nach oben

Erschienen in:

01.03.2014 | Original Article

Marginal and internal fit of four-unit zirconia fixed dental prostheses based on digital and conventional impression techniques

verfasst von: Júnio S. Almeida e Silva, Kurt Erdelt, Daniel Edelhoff, Élito Araújo, Michael Stimmelmayr, Luiz Clovis Cardoso Vieira, Jan-Frederik Güth

Erschienen in: Clinical Oral Investigations | Ausgabe 2/2014

Einloggen, um Zugang zu erhalten

Abstract

Objectives

The aim of this in vitro study was to evaluate the marginal and internal fit of CAD/CAM-generated four-unit zirconia fixed dental prostheses made with digital and conventional impressions.

Materials and method

A titanium master model was used. For group conventional impression (CI), 12 polyether impressions of the master model with Impregum^TM were made. For group digital impression (DI), 12 digital impressions of the master model using Lava^TM C.O.S. system were made. The replica technique was applied. The Mann–Whitney U statistical test was applied to detect statistical differences between the groups, in terms of marginal and internal fit. Face-by-face comparisons between groups were also carried out.

Results

Groups DI and CI presented mean marginal fit of 63.96 and 65.33 μm, respectively, and showed no statistically significant difference. Groups DI and CI presented significantly different internal fit with mean values of 58.46 and 65.94 μm, respectively. Group DI showed statistically significantly lower values for marginal and internal fit on premolar mesial face, and on molar distal and palatal faces.

Conclusions

Frameworks fabricated from digital and conventional impressions showed clinically acceptable marginal fit. Frameworks fabricated from digital impression demonstrated better internal fit than ones fabricated from conventional impression. Reviewing each retainer face, digital impression showed better marginal and internal fit at the premolar mesial and molar distal faces.

Clinical relevance

The results of this in vitro study show that digital impressions made with the Lava^TM C.O.S. system and its digital workflow are suitable for fabricating four-unit zirconia frameworks, with regard to marginal and internal fit requirements.

Christensen GJ (2008) Will digital impressions eliminate the current problems with conventional impressions? J Am Dent Assoc 139(6):761–763PubMedCrossRef

Cancy JM, Scandrett FR, Ettinger RL (1983) Long-term dimensional stability of three current elastomers. J Oral Rehabil 10(4):325–333CrossRef

Endo T, Finger WJ (2006) Dimensional accuracy of a new polyether impression material. Quintessence Int 37(1):47–51PubMed

Shetty P, Rodrigues S (2006) Accuracy of elastomeric impression materials on repeated pours. J Indian Prosthodont Soc 6(2):68–71CrossRef

Hondrum SO (2001) Changes in properties of non-aqueous elastomeric impression materials after storage of components. J Prosthet Dent 85(1):73–81PubMedCrossRef

Thongthammachat S, Moore BK, Barco MT 2nd, Hovijitra S, Brown DT, Andres CJ (2002) Dimensional accuracy of dental casts: influence of tray material, impression material, and time. J Prosthodont 11(2):98–108PubMedCrossRef

State of the industry (2000) Lab Management Today; 2000; 9–15

Christensen GJ (2005) The state of fixed prosthodontic impressions. Room for improvement. J Am Dent Assoc 136:343–346PubMedCrossRef

Christensen GJ (2007) Laboratories want better impressions. J Am Dent Assoc 138(4):527–529PubMedCrossRef

10.

Christensen GJ (2008) The challenge to conventional impressions. J Am Dent Assoc 139(3):347–349PubMedCrossRef

11.

Touchstone A, Nieting T, Ulmer N (2010) Digital transition: the collaboration between dentists and laboratory technicians on CAD/CAM restorations. J Am Dent Assoc 141(6 suppl):15S–19SPubMedCrossRef

12.

Mehl A, Hickel R (1999) Current state of development and perspectives of machine based production methods for dental restorations. Int J Comput Dent 2(1):9–35PubMed

13.

Beuer F, Schweiger J, Edelhoff D (2008) Digital dentistry: an overview of recent developments for CAD/CAM generated restorations. Br Dent J 204(9):505–511PubMedCrossRef

14.

Al-Bakri IA, Hussey D, Al-Omari WM (2007) The dimensional accuracy of four impression techniques with the use of addition silicone impression materials. J Clin Dent 18(2):29–33PubMed

15.

Beuer F, Naumann M, Gernet W (2009) Precision of fit: zirconia three-unit fixed dental prostheses. Clin Oral Invest 13:343–349CrossRef

16.

