New concept of traction force applied to biliary self-expandable metallic stents

 

 Buy Article Permissions and Reprints

Background and study aims: Various mechanical properties of self-expandable metallic stents (SEMSs) have been reported. They can be classified into the device behavior during and after deployment. While there have been several reports on the latter, information on the former is insufficient. During deployment, the position is maintained by retracting the delivery catheter. We propose that this pulling force be called the traction force and that the magnitude of traction force is termed the traction momentum. The aim of this study was to measure these parameters in order to clarify the properties of SEMSs in terms of their deployment.

Material and methods: The traction force, traction momentum, and shortening rate of 10 different SEMSs were measured. Traction force was measured using in-house equipment, and the shortening rate was determined by measuring the stents.

Results: The shortening rate was closely related to the stent structure. The traction force varied between 1.5 N and 9.4 N, and the traction momentum was significantly elevated in covered and braided stents. A high traction force did not imply a high traction momentum.

Conclusions: A low or constant traction force and a minimal shortening rate significantly facilitated SEMS deployment to optimal positions. Traction force could be an important element for new ideal SEMS design.

• References

• 1 Andersen JR, Sorensen SM, Kruse A et al. Randomised trial of endoscopic endoprosthesis versus operative bypass in malignant obstructive jaundice. Gut 1989; 30: 1132-1135
  CrossrefPubMedGoogle Scholar
• 2 Ferlitsch A, Oesterreicher C, Dumonceau JM et al. Diamond stents for palliation of malignant bile duct obstruction: a prospective multicenter evaluation. Endoscopy 2001; 33: 645-650
  Article in Thieme ConnectPubMedGoogle Scholar
• 3 Shimizu S, Naitoh I, Nakazawa T et al. Feasibility of one-step endoscopic metal stenting for distal malignant biliary obstruction. J Hepatobiliary Pancreat Sci 2014; 21: 219-225
  CrossrefPubMedGoogle Scholar
• 4 Naitoh I, Nakazawa T, Ban T et al. 8-mm versus 10-mm diameter self-expandable metallic stent in bilateral endoscopic stent-in-stent deployment for malignant hilar biliary obstruction. J Hepatobiliary Pancreat Sci 2015; 22: 396-401
  CrossrefPubMedGoogle Scholar
• 5 Davids PH, Groen AK, Rauws EA et al. Randomised trial of self-expanding metal stents versus polyethylene stents for distal malignant biliary obstruction. Lancet 1992; 340: 1488-1492
  CrossrefPubMedGoogle Scholar
• 6 Wagner HJ, Knyrim K, Vakil N et al. Plastic endoprostheses versus metal stents in the palliative treatment of malignant hilar biliary obstruction. A prospective and randomized trial. Endoscopy 1993; 25: 213-218
  Article in Thieme ConnectPubMedGoogle Scholar
• 7 Hori Y, Naitoh I, Ban T et al. Stent under-expansion on the procedure day, a predictive factor for poor oral intake after metallic stenting for gastric outlet obstruction. J Gastroenterol Hepatol 2015; 30: 1246-1251
  CrossrefPubMedGoogle Scholar
• 8 Hayashi K, Okayama Y, Ueno K et al. [Clinical evaluation of covered self-expandable metallic stent for unresectable malignant stomach pyloric region and duodenal obstruction]. Nihon Shokakibyo Gakkai Zasshi 2006; 103: 405-414
  PubMedGoogle Scholar
• 9 Hori Y, Naitoh I, Nakazawa T et al. Feasibility of endoscopic retrograde cholangiopancreatography-related procedures in hemodialysis patients. J Gastroenterol Hepatol 2014; 29: 648-652
  CrossrefPubMedGoogle Scholar
• 10 Stoeckel D, Pelton A, Duerig T. Self-expanding nitinol stents: material and design considerations. Eur Radiol 2004; 14: 292-301
  CrossrefPubMedGoogle Scholar
• 11 Jedwab MR, Clerc CO. A study of the geometrical and mechanical properties of a self-expanding metallic stent – theory and experiment. J Appl Biomater 1993; 4: 77-85
  CrossrefPubMedGoogle Scholar
• 12 Dyet JF, Watts WG, Ettles DF et al. Mechanical properties of metallic stents: how do these properties influence the choice of stent for specific lesions?. Cardiovasc Intervent Radiol 2000; 23: 47-54
  CrossrefPubMedGoogle Scholar
• 13 Isayama H, Nakai Y, Toyokawa Y et al. Measurement of radial and axial forces of biliary self-expandable metallic stents. Gastrointest Endosc 2009; 70: 37-44
  CrossrefPubMedGoogle Scholar
• 14 Dumonceau JM, Heresbach D, Deviere J et al. Biliary stents: models and methods for endoscopic stenting. Endoscopy 2011; 43: 617-626
  Article in Thieme ConnectPubMedGoogle Scholar
• 15 Dumonceau JM, Tringali A, Blero D et al. Biliary stenting: indications, choice of stents and results: European Society of Gastrointestinal Endoscopy (ESGE) clinical guideline. Endoscopy 2012; 44: 277-298
  Article in Thieme ConnectPubMedGoogle Scholar