Skip to main content
Advertisement
  • Loading metrics

Loop-Mediated Isothermal Amplification (LAMP) Method for Rapid Detection of Trypanosoma brucei rhodesiense

  • Zablon Kithinji Njiru ,

    z.njiru@murdoch.edu.au or zknjiru@hotmail.com

    Affiliations School of Nursing, Murdoch University, Mandurah, Western Australia, Australia, Trypanosomiasis Research Centre, Kenya Agricultural Research Institute, Kikuyu, Kenya

  • Andrew Stanislaw John Mikosza,

    Affiliation WHO Collaborating Centre for the Molecular Epidemiology of Parasitic Infections, School of Veterinary and Biomedical Sciences, Murdoch University, Murdoch, Western Australia, Australia

  • Tanya Armstrong,

    Affiliation WHO Collaborating Centre for the Molecular Epidemiology of Parasitic Infections, School of Veterinary and Biomedical Sciences, Murdoch University, Murdoch, Western Australia, Australia

  • John Charles Enyaru,

    Affiliation Department of Biochemistry, Faculty of Science, Makerere University, Kampala, Uganda

  • Joseph Mathu Ndung'u,

    Affiliation Foundation for Innovative New Diagnostics (FIND), Cointrin, Switzerland

  • Andrew Richard Christopher Thompson

    Affiliation WHO Collaborating Centre for the Molecular Epidemiology of Parasitic Infections, School of Veterinary and Biomedical Sciences, Murdoch University, Murdoch, Western Australia, Australia

Abstract

Loop-mediated isothermal amplification (LAMP) of DNA is a novel technique that rapidly amplifies target DNA under isothermal conditions. In the present study, a LAMP test was designed from the serum resistance-associated (SRA) gene of Trypanosoma brucei rhodesiense, the cause of the acute form of African sleeping sickness, and used to detect parasite DNA from processed and heat-treated infected blood samples. The SRA gene is specific to T. b. rhodesiense and has been shown to confer resistance to lysis by normal human serum. The assay was performed at 62°C for 1 h, using six primers that recognised eight targets. The template was varying concentrations of trypanosome DNA and supernatant from heat-treated infected blood samples. The resulting amplicons were detected using SYTO-9 fluorescence dye in a real-time thermocycler, visual observation after the addition of SYBR Green I, and gel electrophoresis. DNA amplification was detected within 35 min. The SRA LAMP test had an unequivocal detection limit of one pg of purified DNA (equivalent to 10 trypanosomes/ml) and 0.1 pg (1 trypanosome/ml) using heat-treated buffy coat, while the detection limit for conventional SRA PCR was ∼1,000 trypanosomes/ml. The expected LAMP amplicon was confirmed through restriction enzyme RsaI digestion, identical melt curves, and sequence analysis. The reproducibility of the SRA LAMP assay using water bath and heat-processed template, and the ease in results readout show great potential for the diagnosis of T. b. rhodesiense in endemic regions.

Author Summary

Control of human African trypanosomiasis (HAT) or sleeping sickness relies on diagnosis and treatment of infected patients. However, the diagnostic tests in routine use have limited sensitivity, due to a characteristically low parasitaemia in infected individuals. Differentiation of infections by Trypanosoma brucei rhodesiense (causes acute disease) and T. b. gambiense (causes chronic disease) is essential, as the two forms of disease have different treatment regimens. In the present work, loop-mediated isothermal amplification (LAMP) of DNA was successfully used to detect T. b. rhodesiense, with a sensitivity of up to one trypanosome/ml of blood. The LAMP test was efficient and robust, and results were obtained within 35 min. Amplification was possible when a water bath was used to maintain the temperature at isothermal conditions (60–65°C), and results could be read by visual observation of colour change. These findings have increased the prospects for developing a simple molecular test for HAT that can be used with limited equipment at point of care in endemic rural areas.

