Introduction
Selective digestive decontamination (SDD) is a preventive antibiotic regimen that contains, among others, colistin as one of the topical components. SDD has been shown to reduce intensive care unit (ICU)-acquired infections and mortality in settings with low levels of antimicrobial resistance and is therefore standard of care in the Netherlands for ICU-patients [
1,
2]. Colistin is increasingly regarded as a last-resort antibiotic against infections with multidrug-resistant Gram-negative bacteria (GNB) [
3]. Dissemination of colistin resistance among GNB already resistant to other classes of antibiotics could potentially limit treatment options for patients infected with multidrug-resistant GNB, emphasizing the importance of optimizing surveillance and laboratory detection of colistin resistance.
Testing for phenotypic colistin-susceptibility however, is problematic [
4‐
8]. A 2016 joint CLSI-EUCAST Working Group recommended that only broth microdilution (BMD) methods be used for testing of colistin susceptibility [
9]. However, BMD requires manual preparation leading to potential errors, is labour-intensive and is difficult to implement in many routine clinical microbiology laboratories. Previous studies have suggested that the use of the commercially available SuperPolymyxin™ selective medium (ELITech Group, Puteaux, France) may improve the detection of colistin-resistant GNB in surveillance samples [
10,
11].
The aim of the current study was to determine the added value of using SuperPolymyxin™ in addition to the conventional screening method with non-selective media in the detection of rectal carriage with acquired colistin-resistant GNB in a Dutch tertiary-care ICU that routinely uses SDD.
Materials and methods
Study design
A cross-sectional study with prospective data collection was performed from 9 July 2018 until 24 January 2019 in a 40-bed ICU of a tertiary care hospital in the Netherlands (University Medical Center Utrecht, Utrecht). All consecutive rectal swabs of ICU-patients taken during routine SDD surveillance were included and were taken at ICU-admission and twice weekly thereafter until ICU-discharge. Swabs were excluded in case of missing inoculation in either method. Ethical approval of patients was not deemed applicable because this was a laboratory quality improvement study and only anonymized medical microbiology data were used.
Use of conventional non-selective media and the SuperPolymyxin™ medium
Rectal swabs were first inoculated on non-selective media (conventional method): tryptic soy, 5% sheep blood agar (BA, BD254087, Becton Dickinson, Erembodegem, Belgium), secondly on non-selective MacConkey agar (McC, BD257286) and thirdly on Malt extract agar (MEA, in-house manufactured). Fourthly, the swab was inoculated on the selective SuperPolymyxin™ medium. Plates were incubated at 37 °C for 48 h either in 5% CO2 (BA), or in ambient air (McC, MEA, SuperPolymyxin™). All plates were visually examined after 24 and 48 h of incubation. Technicians that visually inspected growth on the conventional method were blinded for results of the SuperPolymyxin™ medium, and vice versa. All different colony morphologies that were suspected of being GNB were subjected to species identification by MALDI-TOF MS (Bruker, Bremen, Germany) and all Gram-negative isolates were stored at − 80 °C.
Colistin broth microdilution
MIC determination was performed on all Gram-negative isolates of species that are not intrinsically resistant to colistin using Sensititre™ FRCOL plates (Thermo Fisher Scientific, Wesel, Germany) according to the manufacturer’s instructions.
E. coli ATCC25922 and
E. coli NCTC13846 were included as control strains daily. Colistin MICs were interpreted according to EUCAST 2019 guidelines [
12]. Colistin resistance of isolates that were tested colistin-resistant with Sensititre™ was confirmed using a broth microdilution method in line with EUCAST guidelines [
9,
13].
Stenotrophomonas maltophilia and
Achromobacter xylosoxidans were excluded from analyses because of missing EUCAST and CLSI susceptibility breakpoints for colistin.
Mcr-gene detection
Genomic sequences of the isolates that tested colistin-resistant with BMD were subjected to screening for
mcr-genes using ResFinder 3.2 [
14].
Statistical analyses
Contingency tables were made for the conventional method compared to SuperPolymyxin™ in the detection of ICU-patients with a rectal swab positive for ≥ 1 isolate that exhibited acquired colistin resistance at any time point during ICU-stay and rectal swabs positive for ≥ 1 isolate that exhibited acquired colistin resistance. Acquired colistin resistance was defined as colistin resistance determined with BMD in species that are usually susceptible to colistin. Isolates from a single rectal swab with different colony morphologies on the SuperPolymyxin™ plate but belonging to identical species and with similar colistin MICs were counted only once. The number of isolates that grew on SuperPolymyxin™ but were colistin-susceptible with BMD using Sensititre™ (i.e. false-resistant result) was reported, as well as the number of colistin-resistant isolates that was found in the conventional method but did not grow on SuperPolymyxin™ medium (i.e. false-susceptible result).
