nach oben

Journal of Orofacial Orthopedics / Fortschritte der Kieferorthopädie

Erschienen in:

02.10.2019 | Original Article

Effect of in vitro aging by water immersion and thermocycling on the mechanical properties of PETG aligner material

verfasst von: Benjamin A. Ihssen, Jan H. Willmann, Amr Nimer, Dieter Drescher

Erschienen in: Journal of Orofacial Orthopedics / Fortschritte der Kieferorthopädie | Ausgabe 6/2019

Einloggen, um Zugang zu erhalten

Abstract

Purpose

The mechanical properties of orthodontic aligners made from thermoplastic polymers decrease over time in the intraoral milieu. However, there is a lack of information on this topic in the literature. Thus, the elastic properties of polyethylene terephthalate glycol (PETG) aligner films were investigated in vitro under extreme temperature changes simulated by thermocycling, environmental temperature and water absorption.

Materials and methods

A total of 60 specimens made from PETG aligner films (CA Clear Aligner, Scheu Dental, Iserlohn, Germany) were divided into three groups (immersed in distilled water, subjected to accelerated ageing by thermocycling, control). These groups were again divided and tensile testing was performed for all groups at 22 and at 37 °C. Young’s modulus (E), 0.2% offset yield strength (R_p02) and ultimate tensile strength (UTS) were evaluated. Water absorption was determined using an analytical scale.

Results

All treated specimens showed water absorption, whereby specimens that were thermocycled absorbed 48% more water than the immersed ones. Young’s modulus and UTS were significantly lower for all three groups at 37 °C compared to the corresponding groups tested at 22 °C. Thermocycled and immersed groups showed a significantly lower Young’s modulus compared to the control group tested at the same temperature. The mean R_p02 was statistically different when comparing the control group tested at 22 °C to the one tested at 37 °C.

Conclusions

The results of this study add to the understanding of the clinically well-known degradation of orthodontic aligners during wear time. Extreme alternating temperatures along with warming up to intraoral temperature and water absorption can reduce the material’s Young’s modulus and may therefore promote a decrease of resulting orthodontic forces.

Ahn HW, Ha HR, Lim HN, Choi S (2015) Effects of aging procedures on the molecular, biochemical, morphological, and mechanical properties of vacuum-formed retainers. J Mech Behav Biomed Mater 51:356–366. https://doi.org/10.1016/j.jmbbm.2015.07.026 CrossRefPubMed

Alexandropoulos A, Al Jabbari YS, Zinelis S, Eliades T (2015) Chemical and mechanical characteristics of contemporary thermoplastic orthodontic materials. Aust Orthod J 31(2):165–170PubMed

Arici S, Arici N (2003) Effects of thermocycling on the bond strength of a resin-modified glass ionomer cement: an in vitro comparative study. Angle Orthod 73(6):692–696. https://doi.org/10.1043/0003-3219(2003)073 CrossRefPubMed

Barany TTC (2003) Effect of thermal ageing on fracture characteristics of an amorphous copolyester (PETG). Int J Polym Sci 31(1):381–385

Barany T, Földes E, Czigany T (2007) Effect of thermal and hygrothermal aging on plane stress toughness of ployethylene terephthylate sheets. Express Polym Lett 1(3):180–187CrossRef

Boubakri A, Elleuch K, Guermazi N, Ayedi HF (2009) Investigations on hygrothermal aging of thermoplastic polyurethane material. Mater Des 30(10):3958–3965. https://doi.org/10.1016/j.matdes.2009.05.038 CrossRef

Brezniak N, Wasserstein A (2016) Orthodontic root resorption: a new perspective. Angle Orthod 86(6):1056–1057. https://doi.org/10.2319/0003-3219-86.6.1056 CrossRefPubMed

Scheu-Dental GmbH (2019) CA Clear Aligner Treatment Process. https://www.ca-clear-aligner.com/b2c/index.html. Accessed 10 Mar 2019

Canbek K, Karbach M, Gottschalk F, Erbe C, Wehrbein H (2013) Evaluation of bovine and human teeth exposed to thermocycling for microleakage under bonded metal brackets. J Orofac Orthop 74(2):102–112. https://doi.org/10.1007/s00056-012-0123-y CrossRefPubMed

10.

Chen Y, Lin Z, Yang S (1998) Plasticization and crystallization of Polyethylne Tereptherlate induced by water. J Therm Anal Calorim 52:565–568CrossRef

11.

Daub J, Berzins DW, Linn BJ, Bradley TG (2006) Bond strength of direct and indirect bonded brackets after thermocycling. Angle Orthod 76(2):295–300. https://doi.org/10.1043/0003-3219(2006)076 CrossRefPubMed

12.

De Abreu Neto HF, Costa AR, Correr AB et al (2015) Influence of light source, Thermocycling and Silane on the shear bond strength of metallic brackets to ceramic. Braz Dent J 26(6):685–688. https://doi.org/10.1590/0103-6440201300416 CrossRefPubMed

13.

de Almeida Pdel V, Gregio AM, Machado MA, de Lima AA, Azevedo LR (2008) Saliva composition and functions: a comprehensive review. J Contemp Dent Pract 9(3):72–80CrossRef

14.