Introduction

Human African trypanosomiasis is endemic in tropical Africa. In eastern and southern Africa the disease is caused by Trypanosoma brucei rhodesiense, while T. b. gambiense infections are common in central and West Africa. T. b. rhodesiense causes an acute form of disease, whereas T. b. gambiense causes a more chronic form. Moreover, the treatment regimen for the two infections is different, expressing the need for a specific diagnostic test for each trypanosome. The geographical demarcation of T. b. rhodesiense and T. b. gambiense to a large extent forms the basis of trypanosome identification and treatment. In East Africa the introduction of T. b. rhodesiense into the T. b. gambiense region is certain to occur due to the closeness of the two disease foci and continuous movement of the livestock-reservoir host for T. b. rhodesiense. This prospect further obligates the development of test kits that can differentiate the two parasites. The serum resistance-associated (SRA) gene [1],[2] is conserved and specific to T. b. rhodesiense [3][5] and therefore provides unequivocal identification of this parasite. It is a low-copy gene, therefore the polymerase chain reaction (PCR) test is inadequate to amplify this target reliably in clinical samples without recourse to parasite multiplication in mice. Besides, available molecular methods of parasite detection require elaborate precision instruments [3][7], which make their use under field conditions unfeasible. There is therefore a need for a simplified method of amplification and product detection that would compliment the available tests and make feasible molecular diagnosis for case detection and confirmation of cure in the regions that are endemic for sleeping sickness.

Recently, a technique called loop-mediated isothermal amplification (LAMP) of DNA has been developed [8]. The technique uses four to six primers that recognise six to eight regions of the target DNA, respectively, in conjunction with the enzyme Bst polymerase, which has strand displacement activity. The simultaneous initiation of DNA synthesis by multiple primers makes the technique highly specific. The LAMP test is carried out under isothermal conditions (60–65°C) and produces large amount of DNA [8]. The reaction shows high tolerance to biological products [9], meaning that DNA extraction may not be necessary [10], and the product can be inspected visually by the addition of SYBR Green I [11],[12]. Briefly, LAMP proceeds when the forward inner primer (FIP) anneals to the complementary region (F2c) in the target DNA and initiates the first strand synthesis, and then the outer forward primer (F3) hybridises and displaces the first strand, forming a loop structure at one end [8]. This single-stranded DNA serves as template for backward inner primer (BIP)-initiated DNA synthesis and subsequent outer backward (B3)-primed strand displacement DNA synthesis, leading to the formation of dumbbell-shaped DNA structures [8]. The stem-loop thus formed acts as a template, and subsequently one inner primer hybridises to the loop on the product and initiates the displacement DNA synthesis, forming the original stem loop and a new stem loop that is twice as long [13]. The final products are stem-loop DNAs with several inverted repeats of the target DNA, and cauliflower-like structures bearing multiple loops [8].

A number of LAMP tests to detect parasitic protozoa have been designed and used successfully [14][16]. The rapidity, specificity, and simplicity of the technique make it appealing for use in trypanosomiasis-endemic regions. The purpose of the present study was to develop a LAMP test for detection of T. b. rhodesiense based on the SRA gene and compare it with PCR test that is specific for T. b. rhodesiense. Our results indicate that the SRA LAMP is sensitive and specific and has the potential to be developed into a field-friendly diagnostic test.

Materials and Methods

Ethical clearance

Institutional Ethical Clearance for the collection of human samples had been obtained from the Livestock Health Research Institute (LIRI), Tororo, Uganda, and the Uganda National Council of Science and Technology (UNCST), Kampala, Uganda, which records and regulates all research activities in the country. At Murdoch University, Perth, Australia, the use of mice was approved by Murdoch University Animal Ethics Committee (AEC).

Preparation of template

The trypanosome DNA samples used in this study are shown in Table 1. The samples which most had been passaged in mice were chosen to ensure a wide geographical representation, different times of isolation, and hosts (Table 1). Six samples designated as JE (three each from blood and cerebrospinal fluid [CSF]) were direct isolates from human hosts. The DNA had been prepared using several methods (see footnotes in Table 1). The samples for studying analytical sensitivity and tolerance of LAMP were obtained from the blood of mice infected with T. b. rhodesiense and divided into two portions. The first portion was centrifuged at 3,000 rpm for 10 min and the buffy coat was collected, and the second portion was divided into aliquots of 10 µl. Then each of the two portions was mixed with 40 µl of ultrapure water, boiled for 3 min, and centrifuged at 14,000 g for 5 min. Samples of 10–15 µl of supernatant were recovered and stored at −20°C for later use.

