. ScientificWorldJournal 2014:976459. https://doi.org/10.1155/2014/976459CrossRefPubMedPubMedCentral

11.

Al-Hadlaq SM, Aljarbou FA, AlThumairy RI (2010) Evaluation of cyclic flexural fatigue of M-wire nickel-titanium rotary instruments. J Endod 36(2):305–307. https://doi.org/10.1016/j.joen.2009.10.032CrossRefPubMed

12.

Lopes HP, Gambarra-Soares T, Elias CN, Siqueira JF Jr, Inojosa IF, Lopes WS, Vieira VT (2013) Comparison of the mechanical properties of rotary instruments made of conventional nickel-titanium wire, M-wire, or nickel-titanium alloy in R-phase. J Endod 39(4):516–520. https://doi.org/10.1016/j.joen.2012.12.006CrossRefPubMed

13.

Gao Y, Gutmann JL, Wilkinson K, Maxwell R, Ammon D (2012) Evaluation of the impact of raw materials on the fatigue and mechanical properties of ProFile vortex rotary instruments. J Endod 38(3):398–401. https://doi.org/10.1016/j.joen.2011.11.004CrossRefPubMed

14.

Pereira ES, Gomes RO, Leroy AM, Singh R, Peters OA, Bahia MG, Buono VT (2013) Mechanical behavior of M-wire and conventional NiTi wire used to manufacture rotary endodontic instruments. Dent Mater 29(12):e318–e324. https://doi.org/10.1016/j.dental.2013.10.004CrossRefPubMed

15.

Elnaghy AM, Elsaka SE (2015) Torsion and bending properties of OneShape and WaveOne instruments. J Endod 41(4):544–547. https://doi.org/10.1016/j.joen.2014.11.010CrossRefPubMed

16.

Yamamura B, Cox TC, Heddaya B, Flake NM, Johnson JD, Paranjpe A (2012) Comparing canal transportation and centering ability of endosequence and vortex rotary files by using micro-computed tomography. J Endod 38(8):1121–1125. https://doi.org/10.1016/j.joen.2012.04.019CrossRefPubMed

17.

da Silva Limoeiro AG, Dos Santos AH, De Martin AS, Kato AS, Fontana CE, Gavini G, Freire LG, da Silveira Bueno CE (2016) Micro-computed tomographic evaluation of 2 nickel-titanium instrument systems in shaping root canals. J Endod 42(3):496–499. https://doi.org/10.1016/j.joen.2015.12.007CrossRefPubMed

18.

Shen Y, Zhou H, Coil JM, Aljazaeri B, Buttar R, Wang Z, Zheng YF, Haapasalo M (2015) ProFile vortex and vortex blue nickel-titanium rotary instruments after clinical use. J Endod 41(6):937–942. https://doi.org/10.1016/j.joen.2015.02.003CrossRefPubMed

19.

Wu SK, Lin HC, Chou TS (1990) A study of electrical-resistivity, internal-friction and shear modulus on an aged Ti49ni51 alloy. Acta Metall Mater 38(1):95–102. https://doi.org/10.1016/0956-7151(90)90137-6CrossRef

20.

Pereira ES, Amaral CC, Gomes JA, Peters OA, Buono VT, Bahia MG (2017) Influence of clinical use on physical-structural surface properties and electrochemical potential of NiTi endodontic instruments. Int Endod J 51:515–521. https://doi.org/10.1111/iej.12768CrossRefPubMed

21.

Tsujimoto M, Irifune Y, Tsujimoto Y, Yamada S, Watanabe I, Hayashi Y (2014) Comparison of conventional and new-generation nickel-titanium files in regard to their physical properties. J Endod 40(11):1824–1829. https://doi.org/10.1016/j.joen.2014.06.009CrossRefPubMed

22.

Duke F, Shen Y, Zhou H, Ruse ND, Wang ZJ, Hieawy A, Haapasalo M (2015) Cyclic fatigue of ProFile vortex and vortex blue nickel-titanium files in single and double curvatures. J Endod 41(10):1686–1690. https://doi.org/10.1016/j.joen.2015.06.012CrossRefPubMed

23.

