Abstract
The first three-dimensional (3D) printing technology was invented in the early 1980s to fill the need for rapid engineering of design prototypes. The process, also known as “rapid prototyping” and “additive manufacturing,” widely expanded in the fields of architecture and manufacturing in the 1990s. Today there is a multitude of diverse 3D printing technologies that can manufacture objects using a vast array of materials, from thermoplastics and polymers to metal, capable of fulfilling most engineering and design needs. Medical applications of 3D printing have gained tremendous momentum in the last 5 years and are now used daily in hospitals and private practices around the globe. This chapter will assist the clinical practice with the informed investment in a 3D printing technology based on specific clinical needs.
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
Chepelev L, Giannopoulos AA, Tang A, Mitsouras D, Rybicki FJ. Medical 3D printing: methods to standardize terminology and report trends. 3D Print Med. 2017;3:4.
Di Prima M, Coburn J, Hwang D, Kelly J, Khairuzzaman A, Ricles L. Additively manufactured medical products – the FDA perspective. 3D Print Med. 2016;2:1.
Fishman EK, Drebin B, Magid D, et al. Volumetric rendering techniques: applications for three-dimensional imaging of the hip. Radiology. 1987;163(3):737–8.
George E, Liacouras, G. E, Rybicki FJ, Mitsouras D. Measuring and establishing the accuracy & reproducibility of 3D-printed medical models. Radiographics. 2017a; doi:10.1148/rg.2017160165.
George E, Liacouras P, Lee TC, Mitsouras D. 3D-printed patient-specific models for CT- and MRI-guided procedure planning. Am J Neuroradiol. 2017b; doi: 10.3174/ajnr.A5189 .
Giannopoulos AA, Steigner ML, George E, et al. Cardiothoracic applications of 3-dimensional printing. J Thorac Imaging. 2016;31(5):253–72.
Guenette JP, Himes N, Giannopoulos AA, Kelil T, Mitsouras D, Lee TC. Computer-based vertebral tumor cryoablation planning and procedure simulation involving two cases using MRI-visible 3D printing and advanced visualization. Am J Roentgenol. 2016;207(5):1128–31.
Hiller J, Lipson H. STL 2.0: a proposal for a universal multi-material Additive Manufacturing File format. Proc Solid Freeform Fabrication Symposium (SFF‘09), Austin, Texas 2009; p. 266–78.
Huang Y, Leu MC. NSF Additive Manufacturing Workshop Report. NSF workshop on frontiers of additive manufacturing research and education. Arlington, VA: University of Florida Center for Manufacturing Innovation; 2013.
ISO 17296-2:2015. Additive manufacturing – general principles – Part 2: Overview of process categories and feedstock. Geneva: International Organization for Standardization; 2015.
ISO/ASTM52915 - 16. Standard specification for additive manufacturing file format (AMF) version 1.2. Book of standards. West Conshohocken, PA: ASTM International; 2016.
Mayer R, Liacouras P, Thomas A, Kang M, Lin L, Simone CB II. 3D printer generated thorax phantom with mobile tumor for radiation dosimetry. Rev Sci Instrum. 2015;86(7):074301.
Mitsouras D, Liacouras P, Imanzadeh A, et al. Medical 3D printing for the radiologist. Radiographics. 2015;35(7):1965–88.
Mitsouras D, Lee TC, Liacouras P, et al. Three-dimensional printing of MRI-visible phantoms and MR image-guided therapy simulation. Magn Reson Med. 2017;77(2):613–22.
Morrison RJ, Hollister SJ, Niedner MF, et al. Mitigation of tracheobronchomalacia with 3D-printed personalized medical devices in pediatric patients. Sci Transl Med. 2015;7(285):285ra64.
Rubin GD, Dake MD, Napel SA, McDonnell CH, Jeffrey RB Jr. Three-dimensional spiral CT angiography of the abdomen: initial clinical experience. Radiology. 1993;186(1):147–52.
Tumbleston JR, Shirvanyants D, Ermoshkin N, et al. Additive manufacturing. Continuous liquid interface production of 3D objects. Science. 2015;347(6228):1349–52.
U.S. Department of Health and Human Services—Food and Drug Administration Center for Devices and Radiological Health. Use of International Standard ISO 10993-1, “Biological evaluation of medical devices - Part 1: Evaluation and testing within a risk management process”. Washington DC: U.S. Department of Health and Human Services; 2016.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2017 Springer International Publishing AG
About this chapter
Cite this chapter
Mitsouras, D., Liacouras, P.C. (2017). 3D Printing Technologies. In: Rybicki, F., Grant, G. (eds) 3D Printing in Medicine. Springer, Cham. https://doi.org/10.1007/978-3-319-61924-8_2
Download citation
DOI: https://doi.org/10.1007/978-3-319-61924-8_2
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-61922-4
Online ISBN: 978-3-319-61924-8
eBook Packages: MedicineMedicine (R0)