nach oben

Odontology

Erschienen in:

13.10.2021 | Original Article

The effect of functionalized titanium dioxide nanotube reinforcement on the water sorption and water solubility properties of flowable bulk-fill composite resins

verfasst von: Mustafa Kutay Karaca, Ozge Kam Hepdeniz, Banu Esencan Turkaslan, Osman Gurdal

Erschienen in: Odontology | Ausgabe 2/2022

Einloggen, um Zugang zu erhalten

Abstract

The aim of this study was to investigate the effects of titanium dioxide nanotube addition on the water sorption and water solubility values of different composite resins. Titanium dioxide nanotubes were synthesized from titanium dioxide powder in anatase form and in 13 nm diameter by hydrothermal process and then functionalized with methacrylic acid. Characterization of the nanotubes was performed by scanning electron microscopy, energy-dispersive X-ray spectroscopy, X-ray diffraction and Fourier transform infrared spectroscopy. A flowable composite resin (Filtek Ultimate Flowable) and four flowable bulk-fill composite resins (Filtek Bulk Fill Flowable, SDR Bulk Fill Flowable, Venus Bulk Fill, X-tra Base) were tested. Two groups of each composite resin were prepared: groups of the resins without nanotubes; groups of the resins reinforced with 1.0 wt% functionalized titanium dioxide nanotube. Sorption and solubility in water were assessed according to ISO 4049 standards after 1, 7, 14, 21 days immersion periods. Data were analyzed using Mann–Whitney U and Kruskal–Wallis H tests (p < 0.05). Long cylindrical tubular structures with a diameter of 41.09–72.49 nm were observed in electron microscopy analysis. The band at 1636 cm^− 1 showed the existence of the vinyl (C=C) bond of methacrylic acid coordinated to the nanotubes in Fourier transform infrared spectroscopy analysis. None of the materials tested in this study exceeded the maximum sorption and solubility values established by ISO. Regarding the water solubility, negative values were obtained. TiO₂ nanotube reinforcement decreased the water sorption and solubility values significantly at different evaluation periods in all composite resins except for Venus (p < 0.05).

Liu Y, Tan Y, Lei T, Xiang Q, Han Y, Huang B. Effect of porous glass–ceramic fillers on mechanical properties of light-cured dental resin composites. Dent Mater. 2009;25:709–15.PubMedCrossRef

Chandki R, Kala M, Kumar KN, Brigit B, Banthia P, Banthia R. ‘Nanodentistry’: exploring the beauty of miniature. J Clin Exp Dent. 2012;4:119–24.CrossRef

Dafar MO, Grol MW, Canham PB, Dixon SJ, Rizkalla AS. Reinforcement of flowable dental composites with titanium dioxide nanotubes. Dent Mater. 2016;32:817–26.PubMedCrossRef

Sun J, Forster AM, Johnson PM, Eidelman N, Quinn G, Schumacher G, Zhang X, Wu W. Improving performance of dental resins by adding titanium dioxide nanoparticles. Dent Mater. 2011;27:972–82.PubMedCrossRef

Zhao J, Xie D. Effect of nanoparticles on wear resistance and surface hardness of a dental glass-ionomer cement. J Compos Mater. 2009;43:2739–52.CrossRef

Shirkavand S, Moslehifard E. Effect of TiO2 nanoparticles on tensile strength of dental acrylic resins. J Dent Res Dent Clin Dent Prospects. 2014;8:197–203.PubMedPubMedCentral

Reijnders L. The release of TiO2 and SiO2 nanoparticles from nanocomposites. Polym Degrad Stab. 2009;94:873–6.CrossRef

Xu X, Wang Y, Liao S, Wen ZT, Fan Y. Synthesis and characterization of antibacterial dental monomers and composites. J Biomed Mater Res Part B Appl Biomater. 2012;100:1151–62.CrossRef

Yu B, Ahn JS, Lim JI, Lee YK. Influence of TiO2 nanoparticles on the optical properties of resin composites. Dent Mater. 2009;25:1142–7.PubMedCrossRef

10.