Pereira ES, Viana AC, Buono VT, Peters OA, Bahia MG (2015) Behavior of nickel-titanium instruments manufactured with different thermal treatments. J Endod 41(1):67–71. https://doi.org/10.1016/j.joen.2014.06.005CrossRefPubMed

24.

Nguyen HH, Fong H, Paranjpe A, Flake NM, Johnson JD, Peters OA (2014) Evaluation of the resistance to cyclic fatigue among ProTaper next, ProTaper universal, and vortex blue rotary instruments. J Endod 40(8):1190–1193. https://doi.org/10.1016/j.joen.2013.12.033CrossRefPubMed

25.

Plotino G, Grande NM, Cotti E, Testarelli L, Gambarini G (2014) Blue treatment enhances cyclic fatigue resistance of vortex nickel-titanium rotary files. J Endod 40(9):1451–1453. https://doi.org/10.1016/j.joen.2014.02.020CrossRefPubMed

26.

Shen Y, Hieawy A, Huang X, Wang ZJ, Maezono H, Haapasalo M (2016) Fatigue resistance of a 3-dimensional conforming nickel-titanium rotary instrument in double curvatures. J Endod 42(6):961–964. https://doi.org/10.1016/j.joen.2016.02.012CrossRefPubMed

27.

De-Deus G, Silva EJ, Vieira VT, Belladonna FG, Elias CN, Plotino G, Grande NM (2017) Blue thermomechanical treatment optimizes fatigue resistance and flexibility of the Reciproc files. J Endod 43(3):462–466. https://doi.org/10.1016/j.joen.2016.10.039CrossRefPubMed

28.

Field A (2009) Discovering statistics using SPSS, 3rd edn. Sage, Los Angeles

29.

Lim KC, Webber J (1985) The validity of simulated root canals for the investigation of the prepared root canal shape. Int Endod J 18(4):240–246CrossRef

30.

Ahmad M (1989) The validity of using simulated root canals as models for ultrasonic instrumentation. J Endod 15(11):544–547. https://doi.org/10.1016/S0099-2399(89)80198-0CrossRefPubMed

31.

Hülsmann M, Peters OA, Dummer PMH (2005) Mechanical preparation of root canals: shaping goals, techniques and means. Endod Topics 10:30–76CrossRef

32.

Mohammadi Z, Jafarzadeh H, Shalavi S, Bandi S, Patil S (2015) Root and root canal morphology of human third molar teeth. J Contemp Dent Pract 16(4):310–313CrossRef

33.

Lee CY, Chang YY, Shieh TY, Chang CS (2015) Reasons for permanent tooth extractions in Taiwan. Asia Pac J Public Health 27(2):NP2350–NP2357. https://doi.org/10.1177/1010539512448814CrossRefPubMed

34.

Püllen F, Folberth R, Ruhmann C, Eickholz P (2013) Tooth extractions in general and due to periodontal reasons in three dental practices: a case-control study. Quintessence Int 44(4):327–338. https://doi.org/10.3290/j.qi.a29155CrossRefPubMed

35.

Vertucci FJ (2005) Root canal morphology and its relationship to endodontic procedures. Endod Topics 10:3–29CrossRef

36.

Verma P, Love RM (2011) A micro CT study of the mesiobuccal root canal morphology of the maxillary first molar tooth. Int Endod J 44(3):210–217. https://doi.org/10.1111/j.1365-2591.2010.01800.xCrossRefPubMed

37.

Gu Y, Lu Q, Wang H, Ding Y, Wang P, Ni L (2010) Root canal morphology of permanent three-rooted mandibular first molars—part I: pulp floor and root canal system. J Endod 36(6):990–994. https://doi.org/10.1016/j.joen.2010.02.030CrossRefPubMed

38.