Jablonski S (1993) Illustrated dictionary of dentistry, 1982. J Dent 21:265–273CrossRef

17.

Fransson B, Oilo G, Gjeitanger R (1985) The fit of metal-ceramic crowns, a clinical study. Dent Mater 1:197–199PubMedCrossRef

18.

Karlsson S (1993) The fit of Procera titanium crowns. An in vitro and clinical study. Acta Odontol Scand 51:129–134PubMedCrossRef

19.

McLean JW, von Fraunhofer JA (1971) The estimation of cement film thickness by an in vivo technique. Br Dent J 131:107–111PubMedCrossRef

20.

Belser UC, MacEntee MI, Richter WA (1985) Fit of three porcelain-fused-to-metal marginal designs in vivo: a scanning electron microscope study. J Prosthet Dent 53:24–29PubMedCrossRef

21.

Sulaiman F, Chai J, Jameson LM, Wozniak WT (1997) A comparison of the marginal fit of In-Ceram, IPS Empress and Procera crowns. Int J Prosthodont 10:478–484PubMed

22.

Beschinidt SM, Strub JR (1999) Evaluation of the marginal accuracy of different all-ceramic crown systems after simulation in the artificial mouth. J Oral Rehab 26:582–593CrossRef

23.

Janenko C, Smales RJ (1979) Anterior crowns and gingival health. Australi Dent J 24:225–230CrossRef

24.

Bader JD, Rozier RG, McFall WT Jr, Ramsey DL (1991) Effect of crowns margins on periodontal conditions in regularly attending patients. J Prosthet Dent 65:75–79PubMedCrossRef

25.

Kokubo Y, Ohkubo C, Tsumita M, Miyashita A, Vult Von Steyern O, Fukushima S (2005) Clinical marginal and internal gaps of Procera All-Ceram crowns. J Oral Rehab 32:526–530CrossRef

26.

Reich S, Wichmann M, Nkenke E, Proeschel P (2005) Clinical fit of all-ceramic three-unit fixed partial dentures, generated with three different CAD/CAM systems. Eur J Oral Sci 113:174–179PubMedCrossRef

27.

Reich S, Kappe K, Teschner H, Schimitt J (2008) Clinical fit of four-unit zirconia posterior fixed dental prostheses. Eur J Oral Sci 116:579–584PubMedCrossRef

28.

Kohorst P, Brinkmann H, Li J, Borchers L, Stiesch M (2009) Marginal accuracy of four-unit zirconia fixed dental prostheses fabricated using different computer-aided manufacturing systems. Eur J Oral Sci 117:319–325PubMedCrossRef

29.

Rekow D, Thompson VP (2005) Near-surface damage—a persistent problem in crowns obtained by computer-aided design and manufacturing. Proc Inst Mech Eng 219:233–243CrossRef

30.

Lava Chairside Oral Scanner C.O.S (2009) 3M ESPE Technical Datasheet. http://multimedia.3m.com/mws/mediawebserver?mwsId=66666UuZjcFSLXTtnXMVMXfXEVuQEcuZgVs6EVs6E666666. Accessed 10 May 2011

31.

Syrek A, Reich G, Ranftl D, Klein C, Cerny B, Brodesser J (2010) Clinical evaluation of all-ceramic crowns fabricated from digital impressions based on the principle of active wavefront sampling. J Dent 38:553–559PubMedCrossRef

32.

Kunii J, Hotta Y, Tamaki Y, Ozawa A, Kobayashi Y, Fujishima A, Myasaki T, Fujiwara T (2007) Effect of shrinkage on the marginal and internal fit of CAD/CAM-fabricated zirconia frameworks. Dent Mater J 26(6):820–826PubMedCrossRef

33.

Mehl A, Ender A, Mörman W, Attin T (2009) Accuracy testing of a new intraoral 3D camera. Int J Comput Dent 12(1):11–28PubMed

34.

Ender A, Mehl A (2011) Full arch scans: conventional versus digital impressions—an in vitro study. Int J Comput Dent 14(1):11–21PubMed

35.

Quaas S, Rudolph H, Luthardt RG (2007) Direct mechanical data acquisition of dental impressions for the manufacturing of CAD/CAM restorations. J Dent 35(12):903–908PubMedCrossRef

36.

Boening KW, Wolf BH, Schmidt AE, Kästner K, Walter MH (2000) Clinical fit of Procera all-ceram crowns. J Prosthet Dent 84:419–124PubMedCrossRef

37.