Polymerase chain reaction

Trypanosomes belonging to the subgenus Trypanozoon were analysed using TBR1 and 2 primers [7]. Furthermore T. b. rhodesiense was detected by a PCR specific for the SRA gene [3]), whereas T. b. gambiense was detected using a PCR for the T. b. gambiense-specific glycoprotein (TgsGP) gene [17].

LAMP reaction

LAMP reactions of 25 µl were standardised for optimal reagent concentrations, temperature, and time conditions using T. b. rhodesiense isolate LVH 56 and following the Taguchi design [18]. Briefly, the FIP and BIP were varied from 0.8 µM to 2.4 µM, dNTPs from 100 µM to 400 µM, betaine from 0.2 M to 0.8 M, and MgSO4 from 0 to 4 mM. The FIP, BIP, F3, and B3 primers were designed using the PrimerExplorer v3 software (http:/primerexplorer.jp/lamp) based on the SRA gene sequence (GenBank accession number Z37159) (Table 2). Loop primers [loop forward (LF) and loop backward (LB)] were designed manually. The reactions were optimised at 2.0 µM for FIP and BIP primers, 0.8 µM for loop primer (LF and LB), 0.2 µM for F3 and B3 outer primers, 200 µM for each dNTP, 0.8 M betaine (Sigma), 20 mM Tris-HCl (pH 8.8), 10 mM KCl, 10 mM (NH4)2SO4, 2 mM MgSO4, 0.1% Triton X-100, and 8 U of Bst DNA polymerase large fragment (New England Biolabs). For real-time reactions 3.34 µM SYTO-9 fluorescence dye (Molecular Probes) was added. The template was ∼100 pg for trypanosome lysate DNA samples and 2 µl of buffy coat and supernatant prepared from boiled blood. To find the optimum temperature for the LAMP test, the reactions were carried out for 1 h at 58, 60, 62, and 64°C using the Rotor-Gene 3000 thermocycler (Corbett Research) or in a water bath at the same temperature settings. The reaction was terminated by increasing the temperature to 80°C for 4 min.

Detection of LAMP product

Three methods were used to analyse DNA amplification, and included electrophoresis in 1.5% agarose gels stained with ethidium bromide, direct visual inspection of the LAMP product after addition of 1 µl of 1/10 dilution of SYBR Green I (Invitrogen), and by monitoring fluorescence of the double-stranded DNA (dsDNA)-specific dye SYTO-9 [19] in a Rotor-Gene 3000 thermocycler. Real-time fluorescence data was obtained on the FAM channel (excitation at 470 nm and detection at 510 nm) [19]. Three approaches were used to confirm that the SRA LAMP test amplified the correct target: (1) the product was digested with restriction enzyme RsaI (New England Biolabs) at 37°C for 3 h, followed by electrophoresis in 3% agarose gel; (2) following amplification, the DNA melting curves were acquired on the FAM channel using 1°C steps, with a hold of 30 s, from 62 to 96°C [19]; and (3) some of the LAMP amplicon bands were excised from an agarose gel and cloned into a TOPO-TA vector (Invitrogen), transformed in E. coli and inserts sequenced using an automated DNA 3730 analyser (Applied Biosystems). The resulting sequences were aligned with the target sequence using the DNAman computer software version 5.0 (Lynnon Biosoft).

Sensitivity and specificity of LAMP

10-fold dilutions were made from infected mouse blood containing 1.0×106 trypanosomes/ml and from 100 ng of purified T. b. rhodesiense DNA, and used to determine the analytical sensitivity of SRA LAMP and PCR tests. The reactions were done in triplicates and repeated after 2 wks. The LAMP test was carried out using both cold and heated templates. The specificity of the tests were assessed with DNA from human, tsetse fly, bovine, Plasmodium falciparum, and trypanosomes belonging to other species (Trypanosoma brucei brucei, T. b. gambiense, T. b. evansi, Trypanosoma congolense savannah, T. c. kilifi, T. c. forest, Trypanosoma simiae, T. s. tsavo, Trypanosoma godfreyi, Trypanosoma vivax, and Trypanosoma lewisi).