Villas-Boas MH, Bernardineli N, Cavenago BC, Marciano M, Del Carpio-Perochena A, de Moraes IG, Duarte MH, Bramante CM, Ordinola-Zapata R (2011) Micro-computed tomography study of the internal anatomy of mesial root canals of mandibular molars. J Endod 37(12):1682–1686. https://doi.org/10.1016/j.joen.2011.08.001CrossRefPubMed

39.

Keles A, Keskin C (2017) Apical root canal morphology of mesial roots of mandibular first molar teeth with vertucci type II configuration by means of micro-computed tomography. J Endod 43(3):481–485. https://doi.org/10.1016/j.joen.2016.10.045CrossRefPubMed

40.

Bramante CM, Berbert A, Borges RP (1987) A methodology for evaluation of root canal instrumentation. J Endod 13(5):243–245. https://doi.org/10.1016/S0099-2399(87)80099-7CrossRefPubMed

41.

Peters OA, Laib A, Ruegsegger P, Barbakow F (2000) Three-dimensional analysis of root canal geometry by high-resolution computed tomography. J Dent Res 79(6):1405–1409CrossRef

42.

Peters OA, Schönenberger K, Laib A (2001) Effects of four Ni-Ti preparation techniques on root canal geometry assessed by micro computed tomography. Int Endod J 34(3):221–230CrossRef

43.

Peters OA, Peters CI, Schönenberger K, Barbakow F (2003) ProTaper rotary root canal preparation: effects of canal anatomy on final shape analysed by micro CT. Int Endod J 36(2):86–92CrossRef

44.

Paqué F, Laib A, Gautschi H, Zehnder M (2009) Hard-tissue debris accumulation analysis by high-resolution computed tomography scans. J Endod 35(7):1044–1047. https://doi.org/10.1016/j.joen.2009.04.026CrossRefPubMed

45.

Paqué F, Peters OA (2011) Micro-computed tomography evaluation of the preparation of long oval root canals in mandibular molars with the self-adjusting file. J Endod 37(4):517–521. https://doi.org/10.1016/j.joen.2010.12.011CrossRefPubMed

46.

Peters OA, Paqué F (2011) Root canal preparation of maxillary molars with the self-adjusting file: a micro-computed tomography study. J Endod 37(1):53–57. https://doi.org/10.1016/j.joen.2010.08.047CrossRefPubMed

47.

Lim KC, Webber J (1985) The effect of root canal preparation on the shape of the curved root canal. Int Endod J 18(4):233–239CrossRef

48.

Glosson CR, Haller RH, Dove SB, del Rio CE (1995) A comparison of root canal preparations using Ni-Ti hand, Ni-Ti engine-driven, and K-flex endodontic instruments. J Endod 21(3):146–151CrossRef

49.

Thompson SA, Dummer PM (1997) Shaping ability of NT engine and McXim rotary nickel-titanium instruments in simulated root canals. Part 2. Int Endod J 30(4):270–278CrossRef

50.

Sonntag D, Guntermann A, Kim SK, Stachniss V (2003) Root canal shaping with manual stainless steel files and rotary Ni-Ti files performed by students. Int Endod J 36(4):246–255CrossRef

51.

Thompson SA, Dummer PM (1997) Shaping ability of ProFile.04 taper series 29 rotary nickel-titanium instruments in simulated root canals. Part 2. Int Endod J 30(1):8–15CrossRef

52.

Bryant ST, Thompson SA, al-Omari MA, Dummer PM (1998) Shaping ability of ProFile rotary nickel-titanium instruments with ISO sized tips in simulated root canals: part 2. Int Endod J 31(4):282–289CrossRef

53.

Yared GM, Bou Dagher FE, Machtou P (2001) Influence of rotational speed, torque and operator's proficiency on ProFile failures. Int Endod J 34(1):47–53CrossRef

54.

Yared GM, Dagher FE, Machtou P, Kulkarni GK (2002) Influence of rotational speed, torque and operator proficiency on failure of greater taper files. Int Endod J 35(1):7–12CrossRef

55.

