nach oben

Journal of Orofacial Orthopedics / Fortschritte der Kieferorthopädie

Erschienen in:

29.11.2022 | Original Article

Influence of surface treatments on the bond strength of metal brackets to CAD/CAM materials and discoloration after various refinishing procedures

Scanning electron microscopy and atomic force microscopy study

verfasst von: Murat Tunca, Beyza Unalan Degirmenci

Erschienen in: Journal of Orofacial Orthopedics / Fortschritte der Kieferorthopädie | Sonderheft 3/2023

Einloggen, um Zugang zu erhalten

Abstract

Purpose

This study evaluated the shear bond strength (SBS) of a metal bracket bonded to three different computer-aided design/computer-aided manufacturing (CAD/CAM) restoration materials pretreated with different surface treatments. In addition, the surface topography and color change of the restorations after debonding with two different tungsten carbide burs were examined.

Methods

A total of 216 plates were cut from three different CAD/CAM blocks, each of which was divided into three subgroups with different pretreatment methods: (1) acid etching, (2) sandblasting, and (3) laser irradiation. Incisor metal brackets were bonded. The SBS test was performed, and the failure types were classified. Then, samples were randomly divided into two subgroups according to the adhesive removal procedure to be used: a tungsten carbide bur with 12 blades or 24 blades (n = 12). Color change was calculated based on the ∆E₀₀, and surface morphology was evaluated via SEM and AFM analysis.

Results

The SBS data revealed that the type of CAD/CAM material and the applied surface treatment significantly affected bond strength. The highest SBS values were detected for the Grandio Blocs (VOCO GmbH, Cuxhaven, Germany; 14.3 ± 4.4 MPa), and the lowest was observed for Cerasmart (GC Europe, Leuven, Belgium; 12.0 ± 4.0 MPa). The ∆E₀₀ results demonstrated significant differences only as a result of the applied surface treatment. The ∆E₀₀ value in all groups was above the 1.77 threshold.

Conclusion

CAD/CAM material types and surface treatments affected the bond strength, but the interactions of these factors did not. The chosen surface treatment also significantly affected the ∆E₀₀ after the polishing was done.

Kurt İ, Çehreli ZC, Özçırpıcı AA, Şar Ç (2019) Biomechanical evaluation between orthodontic attachment and three different materials after various surface treatments: a three-dimensional optical profilometry analysis. Angle Orthod 89:742–750. https://doi.org/10.2319/072918-547.1CrossRefPubMedPubMedCentral

Elsaka SE (2016) Influence of surface treatments on bond strength of metal and ceramic brackets to a novel CAD/CAM hybrid ceramic material. Odontology 104:68–76. https://doi.org/10.1007/s10266-014-0188-8CrossRefPubMed

Spitznagel FA, Boldt J, Gierthmuehlen PC (2018) CAD/CAM ceramic restorative materials for natural teeth. J Dent Res 97:1082–1091. https://doi.org/10.1177/0022034518779759CrossRefPubMed

Coldea A, Swain MV, Thiel N (2013) Mechanical properties of polymer-infiltrated-ceramic-network materials. Dent Mater 29:419–426. https://doi.org/10.1016/j.dental.2013.01.002CrossRefPubMed

Ghozy EA, Shamaa MS, El-Bialy AA (2020) In vitro testing of shear bond strength of orthodontic brackets bonded to different novel CAD/CAM ceramics. J Dent Res Dent Clin Dent Prospects 14:239–243. https://doi.org/10.34172/joddd.2020.042CrossRefPubMedPubMedCentral

Gunal B, Ulusoy MM (2018) Optical properties of contemporary monolithic CAD-CAM restorative materials at different thicknesses. J Esthet Restor Dent 30:434–441. https://doi.org/10.1111/jerd.12382CrossRefPubMed

Yin R, Jang Y‑S, Lee M‑H, Bae T‑S (2019) Comparative evaluation of mechanical properties and wear ability of five CAD/CAM dental blocks. Materials 12:2252. https://doi.org/10.3390/ma12142252CrossRefPubMedPubMedCentral

Kukiattrakoon B, Samruajbenjakul B (2010) Shear bond strength of ceramic brackets with various base designs bonded to aluminous and fluorapatite ceramics. Eur J Orthod 32:87–93. https://doi.org/10.1093/ejo/cjp055CrossRefPubMed

Saraç YŞ, Külünk T, Elekdağ-Türk S et al (2011) Effects of surface-conditioning methods on shear bond strength of brackets bonded to different all-ceramic materials. Eur J Orthod 33:667–672. https://doi.org/10.1093/ejo/cjq132CrossRefPubMed

10.

Buyuk SK, Kucukekenci AS (2018) Effects of different etching methods and bonding procedures on shear bond strength of orthodontic metal brackets applied to different CAD/CAM ceramic materials. Angle Orthod 88:221–226. https://doi.org/10.2319/070917-455.1CrossRefPubMed

11.