Results

LAMP test

The results of the SRA LAMP assay are shown in Figures 14 and Table 1. When the test was carried out without loop primers a product was detected after 50 min. The inclusion of loop primers reduced the reaction time from an average of 50 min down to between 20 and 25 min and increased the sensitivity 100-fold. The best results were obtained when the reaction temperature was maintained at 62°C. All the positive LAMP reactions produced a characteristic ladder of multiple bands on an agarose gel (Figure 1A and 1B), indicating that stem-loop DNA with inverted repeats of the target sequence was produced. Positive reactions turned green on addition of SYBR Green I, while the negative ones remained orange (Figure 3). RsaI restriction enzyme digestion and electrophoresis gave the predicted sizes of 90 bp and 114 bp (Figure 1B). The SRA LAMP amplicons showed reproducible melt curves with a Tm of ∼87.5°C, suggesting amplicons of the same sequence (Figure 4). The cloned sequence showed 100% identity with the target sequence, and revealed that the length varied with sequence repeats of primers and there complementary sequences. The analytical sensitivity of SRA LAMP assay improved from a dilution of 10−4 to 10−6 when a template (DNA or supernatant) was preheated before being added to a reaction (Figure 2), with the best detection limit of dilution 10−7 recorded with supernatant prepared from the buffy coat. The classical PCR based on the same gene [3] showed a detection limit of dilution 10−4. The SRA LAMP detected all the 49 (100%) T. b. rhodesiense (including the six samples isolated directly from HAT patients), while TBR1 and 2 primers detected 39 out of 46 (84.8%) and SRA PCR detected 31 out of 46 (67.4%) samples (Table 1). The SRA LAMP test was specific and no cross-reaction was recorded with nontarget DNA.

thumbnail
Figure 1. Analytical Sensitivity of SRA LAMP and Restriction Enzyme Digestion Results.

(A) Sensitivity of the SRA LAMP assay using DNA lysate from T. b. rhodesiense isolate LVH 56. Sensitivity results for 10-fold dilutions from infected mouse blood showed identical results. The lysate/supernatant was heated at 96°C for 1 min before being added to the reaction mixture. The reactions which were done in triplicates showed detection limit of ≈1 pg an equivalent of dilution 10−5. M, 100 bp marker, TMRS 127, T. b. rhodesiense, neat (100 ng), 10−1 (10 ng), 10−2 (1 ng), 10−3 (100 pg), 10−4 (10 pg), 10−5 (1 pg), 10−6 (100 fg), 10−7 (10 fg), and NC, negative control. The detection limit for SRA PCR was 10−2 (100 pg≈1,000 trypanosomes/ml). (B) Electrophoresis results for isolates TMRS 127 (lane 1) and LVH 56 (lane 3), and their RsaI restriction enzyme digests (lane 2 for TMRS 127 and lane 4 for LVH 56). M, 100 bp marker.

https://doi.org/10.1371/journal.pntd.0000147.g001

thumbnail
Figure 2. Comparison of the Sensitivity of SRA LAMP Under Different Conditions.

Sensitivity was compared using preheated and cold template for T. b. rhodesiense isolate LVH 56 (1 and 3) and 058 (2 and 4), respectively, and as monitored using the Rotor-Gene 3000 thermocycler. Preheating of the template accelerates the detection of a positive reaction by approximately 12 min.

https://doi.org/10.1371/journal.pntd.0000147.g002

thumbnail
Figure 3. Visual Appearance of Postassay SRA LAMP Reactions from Isolates after the Addition of 1 µl of 1/10 Dilution of SYBR Green I.

