Skip to main content
Erschienen in: Clinical Oral Investigations 7/2014

01.09.2014 | Original Article

Qualitative and quantitative evaluation of human dental enamel after bracket debonding: a noncontact three-dimensional optical profilometry analysis

verfasst von: Fabiano G. Ferreira, Darcy F. Nouer, Nelson P. Silva, Ivana U. Garbui, Lourenço Correr-Sobrinho, Paulo R. A. Nouer

Erschienen in: Clinical Oral Investigations | Ausgabe 7/2014

Einloggen, um Zugang zu erhalten

Abstract

Objectives

The aim of this study was to undertake a qualitative and quantitative evaluation of changes on enamel surfaces after debonding of brackets followed by finishing procedures, using a high-resolution three-dimensional optical profiler and to investigate the accuracy of the technique.

Materials and methods

The labial surfaces of 36 extracted upper central incisors were examined. Before bonding, the enamel surfaces were subjected to profilometry, recording four amplitude parameters. Brackets were then bonded using two types of light-cured orthodontic adhesive: composite resin and resin-modified glass ionomer cement. Finishing was performed by three different methods: pumice on a rubber cup, fine and ultrafine aluminum oxide discs, and microfine diamond cups followed by silicon carbide brushes. The samples were subsequently re-analyzed by profilometry.

Results

Wilcoxon signed-rank test, Kruskal–Wallis test (p < 0.05) and a posteriori Mann–Whitney U test with Bonferroni correction (p < 0.0167) revealed a significant reduction of enamel roughness when diamond cups followed by silicon carbide brushes were used to finish surfaces that had remnants of resin-modified glass ionomer adhesive and when pumice was used to finish surfaces that had traces of composite resin. Enamel loss was minimal.

Conclusions

The 3D optical profilometry technique was able to provide accurate qualitative and quantitative assessment of changes on the enamel surface after debonding.