Alzainal AH, Majud AS, Al-Ani AM, Mageet AO (2020) Orthodontic bonding: review of the literature. Int J Dent. https://doi.org/10.1155/2020/8874909CrossRefPubMedPubMedCentral

12.

Unalan Degirmenci B, Degirmenci A, Karadag Naldemir (2021) Effects of Er,Cr:YSGG laser on repair bond strength of 5‑year water-aged and non-aged CAD/CAM ceramics. Int J Appl Ceram Technol 19:1594–1604. https://doi.org/10.1111/ijac.13975CrossRef

13.

Mirhashemi AH, Chiniforush N, Sharifi N, Hosseini AM (2018) Comparative efficacy of Er,Cr:YSGG and Er:YAG lasers for etching of composite for orthodontic bracket bonding. Lasers Med Sci 33:835–841. https://doi.org/10.1007/s10103-017-2417-1CrossRefPubMed

14.

Kato H, Matsumura H, Ide T, Atsuta M (2001) Improved bonding of adhesive resin to sintered porcelain with the combination of acid etching and a two-liquid silane conditioner. J Oral Rehabil 28:102–108. https://doi.org/10.1046/j.1365-2842.2001.00627.xCrossRefPubMed

15.

Kara M, Demir Ö, Doğru M (2020) Bond strength of metal and ceramic brackets on resin nanoceramic material with different surface treatments. Turk J Orthod 33:115–122. https://doi.org/10.5152/TurkJOrthod.2020.19103CrossRefPubMedPubMedCentral

16.

Özarslan MM, Üstün Ö, Buyukkaplan US et al (2018) Assessment the bond strength of ceramic brackets to CAD/CAM nanoceramic composite and Interpenetrating network composite after different surface treatments. Biomed Res Int. https://doi.org/10.1155/2018/1871598CrossRefPubMedPubMedCentral

17.

Piascik JR, Wolter SD, Stoner BR (2011) Development of a novel surface modification for improved bonding to zirconia. Dent Mater 27:e99–e105. https://doi.org/10.1016/j.dental.2011.01.005CrossRefPubMed

18.

Moradi M, Hormozi E, Shamohammadi M, Rakhshan V (2018) Effects of debonding of orthodontic brackets on topography and surface roughness of composite restorations. Int Orthod 16:623–637. https://doi.org/10.1016/j.ortho.2018.09.017CrossRefPubMed

19.

Herion DT, Ferracane JL, Covell DA (2010) Porcelain surface alterations and refinishing after use of two orthodontic bonding methods. Angle Orthod 80:167–174. https://doi.org/10.2319/010909-19.1CrossRefPubMedPubMedCentral

20.

Gorucu-Coskuner H, Atik E, Taner T (2018) Tooth color change due to different etching and debonding procedures. Angle Orthod 88:779–784. https://doi.org/10.2319/122017-872.1CrossRefPubMedPubMedCentral

21.

Artun J, Bergland S (1984) Clinical trials with crystal growth conditioning as an alternative to acid-etch enamel pretreatment. Am J Orthod 85:333–340. https://doi.org/10.1016/0002-9416(84)90190-8CrossRefPubMed

22.

Paravina RD, Ghinea R, Herrera LJ et al (2015) Color difference thresholds in dentistry. J Esthet Restor Dent 27(Suppl 1):S1–S9. https://doi.org/10.1111/jerd.12149CrossRefPubMed

23.

Sarahneh O, Günal-Abduljalil B (2021) The effect of silane and universal adhesives on the micro-shear bond strength of current resin-matrix ceramics. J Adv Prosthodont 13:292–303. https://doi.org/10.4047/jap.2021.13.5.292CrossRefPubMedPubMedCentral

24.

Moura DMD, Veríssimo AH, Leite Vila-Nova TE et al (2021) Which surface treatment promotes higher bond strength for the repair of resin nanoceramics and polymer-infiltrated ceramics? A systematic review and meta-analysis. J Prosthet Dent. https://doi.org/10.1016/j.prosdent.2020.06.009CrossRefPubMed

25.

Karan S, Toroglu MS (2008) Porcelain refinishing with two different polishing systems after orthodontic debonding. Angle Orthod 78:947–953. https://doi.org/10.2319/081307-374.1CrossRefPubMed

26.

Reynolds IR (1975) A review of direct orthodontic bonding. Br J Orthod 2:171–178. https://doi.org/10.1080/0301228X.1975.11743666CrossRef

27.

Günal-Abduljalil B, Önöral Ö, Ongun S (2021) Micro-shear bond strengths of resin-matrix ceramics subjected to different surface conditioning strategies with or without coupling agent application. J Adv Prosthodont 13:180–190. https://doi.org/10.4047/jap.2021.13.3.180CrossRefPubMedPubMedCentral

28.