Positive samples produce a green colour almost immediately (tubes 1, 2, and 3 containing 100 pg of T. b. rhodesiense DNA) while negatives remain orange (tube 4 and NC, negative control).

https://doi.org/10.1371/journal.pntd.0000147.g003

thumbnail
Figure 4. Melting Curves for T. b. rhodesiense SRA LAMP Product as Monitored in Rotor-Gene 3000.

The curves were obtained after LAMP amplification for 35 min and detected on the FAM channel using 1°C steps, and a hold of 30 sec, at each step from 60 to 96°C. All isolates had a melting temperature (Tm) of ∼87.5°C indicating similar sequences, and hence similar amplicon.

https://doi.org/10.1371/journal.pntd.0000147.g004

Discussion

In the present study we were able to demonstrate the successful amplification of T. b. rhodesiense DNA within 20–25 min at 62°C using the SRA LAMP assay. However, we set the optimal time at 35 min to amplify DNA at low concentrations. The results of the SRA LAMP assay were identical when either a water bath or a thermocycler was used to maintain the temperature at 62°C, demonstrating its robustness. Preheating of the template increased the efficiency of the assay by shortening the duration (Figure 2) and increasing sensitivity of the test. DNA amplification is preceded by strand separation under isothermal conditions using betaine, which destabilises the DNA helix [8]. It would appear that preheating of the sample produced a faster and/or a greater amount of strand separation, which translated into a far more rapid assay. All positive samples detected by gel electrophoresis or in real-time using SYTO-9 fluorescence dye could also be detected visually by addition of SYBR Green I to the product. This ability highlights another advantage of LAMP technique: the results of amplification can visually be observed through addition of a DNA intercalating dye (Figure 3), eliminating the need for gel electrophoresis and greatly reducing the time taken for result analysis.

When pure trypanosome DNA was used, the detection limit of the SRA LAMP test without loop primers was an equivalent of 1,000 trypanosomes/ml. This limit was improved to an equivalent of one trypanosome/ml with the inclusion of loop primers. Increased sensitivity and reduction in LAMP reaction time with the addition of loop primers is well documented [20] and has been demonstrated in detection of Mycobacterium [11], periodontal pathogens [12], and Plasmodium falciparum malaria [10]. Loop primers accelerate the LAMP reaction by hybridising to the stem-loop region, initiating further DNA amplification [20]. When different templates were used, heat-treated buffy coat from mice blood performed better than the supernatant obtained after boiling blood samples. The higher sensitivity recorded could be the effect of concentrating the parasites in the buffy coat through centrifugation; therefore, buffy coat seems a superior template for SRA LAMP test.

The robustness of the LAMP test is demonstrated by the ability to amplify target DNA from various templates without the expensive and time-consuming process of DNA purification. We observed no inhibitory effects in using 2–5 µl of supernatant in a 25 µl reaction or an increase in sensitivity beyond 2 µl, indicating that this volume was the optimal for our samples. The possibility of using heat-processed samples without compromising sensitivity eliminates the need for DNA extraction and further shortens the LAMP reaction. Other studies have shown superior tolerance of LAMP tests for biological substances [9],[13] and heat processed blood has been used successfully in detection Malaria [10]. The method of template preparation for use in LAMP tests, however, needs to be further developed.

The potential usefulness of SRA LAMP is confirmed by its ability to detect T. b. rhodesiense directly from parasitaemic and apparently aparasitaemic clinical samples (human blood and CSF). The human blood (JE2 and JE3) and CSF samples JE8–JE10 used in the present study were negative by microscopy at the time of sampling. Parasites were demonstrated only following inoculation of the samples in mice. When the samples were tested, they were positive by SRA LAMP assay while only JE4, JE9, and JE10 were positive using TBR PCR (Table 1) [7]. Detection of aparasitaemic samples demonstrates one of the practical values of SRA LAMP in sleeping sickness diagnosis-time-consuming parasite multiplication assays in mice are unnecessary, and early diagnosis increases the chances of cure after treatment.