Clinical relevance

Morphological changes in the topography of dental surfaces, especially if related to enamel loss and roughness, are of considerable clinical importance. The quantitative evaluation method used herein enables a more comprehensive understanding of the effects of orthodontic bonding on teeth.
Literatur
1.
Zurück zum Zitat Edblad T, Hoffman M, Hakeberg M, Ortengren U, Milledning P, Wennerberg A (2009) Micro-topography of dental enamel and root cementum. Swed Dent J 33(1):41–48PubMed Edblad T, Hoffman M, Hakeberg M, Ortengren U, Milledning P, Wennerberg A (2009) Micro-topography of dental enamel and root cementum. Swed Dent J 33(1):41–48PubMed
2.
Zurück zum Zitat Abdelnaby YL, Al-Wakeel EES (2010) Effect of early orthodontic force on shear bond strength of orthodontic brackets bonded with different adhesive systems. Am J Orthod Dentofac Orthop 138(2):208–214CrossRef Abdelnaby YL, Al-Wakeel EES (2010) Effect of early orthodontic force on shear bond strength of orthodontic brackets bonded with different adhesive systems. Am J Orthod Dentofac Orthop 138(2):208–214CrossRef
3.
Zurück zum Zitat Al Shamsi A, Cunningham JL, Lamey PJ, Lynch E (2007) Three-dimensional measurement of residual adhesive and enamel loss on teeth after debonding of orthodontic brackets: an in-vitro study. Am J Orthod Dentofac Orthop 131(3):301CrossRef Al Shamsi A, Cunningham JL, Lamey PJ, Lynch E (2007) Three-dimensional measurement of residual adhesive and enamel loss on teeth after debonding of orthodontic brackets: an in-vitro study. Am J Orthod Dentofac Orthop 131(3):301CrossRef
4.
Zurück zum Zitat Osório R, Toledano M, Garcia-Godoy F (1998) Enamel surface morphology after bracket debonding. ASDC J Dent Child 65(5):313–317, 354PubMed Osório R, Toledano M, Garcia-Godoy F (1998) Enamel surface morphology after bracket debonding. ASDC J Dent Child 65(5):313–317, 354PubMed
5.
Zurück zum Zitat Eminkahyagil N, Arman A, Cetinşahin A, Karabulut E (2006) Effect of resin-removal methods on enamel and shear bond strength of rebonded brackets. Angle Orthod 76(2):314–321PubMed Eminkahyagil N, Arman A, Cetinşahin A, Karabulut E (2006) Effect of resin-removal methods on enamel and shear bond strength of rebonded brackets. Angle Orthod 76(2):314–321PubMed
6.
Zurück zum Zitat Karan S, Kircelli BH, Tasdelen B (2010) Enamel surface roughness after debonding. Angle Orthod 80(6):1081–1088PubMedCrossRef Karan S, Kircelli BH, Tasdelen B (2010) Enamel surface roughness after debonding. Angle Orthod 80(6):1081–1088PubMedCrossRef
7.
Zurück zum Zitat David VA, Staley RN, Bigelow HF, Jakobsen JR (2002) Remnant amount and cleanup for adhesives after debracketing. Am J Orthod Dentofac Orthop 121(3):291CrossRef David VA, Staley RN, Bigelow HF, Jakobsen JR (2002) Remnant amount and cleanup for adhesives after debracketing. Am J Orthod Dentofac Orthop 121(3):291CrossRef
8.
Zurück zum Zitat Hosein I, Sherriff M, Ireland AJ (2004) Enamel loss during bonding, debonding and cleanup with use of a self-etching primer. Am J Orthod Dentofac Orthop 126(6):717–724CrossRef Hosein I, Sherriff M, Ireland AJ (2004) Enamel loss during bonding, debonding and cleanup with use of a self-etching primer. Am J Orthod Dentofac Orthop 126(6):717–724CrossRef
9.
Zurück zum Zitat Kim SS, Park WK, Son WS, Ahn HS, Ro JH, Kim YD (2007) Enamel surface evaluation after removal of orthodontic composite remnants by intraoral sandblasting: a 3-dimensional surface profilometry study. Am J Orthod Dentofac Orthop 132(1):71–76CrossRef Kim SS, Park WK, Son WS, Ahn HS, Ro JH, Kim YD (2007) Enamel surface evaluation after removal of orthodontic composite remnants by intraoral sandblasting: a 3-dimensional surface profilometry study. Am J Orthod Dentofac Orthop 132(1):71–76CrossRef
10.
Zurück zum Zitat Gwinnett AJ, Gorelick L (1977) Microscopic evaluation of enamel after debonding: clinical application. Am J Orthod 71(6):651–665PubMedCrossRef Gwinnett AJ, Gorelick L (1977) Microscopic evaluation of enamel after debonding: clinical application. Am J Orthod 71(6):651–665PubMedCrossRef
11.
Zurück zum Zitat Fjeld M, Øgaard B (2006) Scanning electron microscopic evaluation of enamel surfaces exposed to 3 orthodontic bonding systems. Am J Orthod Dentofac Orthop 130(5):575–581CrossRef Fjeld M, Øgaard B (2006) Scanning electron microscopic evaluation of enamel surfaces exposed to 3 orthodontic bonding systems. Am J Orthod Dentofac Orthop 130(5):575–581CrossRef
12.