Guimarães GMF, Bronze-Uhle ES, Lisboa-Filho PN, Fugolin APP, Borges AFS, Gonzaga CC, Pfeifer CS, Furuse AY. Effect of the addition of functionalized TiO₂ nanotubes and nanoparticles on properties of experimental resin composites. Dent Mater. 2020;36:1544–56.PubMedCrossRef

11.

Xia Y, Zhang F, Xie H, Gu N. Nanoparticle-reinforced resin-based dental composites. J Dent. 2008;36:450–5.PubMedCrossRef

12.

Oliveira WF, Arruda IRS, Silva GMM, Machado G, Coelho LCBB, Correia MTS. Functionalization of titanium dioxide nanotubes with biomolecules for biomedical applications. Mater Sci Eng C Mater Biol Appl. 2017;81:597–606.PubMedCrossRef

13.

Abdulrazzaq Naji S, Behroozibakhsh M, Jafarzadeh Kashi TS, Eslami H, Masaeli R, Mahgoli H, Tahriri M, Ghavvami Lahiji M, Rakhshan V. Effects of incorporation of 2.5 and 5 wt% TiO2 nanotubes on fracture toughness, flexural strength, and microhardness of denture base poly methyl methacrylate (PMMA). J Adv Prosthodont. 2018;10:113–21.PubMedPubMedCentralCrossRef

14.

Ramos-Tonello CM, Lisboa-Filho PN, Arruda LB, Tokuhara CK, Oliveira RC, Furuse AY, Rubo JH, Borges AFS. Titanium dioxide nanotubes addition to self-adhesive resin cement: effect on physical and biological properties. Dent Mater. 2017;33:866–75.PubMedCrossRef

15.

Khaled S, Miron RJ, Hamilton DW, Charpentier PA, Rizkalla AS. Reinforcement of resin based cement with titania nanotubes. Dent Mater. 2010;26:169–78.PubMedCrossRef

16.

Mirjalili A, Zamanian A, Hadav SMM. The effect of TiO₂ nanotubes reinforcement on the mechanical properties and wear resistance of silica micro-filled dental composites. J Compos Mater. 2019;53:3217–28.CrossRef

17.

Lewandowska Ż, Piszczek P, Radtke A, Jędrzejewski T, Kozak W, Sadowska B. The evaluation of the impact of titania nanotube covers morphology and crystal phase on their biological properties. J Mater Sci Mater Med. 2015;26:163.PubMedPubMedCentralCrossRef

18.

Abbas G, Fleming G, Harrington E, Shortall A, Burke F. Cuspal movement and microleakage in premolar teeth restored with a packable composite cured in bulk or in increments. J Dent. 2003;31:437–44.PubMedCrossRef

19.

Moharam LM, El-Hoshy AZ, Abou-Elenein K. The effect of different insertion techniques on the depth of cure and vickers surface microhardness of two bulk-fill resin composite materials. J Clin Exp Dent. 2017;9:266–71.

20.

Zorzin J, Maier E, Harre S, Fey T, Belli R, Lohbauer U, Petschelt A, Taschner M. Bulk-fill resin composites: polymerization properties and extended light curing. Dent Mater. 2015;31:293–301.PubMedCrossRef

21.

Haugen HJ, Marovic D, Par M, Thieu MKL, Reseland JE, Johnsen GF. Bulk Fill composites have similar performance to conventional dental composites. Int J Mol Sci. 2020;21:5136.PubMedCentralCrossRef

22.

Ilie N, Bucuta S, Draenert M. Bulk-fill resin-based composites: an in vitro assessment of their mechanical performance. Oper Dent. 2013;38:618–25.PubMedCrossRef

23.

Leprince JG, Palin WM, Vanacker J, Sabbagh J, Devaux J, Leloup G. Physico-mechanical characteristics of commercially available bulk-fill composites. J Dent. 2014;42:993–1000.PubMedCrossRef

24.