Lung CYK, Matinlinna JP (2012) Aspects of silane coupling agents and surface conditioning in dentistry: an overview. Dent Mater 28:467–477. https://doi.org/10.1016/j.dental.2012.02.009CrossRefPubMed

29.

Falkensammer F, Freudenthaler J, Pseiner B, Bantleon HP (2012) Influence of surface conditioning on ceramic microstructure and bracket adhesion. Eur J Orthod 34:498–504. https://doi.org/10.1093/ejo/cjr034CrossRefPubMed

30.

Ozden AN, Akaltan F, Can G (1994) Effect of surface treatments of porcelain on the shear bond strength of applied dual-cured cement. J Prosthet Dent 72:85–88. https://doi.org/10.1016/0022-3913(94)90216-xCrossRefPubMed

31.

Schmage P, Nergiz I, Herrmann W, Ozcan M (2003) Influence of various surface-conditioning methods on the bond strength of metal brackets to ceramic surfaces. Am J Orthod Dentofacial Orthop 123:540–546. https://doi.org/10.1067/mod.2003.S0889540602569110CrossRefPubMed

32.

Boncuk Y, Cehreli ZC, Polat-Özsoy Ö (2014) Effects of different orthodontic adhesives and resin removal techniques on enamel color alteration. Angle Orthod 84:634–641. https://doi.org/10.2319/060613-433.1CrossRefPubMed

33.

Jarvis J, Zinelis S, Eliades T, Bradley TG (2006) Porcelain surface roughness, color and gloss changes after orthodontic bonding. Angle Orthod 76:274–277. https://doi.org/10.1043/0003-3219(2006)076[0274:PSRCAG]2.0.CO;2CrossRefPubMed

34.

St-Pierre L, Martel C, Crépeau H, Vargas MA (2019) Influence of polishing systems on surface roughness of composite resins: polishability of composite resins. Oper Dent 44:E122–E132. https://doi.org/10.2341/17-140-LCrossRefPubMed

Titel: Influence of surface treatments on the bond strength of metal brackets to CAD/CAM materials and discoloration after various refinishing procedures
Scanning electron microscopy and atomic force microscopy study
verfasst von: Murat Tunca
Beyza Unalan Degirmenci
Publikationsdatum: 29.11.2022
Verlag: Springer Medizin
Erschienen in: Journal of Orofacial Orthopedics / Fortschritte der Kieferorthopädie / Ausgabe Sonderheft 3/2023
Print ISSN: 1434-5293
Elektronische ISSN: 1615-6714
DOI: https://doi.org/10.1007/s00056-022-00434-2

Bestellen Sie unseren kostenlosen Newsletter Update Zahnmedizin und bleiben Sie gut informiert – ganz bequem per eMail.

Newsletter bestellen

Klimawandel und Gesundheit: Was Sie in der Hausarztpraxis wissen müssen und tun können

Springer Medizin

Influence of surface treatments on the bond strength of metal brackets to CAD/CAM materials and discoloration after various refinishing procedures

Scanning electron microscopy and atomic force microscopy study

Abstract

Purpose

Methods

Results

Conclusion

Neu im Fachgebiet Zahnmedizin

Darf man die Behandlung eines Neonazis ablehnen?

Ein Drittel der jungen Ärztinnen und Ärzte erwägt abzuwandern

Endlich: Zi zeigt, mit welchen PVS Praxen zufrieden sind

Parodontalbehandlung verbessert Prognose bei Katheterablation

Newsletter

Klimawandel und Gesundheit: Was Sie in der Hausarztpraxis wissen müssen und tun können

Springer Medizin

Abstract

Purpose

Methods

Results

Conclusion

Bitte loggen Sie sich ein, um Zugang zu diesem Inhalt zu erhalten

Weitere Artikel der Sonderheft 3/2023

Comparison of the asymmetry index determined on digital panoramic radiographic images and on posteroanterior cephalometric images: a retrospective cross-sectional study

Multiheaded mandibular condyles

Soft tissue evaluation after maxillary protraction with RPE or with the ALT-RAMEC protocol

Effect of light-emitting photobiomodulation therapy on the rate of orthodontic tooth movement

Bonded lingual retainer adhesives and discoloration

Effects of maxillary expansion and protraction on pharyngeal airway dimensions in relation to changes in head posture and hyoid position

Neu im Fachgebiet Zahnmedizin

Darf man die Behandlung eines Neonazis ablehnen?

Ein Drittel der jungen Ärztinnen und Ärzte erwägt abzuwandern

Endlich: Zi zeigt, mit welchen PVS Praxen zufrieden sind

Parodontalbehandlung verbessert Prognose bei Katheterablation

Newsletter