Zurück zum Zitat Van Waes H, Matter T, Krejci I (1997) Three-dimensional measurement of enamel loss caused by bonding and debonding of orthodontic brackets. Am J Orthod Dentofac Orthop 112(6):666–669CrossRef Van Waes H, Matter T, Krejci I (1997) Three-dimensional measurement of enamel loss caused by bonding and debonding of orthodontic brackets. Am J Orthod Dentofac Orthop 112(6):666–669CrossRef
13.
Zurück zum Zitat Field J, Waterhouse P, German M (2010) Quantifying and qualifying surface changes on dental hard tissues in vitro. J Dent 38(3):182–190PubMedCrossRef Field J, Waterhouse P, German M (2010) Quantifying and qualifying surface changes on dental hard tissues in vitro. J Dent 38(3):182–190PubMedCrossRef
14.
Zurück zum Zitat Jandt KD (2001) Atomic force microscopy of biomaterials surfaces and interfaces. Surf Sci 491(3):303–332CrossRef Jandt KD (2001) Atomic force microscopy of biomaterials surfaces and interfaces. Surf Sci 491(3):303–332CrossRef
15.
Zurück zum Zitat Zapletalová Z, Kubínek R, Vůjtek M, Novotný R (2004) Examination of dentin surface using AFM (our experience). Acta Med (Hradec Kralove) 47(4):343–346 Zapletalová Z, Kubínek R, Vůjtek M, Novotný R (2004) Examination of dentin surface using AFM (our experience). Acta Med (Hradec Kralove) 47(4):343–346
16.
Zurück zum Zitat Cehreli ZC, Lakshmipathy M, Yazici R (2008) Effect of different splint removal techniques on the surface roughness of human enamel: a three-dimensional optical profilometry analysis. Dent Traumatol 24(2):177–182PubMedCrossRef Cehreli ZC, Lakshmipathy M, Yazici R (2008) Effect of different splint removal techniques on the surface roughness of human enamel: a three-dimensional optical profilometry analysis. Dent Traumatol 24(2):177–182PubMedCrossRef
17.
Zurück zum Zitat Baysan A, Anderson P (2009) Non-contact optical profilometry for detection of surface changes of hydroxyapatite discs during acid attack. Caries Res 43:187 Baysan A, Anderson P (2009) Non-contact optical profilometry for detection of surface changes of hydroxyapatite discs during acid attack. Caries Res 43:187
18.
Zurück zum Zitat Ryf S, Flury S, Palaniappan S, Lussi A, van Meerbeek B, Zimmerli B (2012) Enamel loss and adhesive remnants following bracket removal and various clean-up procedures in vitro. Eur J Orthod 34(1):25–32PubMedCrossRef Ryf S, Flury S, Palaniappan S, Lussi A, van Meerbeek B, Zimmerli B (2012) Enamel loss and adhesive remnants following bracket removal and various clean-up procedures in vitro. Eur J Orthod 34(1):25–32PubMedCrossRef
19.
Zurück zum Zitat Flores AR, Sáez EG, Barceló F (1999) Metallic bracket to enamel bonding with a photopolymerizable resin-reinforced glass ionomer. Am J Orthod Dentofac Orthop 116(5):514–517CrossRef Flores AR, Sáez EG, Barceló F (1999) Metallic bracket to enamel bonding with a photopolymerizable resin-reinforced glass ionomer. Am J Orthod Dentofac Orthop 116(5):514–517CrossRef
20.
Zurück zum Zitat Correr Sobrinho L, Correr GM, Consani S, Sinhoreti MAC, Consani RLX (2002) Influência do tempo pós-fixação na resistência ao cisalhamento de braquetes colados com diferentes materiais. Pesqui Odontol Bras 16(1):43–49PubMedCrossRef Correr Sobrinho L, Correr GM, Consani S, Sinhoreti MAC, Consani RLX (2002) Influência do tempo pós-fixação na resistência ao cisalhamento de braquetes colados com diferentes materiais. Pesqui Odontol Bras 16(1):43–49PubMedCrossRef
21.
Zurück zum Zitat Zachrisson BU (1977) A posttreatment evaluation of direct bonding in orthodontics. Am J Orthod 71(2):173–189PubMedCrossRef Zachrisson BU (1977) A posttreatment evaluation of direct bonding in orthodontics. Am J Orthod 71(2):173–189PubMedCrossRef
22.
Zurück zum Zitat Zachrisson BU, Brobakken BO (1978) Clinical comparison of direct versus indirect bonding with different bracket types and adhesives. Am J Orthod 74(1):62–78PubMedCrossRef Zachrisson BU, Brobakken BO (1978) Clinical comparison of direct versus indirect bonding with different bracket types and adhesives. Am J Orthod 74(1):62–78PubMedCrossRef
23.
Zurück zum Zitat Jost-Brinkmann PG, Schiffer A, Miethke RR (1992) The effect of adhesive-layer thickness on bond strength. J Clin Orthod 26(11):718–720PubMed Jost-Brinkmann PG, Schiffer A, Miethke RR (1992) The effect of adhesive-layer thickness on bond strength. J Clin Orthod 26(11):718–720PubMed
24.
Zurück zum Zitat Eliades T, Brantley WA (2000) The inappropriateness of conventional orthodontic bond strength assessment protocols. Eur J Orthod 22(1):13–23PubMedCrossRef Eliades T, Brantley WA (2000) The inappropriateness of conventional orthodontic bond strength assessment protocols. Eur J Orthod 22(1):13–23PubMedCrossRef
25.