Mandel E, Adib-Yazdi M, Benhamou LM, Lachkar T, Mesgouez C, Sobel M (1999) Rotary Ni-Ti profile systems for preparing curved canals in resin blocks: influence of operator on instrument breakage. Int Endod J 32(6):436–443CrossRef

56.

Al-Omari MA, Aurich T, Wirtti S (2010) Shaping canals with ProFiles and K3 instruments: does operator experience matter? Oral Surg Oral Med Oral Pathol Oral Radiol Endod 110(3):e50–e55. https://doi.org/10.1016/j.tripleo.2010.03.003CrossRefPubMed

57.

Goldberg M, Dahan S, Machtou P (2012) Centering ability and influence of experience when using WaveOne single-file technique in simulated canals. Int J Dent 2012:206321. https://doi.org/10.1155/2012/206321CrossRefPubMedPubMedCentral

58.

Troiano G, Dioguardi M, Cocco A, Giannatempo G, Laino L, Ciavarella D, Berutti E, Lo Muzio L (2016) Influence of operator's experience on the shaping ability of protaper universal and waveone systems: a comparative study on simulated root canals. Open Dent J 10:546–552. https://doi.org/10.2174/1874210601610010546CrossRefPubMedPubMedCentral

59.

Yang Y, Shen Y, Ma J, Cao Y, Haapasalo M (2016) A micro-computed tomographic assessment of the influence of operator's experience on the quality of waveOne instrumentation. J Endod 42(8):1258–1262. https://doi.org/10.1016/j.joen.2016.04.020CrossRefPubMed

Titel: Both operator and heat treatment determine the centring ability of Reciproc® files in vitro
verfasst von: N. Hofmann
Publikationsdatum: 12.05.2018
Verlag: Springer Berlin Heidelberg
Erschienen in: Clinical Oral Investigations / Ausgabe 2/2019
Print ISSN: 1432-6981
Elektronische ISSN: 1436-3771
DOI: https://doi.org/10.1007/s00784-018-2486-y

Neu im Fachgebiet Zahnmedizin

19.04.2024 | Vorhofflimmern | Nachrichten

Newsletter bestellen

Springer Medizin

Both operator and heat treatment determine the centring ability of Reciproc® files in vitro

Abstract

Objectives

Materials and methods

Results

Conclusions

Clinical relevance

Neu im Fachgebiet Zahnmedizin

Parodontalbehandlung verbessert Prognose bei Katheterablation

Invasive Zahnbehandlung: Wann eine Antibiotikaprophylaxe vor infektiöser Endokarditis schützt

Zell-Organisatoren unter Druck: Mechanismen des embryonalen Zahnwachstums aufgedeckt

Die Oralprophylaxe & Kinderzahnheilkunde umbenannt

Newsletter

Springer Medizin

Abstract

Objectives

Materials and methods

Results

Conclusions

Clinical relevance

Bitte loggen Sie sich ein, um Zugang zu diesem Inhalt zu erhalten

Weitere Artikel der Ausgabe 2/2019

Micro-CT evaluation of different final irrigation protocols on the removal of hard-tissue debris from isthmus-containing mesial root of mandibular molars

The ratios of pro-inflammatory to anti-inflammatory cytokines in the serum of chronic periodontitis patients with and without type 2 diabetes and/or smoking habit

Breakdown of demarcated opacities related to molar-incisor hypomineralization: a longitudinal study

The relationship between masticatory ability, age, and dental and prosthodontic status in an institutionalized elderly dentate population in Qingdao, China

Laterally positioned flap along with acellular dermal matrix graft in the management of maxillary localized recessions

Tooth sectioning for coronectomy: how to perform?

Neu im Fachgebiet Zahnmedizin

Parodontalbehandlung verbessert Prognose bei Katheterablation

Invasive Zahnbehandlung: Wann eine Antibiotikaprophylaxe vor infektiöser Endokarditis schützt

Zell-Organisatoren unter Druck: Mechanismen des embryonalen Zahnwachstums aufgedeckt

Die Oralprophylaxe & Kinderzahnheilkunde umbenannt

Newsletter