In the present study, amplification of the target sequence was confirmed by restriction enzyme digestion using RsaI, melting curve analysis, and sequence analysis. It is important to distinguish T b. rhodesiense and T. b. gambiense since the two parasitic infections have different treatments. In recent years the T. b. rhodesiense region in Southern Uganda has been expanding towards the T. b. gambiense focus as a result of livestock movement [21],[22]. There is therefore a need to continue development of rapid and sensitive techniques to differentiate the two parasites and to compliment the available PCR tests, and to this end the SRA LAMP assay has shown great potential for this application.

The LAMP test should theoretically not amplify nontarget sequences, since the specificity is enhanced by using a set of six primers. However there is a high risk of amplicon contamination since the tubes have to be opened to add the dye. Analysis of any false positive reactions through sequencing and restriction enzyme analysis would easily distinguish between false positive and contamination. To reduce the chances of contamination, similar protocols to those followed for PCR are required. However, the great potential for LAMP is that reactions can be performed and results read without opening tubes [23]. On this end, more work is needed to develop such a closed reaction system for diagnosing sleeping sickness.

This study has shown that the SRA LAMP assay could be developed into an assay for T. b. rhodesiense that is simple to use at point of care. The detection of the equivalent of one trypanosome/ml in the buffy coat (with the possibility of reducing this further to 0.1 trypanosomes/ml) compares well with the normal parasitaemia in humans. Since DNA amplification and reading of results require minimum equipment, the technique has great potential for use in the HAT-endemic countries as back-up test for other HAT tests currently in use.

Acknowledgments

The authors acknowledge the provision of samples from Wendy Gibson (University of Bristol, UK), Johnson Ouma (Trypanosomiasis Research Centre, KARI, Kenya), Philippe Büscher (Institute of Tropical Medicine, Belgium), Enock Matovu (Makerere University, Uganda), and Stafford Kibona (National Institute of Medical Research, Tabora, Tanzania).

Author Contributions

Conceived and designed the experiments: AT ZN. Performed the experiments: ZN TA AM JE. Analyzed the data: AT ZN JN TA AM JE. Contributed reagents/materials/analysis tools: AT JN AM. Wrote the paper: ZN JN.