Zurück zum Zitat Kao EC, Eliades T, Rezvan E, Johnston WM (1995) Torsional bond strength and failure pattern of ceramic brackets bonded to composite resin laminate veneers. Eur J Orthod 17(6):533–540PubMedCrossRef Kao EC, Eliades T, Rezvan E, Johnston WM (1995) Torsional bond strength and failure pattern of ceramic brackets bonded to composite resin laminate veneers. Eur J Orthod 17(6):533–540PubMedCrossRef
26.
Zurück zum Zitat Eliades T, Viazis AD, Eliades G (1991) Bonding of ceramic brackets to enamel: morphologic and structural considerations. Am J Orthod Dentofac Orthop 99(4):369–375CrossRef Eliades T, Viazis AD, Eliades G (1991) Bonding of ceramic brackets to enamel: morphologic and structural considerations. Am J Orthod Dentofac Orthop 99(4):369–375CrossRef
27.
Zurück zum Zitat Arici S, Caniklioglu CM, Arici N, Ozer M, Oguz B (2005) Adhesive thickness effects on the bond strength of a light-cured resin-modified glass ionomer cement. Angle Orthod 75(2):254–259PubMed Arici S, Caniklioglu CM, Arici N, Ozer M, Oguz B (2005) Adhesive thickness effects on the bond strength of a light-cured resin-modified glass ionomer cement. Angle Orthod 75(2):254–259PubMed
28.
Zurück zum Zitat Guzman UA, Jerrold L, Vig PS, Abdelkarim A (2013) Comparison of shear bond strength and adhesive remnant index between precoated and conventionally bonded orthodontic brackets. Prog Orthod 14:39PubMedCrossRef Guzman UA, Jerrold L, Vig PS, Abdelkarim A (2013) Comparison of shear bond strength and adhesive remnant index between precoated and conventionally bonded orthodontic brackets. Prog Orthod 14:39PubMedCrossRef
29.
Zurück zum Zitat Santos Pinto A, Santos Pinto L, Simplício H, Bonifácio KC, Nunes VM (2001) Remoção de resina residual do esmalte dentário após a descolagem de acessórios ortodônticos: avaliação de duas técnicas. Ortodon Gaúch 5(1):42–48 Santos Pinto A, Santos Pinto L, Simplício H, Bonifácio KC, Nunes VM (2001) Remoção de resina residual do esmalte dentário após a descolagem de acessórios ortodônticos: avaliação de duas técnicas. Ortodon Gaúch 5(1):42–48
30.
Zurück zum Zitat Oliver RG (1988) The effect of different methods of bracket removal on the amount of residual adhesive. Am J Orthod Dentofac Orthop 93(3):196–200CrossRef Oliver RG (1988) The effect of different methods of bracket removal on the amount of residual adhesive. Am J Orthod Dentofac Orthop 93(3):196–200CrossRef
31.
Zurück zum Zitat Rouleau Junior BD, Marshall Junior GW, Cooley RO (1982) Enamel surface evaluations after clinical treatment and removal of orthodontic brackets. Am J Orthod 81(5):423–426CrossRef Rouleau Junior BD, Marshall Junior GW, Cooley RO (1982) Enamel surface evaluations after clinical treatment and removal of orthodontic brackets. Am J Orthod 81(5):423–426CrossRef
32.
Zurück zum Zitat Retief DH, Denys FR (1979) Finishing of enamel surface after debonding of orthodontic attachments. Angle Orthod 49(1):1–10PubMed Retief DH, Denys FR (1979) Finishing of enamel surface after debonding of orthodontic attachments. Angle Orthod 49(1):1–10PubMed
33.
Zurück zum Zitat Campbell PM (1995) Enamel surfaces after orthodontic bracket debonding. Angle Orthod 65(2):103–110PubMed Campbell PM (1995) Enamel surfaces after orthodontic bracket debonding. Angle Orthod 65(2):103–110PubMed
34.
Zurück zum Zitat Howell S, Weekes WT (1990) An electron microscopic evaluation of the enamel surface subsequent to various debonding procedures. Aust Dent J 35(3):245–252PubMedCrossRef Howell S, Weekes WT (1990) An electron microscopic evaluation of the enamel surface subsequent to various debonding procedures. Aust Dent J 35(3):245–252PubMedCrossRef
35.
Zurück zum Zitat Burapavong V, Marshall GW, Apfel DA, Perry HT (1978) Enamel surface characteristics on removal of bonded orthodontic brackets. Am J Orthod 74(2):176–187PubMedCrossRef Burapavong V, Marshall GW, Apfel DA, Perry HT (1978) Enamel surface characteristics on removal of bonded orthodontic brackets. Am J Orthod 74(2):176–187PubMedCrossRef
Metadaten
Titel
Qualitative and quantitative evaluation of human dental enamel after bracket debonding: a noncontact three-dimensional optical profilometry analysis
verfasst von
Fabiano G. Ferreira
Darcy F. Nouer
Nelson P. Silva
Ivana U. Garbui
Lourenço Correr-Sobrinho
Paulo R. A. Nouer
Publikationsdatum
01.09.2014
Verlag
Springer Berlin Heidelberg
Erschienen in
Clinical Oral Investigations / Ausgabe 7/2014
Print ISSN: 1432-6981
Elektronische ISSN: 1436-3771
DOI
https://doi.org/10.1007/s00784-013-1159-0

Weitere Artikel der Ausgabe 7/2014

Clinical Oral Investigations 7/2014 Zur Ausgabe

Newsletter

Bestellen Sie unseren kostenlosen Newsletter Update Zahnmedizin und bleiben Sie gut informiert – ganz bequem per eMail.