Van Ende A, De Munck J, Lise DP, Van Meerbeek B. Bulk-fill composites: a review of the current literature. J Adhes Dent. 2017;19:95–109.PubMed

25.

Kasuga T, Hiramatsu M, Hoson A, Sekino T, Niihara K. Titania nanotubes prepared by chemical processing. Adv Mater. 1999;11:1307–11.CrossRef

26.

Faul F, Erdfelder E, Buchner A, Lang AG. Statistical power analyses using G*Power 3.1: tests for correlation and regression analyses. Behav Res Methods. 2009;41:1149–60.PubMedCrossRef

27.

Macak JM, Tsuchiya H, Ghicov A, Yasuda K, Hahn R, Bauer S, Schmuki P. TiO₂ nanotubes: self-organized electrochemical formation, properties and applications. Curr Opin Solid State Mater Sci. 2007;11:3–18.CrossRef

28.

Alshali RZ, Salim NA, Satterthwaite JD, Silikas N. Long-term sorption and solubility of bulk-fill and conventional resin composites in water and artificial saliva. J Dent. 2015;43:1511–8.PubMedCrossRef

29.

Berger SB, Palialol AR, Cavalli V, Giannini M. Characterization of water sorption, solubility and filler particles of light-cured composite resins. Braz Dent J. 2009;20:314–8.PubMedCrossRef

30.

Tekin TH, Figen AK, Atalı PY, Filiz BC, Pişkin MB. Full in-vitro analyses of new-generation bulk fill dental composites cured by halogen light. Mater Sci Eng C. 2017;7:436–45.CrossRef

31.

Xia X, Cai S, Hu J, Xie C. Water absorption characteristics of novel Cu/LDPE nanocomposite for use in intrauterine devices. J Biomed Mater Res B Appl Biomater. 2006;79:345–52.PubMedCrossRef

32.

Fan P, Edahl A, Leung R, Stanford J. Alternative interpretations of water sorption values of composite resins. J Dent Res. 1985;64:78–80.PubMedCrossRef

33.

Ferracane J. Elution of leachable components from composites. J Oral Rehabil. 1994;21:441–52.PubMedCrossRef

34.

Göpferich A. Mechanisms of polymer degradation and erosion. Biomaterials. 1996;17:103–14.PubMedCrossRef

35.

International Organization for Standardization. ISO 4049–2019: Dentistry: polymer-based restorative materials

36.

Misilli T, Gönülol N. Water sorption and solubility of bulk-fill composites polymerized with a third generation LED LCU. Braz Oral Res. 2017;31:80.CrossRef

37.

Øysæd H, Ruyter I. Water sorption and filler characteristics of composites for use in posterior teeth. J Dent Res. 1986;65:1315–8.PubMedCrossRef

38.

Al-Towairqi W, Hamouda I. Effect of instrument lubricant on water sorption and solubility of incrementally applied nanofilled resin composite. J Nanotechnol Nanomed Nanobiotechnol. 2017;4:019.

39.

Fortin D, Vargas MA. The spectrum of composites: new techniques and materials. J Am Dent Assoc. 2000;131:26–30.CrossRef

40.

Rahim TN, Mohamad D, Akil H, Rahman I. Water sorption characteristics of restorative dental composites immersed in acidic drinks. Dent Mater. 2012;28:63–70.CrossRef

41.

Venz S, Dickens B. NIR-spectroscopic investigation of water sorption characteristics of dental resins and composites. J Biomed Mater Res. 1991;25:1231–48.PubMedCrossRef

42.

Yap A, Lee C. Water sorption and solubility of resin-modified polyalkenoate cements. J Oral Rehabil. 1997;24:310–4.PubMedCrossRef

43.

Rosenstiel SF, Land MF, Crispin BJ. Dental luting agents: a review of the current literature. J Prosthet Dent. 1998;80:280–301.PubMedCrossRef

44.