The value of SuperPolymyxin™ as a screening method for routine colistin-susceptibility testing was examined by comparing the use of SuperPolymyxin™ with implementation of routine colistin BMD using Sensititre™. Three scenarios were compared: (1) implementation of routine colistin Sensititre™ BMD for all Gram-negative isolates detected in the conventional (non-selective) method, (2) addition of SuperPolymyxin™ to the current laboratory pipeline and performing colistin Sensititre™ BMD on all isolates detected in either the conventional method or SuperPolymyxin™ and (3) addition of SuperPolymyxin™ to the current pipeline and only performing colistin Sensititre™ BMD on isolates detected through SuperPolymyxin™ (i.e. using SuperPolymyxin™ as a screening medium). We calculated maximum costs per SuperPolymyxin™ plate for the use of SuperPolymyxin™ as a screening medium to be under the costs of performing colistin BMD using Sensititre™ on all isolates detected with the conventional method.
This was a pragmatic study without a formal sample size calculation; the aim was to include 1000 rectal swabs. All analyses were performed with Statistical Package for Social Sciences V.25.0 (SPSS, Chicago, Illinois, USA).
Discussion
In this prospective study, embedded in routine surveillance of ICU-patients that receive SDD, the combined use of conventional inoculation methods and selective SuperPolymyxin™ medium had the highest diagnostic yields in detecting rectal carriers of isolates that exhibited acquired colistin resistance, rectal swabs positive for isolates that exhibited acquired colistin resistance and the total number of detected colistin-resistant Gram-negative isolates.
Previous studies that assessed the diagnostic performance and applicability of the commercial SuperPolymyxin™ medium in routine screening reported varying results [
10,
15,
16]. In one study, rectal swabs were spiked with 94 well-characterized
Enterobacterales (of which 53 with acquired colistin resistance), and sensitivity and specificity of the SuperPolymyxin medium™ were 86.8% (95% CI 74.0–94.0%) and 97.5% (95% CI 85.6–99.9%), respectively [
16]. In another study, 100% (33/33) sensitivity and 90.3% (56/62) specificity of SuperPolymyxin™ were reported [
10]. In the current study, we did not aim to determine sensitivity and specificity of the test. However, we did find one false-negative result of the SuperPolymyxin™ medium (11.1%, 95% CI 2.0–43.5%). A possible explanation could be that SuperPolymyxin™ was inoculated as the fourth medium, potentially leading to reduced bacterial loads on rectal swabs upon inoculation of SuperPolymyxin™. Our inoculation method might bias our results towards false-negative results of SuperPolymyxin™ in case of low density inocula. However, it is currently standard procedure to inoculate plates directly from rectal swabs, with a standard order from non-selective media to selective media. Thus, this is how SuperPolymyxin™ medium would be used in our routine practice, which was the main research aim of the current study.
Strengths of the current study were the prospective data collection and study design, which were embedded in our current routine laboratory pipeline of SDD surveillance. To decrease observer bias, all observers were blinded for the results of the alternative method. One of the study limitations was the number of isolates that were not stored according to protocol, as one of the technicians was not aware of the study instruction to store all Gram-negative isolates that grew on either method. Another limitation was that the total amount of identified isolates with acquired colistin resistance was relatively low. It is known that the performance of SuperPolymyxin™ is different for different Gram-negative species, so it is important to note that some important species were not encountered during our study period (i.e.
Salmonella sp.,
Acinetobacter baumannii) [
10]. This could have influenced the determination of error rates of the SuperPolymyxin™ medium (in unknown direction). Use of an enrichment broth might have increased diagnostic yield; however, this was not included as part of the current study. Lastly, this study was performed in a single-center ICU that routinely uses SDD, and results therefore may not be generalizable to all other clinical settings.
We tested a two-step approach, in which screening through SuperPolymyxin™ was followed by colistin BMD testing using Sensititre™. Naturally, it is important to consider both additional value and costs before implementing new diagnostic tools. The added value depends on the aim of colistin susceptibility testing (i.e. research, surveillance or direct patient care), the clinical impact of identifying colistin resistance and the impact of potential missed cases. In our setting with low prevalence of colistin resistance, total diagnostic yield will always be low. Still, given the resource-dense nature of colistin BMD testing, results of the current study support the use of colistin-selective media as a screening method in case of daily large numbers of screening samples, such as in our SDD surveillance setting. Future research could determine the value of SuperPolymyxin™ in other settings, for example in laboratories in which colistin BMD testing is already part of routine practice or in countries with higher prevalence of colistin resistance.
In conclusion, in a routine surveillance setting of ICU-patients that receive SDD, the combined use of non-selective media and selective SuperPolymyxin™ medium had the highest diagnostic yield in detecting Gram-negative isolates with acquired colistin resistance. However, overall prevalence of acquired colistin resistance was low.
Acknowledgements
We would sincerely like to thank Sjoukje van Gorkum and Arjen Cornelisse for their part in the laboratory execution of this study. Preliminary results of this paper were presented at the 29th European Congress of Clinical Microbiology & Infectious Diseases, Amsterdam, the Netherlands, 13–16 April 2019 (P1401).
Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.
Publisher’s note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.