Molin M, Karlsson S (1993) The fit of gold inlays and three ceramic inlay systems. A clinical and in vitro study. Acta Odontol Scand 51:201–206PubMedCrossRef

38.

Holmes JR, Bayne SC, Holland GA, Sulik WD (1989) Considerations in measurement of marginal fit. J Prosthet Dent 62:405–408PubMedCrossRef

39.

Tuntiprawon M, Wilson PR (1995) The effect of cement thickness on the fracture strength of all-ceramic crowns. Aust Dent J 40:17–21PubMedCrossRef

40.

Rekow ED, Harsono M, Janal M, Thompsin VP, Zhang G (2006) Factorial analysis of variables influencing stress in all-ceramic crowns. Dent Mater 22:125–132PubMedCrossRef

41.

Abduo J, Lyons K, Swain M (2010) Fit of zirconia fixed partial denture: a systematic review. J Oral Rehab 47:866–876CrossRef

42.

Scotti R, Cardelli P, Baldissara P, Monaco C (2011) Clinical fitting of CAD/CAM zirconia single crowns generated from digital intraoral impressions based on active wavefront sampling. J Dent. doi:10.1016/j.jdent.2011.10.005

43.

Suttor D, Bunke K, Hoescheller S, Hauptmann H, Hertlein G (2001) LAVA—the system for all-ceramic ZrO₂ crown and bridge frameworks. Int Comput Dent 4:195–206

44.

Moldovan O, Luthardt RG, Corcodel N, Rudolph H (2011) Three-dimensional fit of CAD/CAM-made zirconia copings. Dent Mater 27(12):1273–1278PubMedCrossRef

Titel: Marginal and internal fit of four-unit zirconia fixed dental prostheses based on digital and conventional impression techniques
verfasst von: Júnio S. Almeida e Silva
Kurt Erdelt
Daniel Edelhoff
Élito Araújo
Michael Stimmelmayr
Luiz Clovis Cardoso Vieira
Jan-Frederik Güth
Publikationsdatum: 01.03.2014
Verlag: Springer Berlin Heidelberg
Erschienen in: Clinical Oral Investigations / Ausgabe 2/2014
Print ISSN: 1432-6981
Elektronische ISSN: 1436-3771
DOI: https://doi.org/10.1007/s00784-013-0987-2

Neu im Fachgebiet Zahnmedizin

11.04.2024 | Endokarditis | Nachrichten

Newsletter bestellen

Springer Medizin

Marginal and internal fit of four-unit zirconia fixed dental prostheses based on digital and conventional impression techniques

Abstract

Objectives

Materials and method

Results

Conclusions

Clinical relevance

Neu im Fachgebiet Zahnmedizin

Invasive Zahnbehandlung: Wann eine Antibiotikaprophylaxe vor infektiöser Endokarditis schützt

Zell-Organisatoren unter Druck: Mechanismen des embryonalen Zahnwachstums aufgedeckt

Die Oralprophylaxe & Kinderzahnheilkunde umbenannt

Die Hybrid-DRG kann jetzt abgerechnet werden – zunächst mit Pseudoziffern

Newsletter

Springer Medizin

Abstract

Objectives

Materials and method

Results

Conclusions

Clinical relevance

Bitte loggen Sie sich ein, um Zugang zu diesem Inhalt zu erhalten

Weitere Artikel der Ausgabe 2/2014

Association of MTHFR gene C677T mutation with recurrent aphthous stomatitis and number of oral ulcers

Expanding the spectrum of PTH1R mutations in patients with primary failure of tooth eruption

Immunohistochemical analysis of staged guided bone regeneration and osseointegration of titanium implants using a polyethylene glycol membrane

Relevance of surgical management of patients affected by bisphosphonate-associated osteonecrosis of the jaws. A prospective clinical and radiological study

Periodontal intraligament injection as alternative to inferior alveolar nerve block—meta-analysis of the literature from 1979 to 2012

Marginal adaptation of ceramic and composite inlays in minimally invasive mod cavities

Neu im Fachgebiet Zahnmedizin

Invasive Zahnbehandlung: Wann eine Antibiotikaprophylaxe vor infektiöser Endokarditis schützt

Zell-Organisatoren unter Druck: Mechanismen des embryonalen Zahnwachstums aufgedeckt

Die Oralprophylaxe & Kinderzahnheilkunde umbenannt

Die Hybrid-DRG kann jetzt abgerechnet werden – zunächst mit Pseudoziffern

Newsletter