Örtengren U, Wellendorf H, Karlsson S, Ruyter I. Water sorption and solubility of dental composites and identification of monomers released in an aqueous environment. J Oral Rehabil. 2001;28:1106–15.PubMedCrossRef

45.

Lopes LG, Filho AVJ, de Souza JB, Rabelo D, Franco EB, de Freitas GC. Influence of pulse-delay curing on sorption and solubility of a composite resin. J Appl Oral Sci. 2009;17:27–31.PubMedPubMedCentralCrossRef

46.

Kahraman R. Effects of the aluminum filler content on moisture diffusion into epoxy adhesives in distilled water and sea water. J Appl Polym Sci. 2005;98:1165–71.CrossRef

47.

Park J, Ferracane J. Water aging reverses residual stresses in hydrophilic dental composites. J Dent Res. 2014;93:195–200.PubMedCrossRef

48.

Palin W, Fleming G, Burke F, Marquis P, Randall R. The influence of short and medium-term water immersion on the hydrolytic stability of novel low shrink dental composites. Dent Mater. 2005;21:852–63.PubMedCrossRef

49.

Kloosterboer JG. Network formation by chain crosslinking photopolymerization and its applications in electronics. In: Electronic Applications, Advances in Polymer Science. Berlin: Springer; 1988. pp. 1–61.

50.

Sideridou I, Tserki V, Papanastasiou G. Study of water sorption, solubility and modulus of elasticity of light-cured dimethacrylate-based dental resins. Biomaterials. 2003;24:655–65.PubMedCrossRef

Titel: The effect of functionalized titanium dioxide nanotube reinforcement on the water sorption and water solubility properties of flowable bulk-fill composite resins
verfasst von: Mustafa Kutay Karaca
Ozge Kam Hepdeniz
Banu Esencan Turkaslan
Osman Gurdal
Publikationsdatum: 13.10.2021
Verlag: Springer Singapore
Erschienen in: Odontology / Ausgabe 2/2022
Print ISSN: 1618-1247
Elektronische ISSN: 1618-1255
DOI: https://doi.org/10.1007/s10266-021-00664-7

Neu im Fachgebiet Zahnmedizin

19.04.2024 | Vorhofflimmern | Nachrichten

Newsletter bestellen

Springer Medizin

The effect of functionalized titanium dioxide nanotube reinforcement on the water sorption and water solubility properties of flowable bulk-fill composite resins

Abstract

Neu im Fachgebiet Zahnmedizin

Parodontalbehandlung verbessert Prognose bei Katheterablation

Invasive Zahnbehandlung: Wann eine Antibiotikaprophylaxe vor infektiöser Endokarditis schützt

Zell-Organisatoren unter Druck: Mechanismen des embryonalen Zahnwachstums aufgedeckt

Die Oralprophylaxe & Kinderzahnheilkunde umbenannt

Newsletter

Springer Medizin

Abstract

Bitte loggen Sie sich ein, um Zugang zu diesem Inhalt zu erhalten

Weitere Artikel der Ausgabe 2/2022

Correction to: The effect of functionalized titanium dioxide nanotube reinforcement on the water sorption and water solubility properties of flowable bulk-fill composite resins

Virucidal efficacy of chlorhexidine: a systematic review

Effects of rice fermented extracts, “Sake Lees”, on the functional activity of odontoblast-like cells (KN-3 cells)

Cell viability of novel composite hydrogels loaded with hydroxyapatite for oral and maxillofacial bone regeneration

Is pulpotomy a promising modality in treating permanent teeth? An umbrella review

Occlusal problems, mental health issues and non-carious cervical lesions

Neu im Fachgebiet Zahnmedizin

Parodontalbehandlung verbessert Prognose bei Katheterablation

Invasive Zahnbehandlung: Wann eine Antibiotikaprophylaxe vor infektiöser Endokarditis schützt

Zell-Organisatoren unter Druck: Mechanismen des embryonalen Zahnwachstums aufgedeckt

Die Oralprophylaxe & Kinderzahnheilkunde umbenannt

Newsletter