References

  1. 1. De Greef C, Imberechts H, Matthyssons G, Van Meirvenne N, Hamers R (1989) A gene only expressed in serum resistant variants of Trypanosoma brucei rhodesiense. Mol Biochem Parasitol 36: 169–176.
  2. 2. De Greef C, Hamers R (1994) The serum resistance associated (SRA) gene of Trypanosoma brucei rhodesiense encodes a VSG-like protein. Mol Biochem Parasitol 68: 277–284.
  3. 3. Gibson W, Backhouse T, Griffiths A (2002) The human serum resistance associated gene is ubiquitous and conserved in Trypanosoma brucei rhodesiense throughout East Africa. Infect Genet Evol 25: 1–8.
  4. 4. Welburn SC, Picozzi K, Fevre EM, Coleman PG, Odiit M, et al. (2001) Identification of human-infective trypanosomes in animal reservoir of sleeping sickness in Uganda by means of serum-resistance-associated (SRA) gene. Lancet 358: 2017–2019.
  5. 5. Njiru ZK, Ndung'u K, Matete G, Ndung'u JM, Gibson WC (2004) Detection of Trypanosoma brucei rhodesiense in animals from sleeping sickness foci in East Africa using the serum resistance associated (SRA) gene. Acta Tropica 90: 249–254.
  6. 6. Truc P, Mathieu-Daudé F, Tibayrec M (1991) Multilocus isoenzyme identification of Trypanosoma brucei stocks isolated in central Africa: evidence for an animal reservoir of sleeping sickness in Congo. Acta Tropica 49: 127–135.
  7. 7. Masiga DK, Smyth AJ, Hayes P, Bromidge TJ, Gibson WC (1992) Sensitive detection of trypanosomes in tsetse flies by DNA amplification. Int J Parasitol 22: 909–918.
  8. 8. Notomi T, Okayama H, Masubuchi H, Yonekawa T, Watanabe , et al. (2000) Loop-mediated isothermal amplification of DNA. Nucleic Acids Res 28(12): E63.
  9. 9. Kaneko H, Kawana T, Fukushima E, Suzutani T (2007) Tolerance of loop-mediated isothermal amplification to a culture medium and biological substances. J Biochem Biophys Methods 70: 499–501.
  10. 10. Poon LL, Wong BW, Ma EH, Chan KH, Chow LM, et al. (2006) Sensitive and inexpensive molecular test for falciparum malaria: detecting Plasmodium falciparum DNA directly from heat-treated blood by loop-mediated isothermal amplification. Clin Chem 52: 303–306.
  11. 11. Iwamoto T, Sonobe T, Hayashi K (2003) Loop-mediated amplification for direct detection of Mycobacterium tuberculosis, M. avium and M. intracellulare in sputum samples. J Clin Microbiol 41: 2616–2622.
  12. 12. Yoshida A, Nagashima S, Ansai T, Tachibana M, Kato H, et al. (2005) Loop-mediated Isothermal Amplification method for rapid detection of the periondontopathic bacteria Porphyromona gingivalis, Tannerella forsythia and Treponema denticola. J Clin Microbiol 43: 2418–2424.
  13. 13. Yamada Y, Itoh M, Yoshida M (2006) Sensitive and rapid diagnosis of human parvovirus B19 infection by Loop-Mediated Isothermal Amplification. Br J Dermatol 155: 50–55.
  14. 14. Ikadai H, Tanaka H, Shibahara N, Matsuu A, Uechi M, Itoh N, Oshiro S, Kudo N, Igarashi I, Oyamada T (2004) Molecular evidence of infections with Babesia gibsoni parasites in Japan and evaluation of the diagnostic potential of a loop-mediated isothermal amplification method. J Clinic Microbiol 42: 2465–2469.
  15. 15. Kuboki N, Inoue N, Sakurai T, Di Cello F, Grab DJ, Suzuki H, Sugimoto C, Igarashi I (2003) Loop-mediated isothermal amplification for detection of African trypanosomes. J Clin Microbiol 41: 5517–5524.
  16. 16. Thekisoe OM, Kuboki N, Nambota A, Fujisaki K, Sugimoto C, Igarashi I, Yasuda J, Inoue N (2007) Species-specific loop-mediated isothermal amplification (LAMP) for diagnosis of trypanosomosis. Acta Tropica. 102: 182–189.
  17. 17. Radwanska M, Claes F, Magez S, Magnus E, Perez-Morga D, et al. (2002) Novel primer sequences for polymerase chain reaction-based detection of Trypanosoma brucei gambiense. Am J Trop Med Hyg 67: 289–295.
  18. 18. Cobb B, Clarkson JM (1994) A simple procedure for optimising the polymerase chain reaction (PCR) using modified Taguchi methods. Nucleic Acids Res 22: 3301–3805.
  19. 19. Monis PT, Giglio S, Saint CP (2005) Comparison of SYTO9 and SYBR Green I for real-time polymerase chain and investigation of the effect of dye concentration on amplification and DNA melting curve analysis. Anal Biochem 30: 24–34.
  20. 20. Nagamine K, Hase T, Notomi T (2002) Accelerated reaction by loop-mediated isothermal amplification using loop primers. Mol Cell Probes 16: 223–229.
  21. 21. Fevre EM, Coleman PG, Odiit MD, Magona J, Welburn SC, et al. (2001) The origins of a new sleeping sickness outbreak (caused by Trypanosoma brucei infection) in eastern Uganda. Lancet. 358: 625–628.
  22. 22. Picozzi K, Fevre EM, Odiit M, Carrington M, Eisler MC, et al. (2005) Sleeping sickness in Uganda: a thin line between two fatal diseases. BMJ. 331: 1238–1241.
  23. 23. Boehme CC, Nabeta P, Henastroza G, Rubhana R, Rahim Z, et al. (2007) Operational feasibility of using loop-mediated isothermal amplification (LAMP) for the diagnosis of pulmonary TB in microscopy centres of developing countries. J Clin Microbiol. 45: 1936–1940.