Elsevier

Food and Chemical Toxicology

Volume 34, Issues 11–12, November–December 1996, Pages 1163-1165
Food and Chemical Toxicology

Development of a priority list of chemical mixtures occurring at 1188 hazardous waste sites, using the hazdat database

https://doi.org/10.1016/S0278-6915(97)00090-2Get rights and content

Abstract

Under the Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (CERCLA or Superfund) section 104 mandate, as amended by the Superfund Amendments and Reauthorization Act (SARA) of 1986 USC 9604 (i)(2), the Agency for Toxic Substances and Disease Registry (ATSDR) is to identify individual substances and combinations of substances that pose the greatest public health hazard at hazardous waste sites. This has led to certain mandated activities of the Agency, including development of toxicological profiles, identification of data gaps, and, ultimately, establishment of a research agenda. The Agency has also developed HazDat, a database that captures pertinent information from public health assessments conducted at hazardous waste sites. As a preliminary step, data from sites have been analysed to identify the combinations of chemicals found in various environmental media. The most frequently found combinations were perchloroethylene (PERC) and trichloroethylene (TCE) in water (23.5% of sites); chromium (Cr) and lead (Ph) in soil (20.5%); benzene and toluene in air (3.5%); PERC, 1,1,1-trichloroethane (1,1,1-TCA) and TCE in water (11.6%); Cr, cadmium (Cd) and Pb in soil (12.0%); and benzene, PERC and TCE in air (2.2%). The findings of this analysis can be enhanced by factoring into the algorithm paramenters such as toxicity, source contribution, and likelihood of human exposure similar to that used for the Agency's priority list of 275 single substances. Assessment of the impact of chemical mixtures on human health is a formidable task, and estimating the toxicity of such mixtures, including the role of chemical interactions, is an equally demanding challenge. Because limited experimental data exist for chemical interactions, alternative methods such as predictive approaches and in vitro techniques are needed to address the many substances and their potential combinations.

References (11)

There are more references available in the full text version of this article.

Cited by (130)

  • Environmental toxicology: hazardous waste

    2020, Information Resources in Toxicology, Volume 1: Background, Resources, and Tools
  • Hydraulic conductivity and porosity heterogeneity controls on environmental performance metrics: Implications in probabilistic risk analysis

    2019, Advances in Water Resources
    Citation Excerpt :

    Fig. 2 illustrates a sketch of the problem under investigation. Following the work of Henri et al. (2015), the aquifer is contaminated by tetrachloroethylene (PCE), a DNAPL product often identified in groundwater (Fay and Mumtaz, 1996). We assume that PCE is entrapped in the source area and slowly dissolves in time, originating a long-term contamination that moves downgradient.

  • Rich growth medium promotes an increased on Mn(II) removal and manganese oxide production by Serratia marcescens strains isolates from wastewater

    2018, Biochemical Engineering Journal
    Citation Excerpt :

    The increase in mining and industrial activities has elevated its concentration in the environment, leading to problems for not only the environment but also human health owing to its high toxicity [2–4]. Mn has been placed on the Priority List of Hazardous Substances by the Agency for Toxic Substances and Disease Registry (ATSDR) [5] and its contamination in industrial waters, drinking water, and groundwater has become a growing problem in many parts of the world [6], necessitating its removal from these environments. Among the available techniques for Mn removal, physicochemical methods are the most conventional.

  • Preconcentrations of Ni(II) and Co(II) by using immobilized thermophilic Geobacillus stearothermophilus SO-20 before ICP-OES determinations

    2018, Food Chemistry
    Citation Excerpt :

    They are cumulative poisons and are toxic even at low concentration (Ahmad et al., 2015; Hu, 2000). U.S. Agency for Toxic Substances and Disease Registry (ATSDR), lists lead (Pb), mercury (Hg), arsenic (As), and cadmium (Cd) as the most harmful metals according to their prevalence in the toxic waste sites and their toxicity severity (Fay & Mumtaz, 1996; Hu, 2005). The other toxic metals that are potentially dangerous for human health are nickel (Ni), cobalt (Co), copper (Cu), manganese (Mn), and chromium (Cr) (Martin, 2006; Nelson & Cox, 2000).

View all citing articles on Scopus

Presented in part at the Society of Toxicology Annual Meeting, 5–9 March 1995, Baltimore, MD, USA.

View full text