Dhakal HN, Zhang ZY, Richardson MOW (2007) Effect of water absorption on the mechanical properties of hemp fibre reinforced unsaturated polyester composites. Compos Sci Technol 67(7):1674–1683. https://doi.org/10.1016/j.compscitech.2006.06.019 CrossRef

15.

Deutsches Institut für Normung (2012) Kunststoffe – Bestimmung der Zugeigenschaften – Teil 1: Allgemeine Grundsätze (ISO 527-1:2012). Beuth Verlag GmbH, Berlin (Deutsche Fassung EN ISO 527-1:2012 (Polymers—Determination of tensile properties—Part 1: Gerneral principals (ISO 527-1:2012); German Version EN ISO 527-1:2012))

16.

DIN Deutsches Istitut für Normung e. V. (2012) Kunststoffe – Bestimmung der Zugeigenschaften – Teil 2: Prüfbedingungen für Form- und Extrusionsmassen (ISO 527-2:2012). Beuth Verlag GmbH, Berlin (Deutsche Fassung EN ISO 527-2:2012 (Polymers—Determination of tensile properties—Part 2: Testing conditions for moulding and extrusion materials (ISO 527-2:2012); German version EN ISO 527-2:2012))

17.

Dupaix RB, Boyce MC (2005) Finite strain behavior of poly(ethylene terephthalate) (PET) and poly(ethylene terephthalate)-glycol (PETG). Polymer (Guildf) 46(13):4827–4838. https://doi.org/10.1016/j.polymer.2005.03.083 CrossRef

18.

Elhaddaoui R, Qoraich HS, Bahije L, Zaoui F (2017) Orthodontic aligners and root resorption: a systematic review. Int Orthod 15(1):1–12. https://doi.org/10.1016/j.ortho.2016.12.019 CrossRefPubMed

19.

Eliades T, Bourauel C (2005) Intraoral aging of orthodontic materials: the picture we miss and its clinical relevance. Am J Orthod Dentofacial Orthop 127(4):403–412. https://doi.org/10.1016/j.ajodo.2004.09.015 CrossRefPubMed

20.

Elkholy F, Panchaphongsaphak T, Kilic F, Schmidt F, Lapatki BG (2015) Forces and moments delivered by PET‑G aligners to an upper central incisor for labial and palatal translation. J Orofac Orthop 76(6):460–475. https://doi.org/10.1007/s00056-015-0307-3 CrossRefPubMed

21.

Elkholy F, Schmidt F, Jager R, Lapatki BG (2016) Forces and moments delivered by novel, thinner PET‑G aligners during labiopalatal bodily movement of a maxillary central incisor: an in vitro study. Angle Orthod 86(6):883–890. https://doi.org/10.2319/011316-37r.1 CrossRefPubMed

22.

Fang D, Zhang N, Chen H, Bai Y (2013) Dynamic stress relaxation of orthodontic thermoplastic materials in a simulated oral environment. Dent Mater J 32(6):946–951CrossRef

23.

Gale MS, Darvell BW (1999) Thermal cycling procedures for laboratory testing of dental restorations. J Dent 27(2):89–99CrossRef

24.

Gay G, Ravera S, Castroflorio T et al (2017) Root resorption during orthodontic treatment with Invisalign(R): a radiometric study. Prog Orthod 18(1):12. https://doi.org/10.1186/s40510-017-0166-0 CrossRefPubMedPubMedCentral

25.

Gomez JP, Pena FM, Martinez V, Giraldo DC, Cardona CI (2015) Initial force systems during bodily tooth movement with plastic aligners and composite attachments: a three-dimensional finite element analysis. Angle Orthod 85(3):454–460. https://doi.org/10.2319/050714-330.1 CrossRefPubMed

26.

Goracci C, Margvelashvili M, Giovannetti A, Vichi A, Ferrari M (2013) Shear bond strength of orthodontic brackets bonded with a new self-adhering flowable resin composite. Clin Oral Investig 17(2):609–617. https://doi.org/10.1007/s00784-012-0729-x CrossRefPubMed

27.

Hahn W, Dathe H, Fialka-Fricke J et al (2009) Influence of thermoplastic appliance thickness on the magnitude of force delivered to a maxillary central incisor during tipping. Am J Orthod Dentofacial Orthop 136(1):12 e11–12 e17. https://doi.org/10.1016/j.ajodo.2008.12.015 (discussion 12–13)CrossRef

28.

Hahn W, Engelke B, Jung K et al (2010) Initial forces and moments delivered by removable thermoplastic appliances during rotation of an upper central incisor. Angle Orthod 80(2):239–246. https://doi.org/10.2319/033009-181.1 CrossRefPubMed

29.

Hahn W, Zapf A, Dathe H et al (2010) Torquing an upper central incisor with aligners—acting forces and biomechanical principles. Eur J Orthod 32(6):607–613. https://doi.org/10.1093/ejo/cjq007 CrossRefPubMed

30.

Hussein M (2018) Effects of strain rate and temperature on the mechanical behavior of carbon black reinforced elastomers based on butyl rubber and high molecular weight polyethylene. Results Phys 9:511–517. https://doi.org/10.1016/j.rinp.2018.02.043 CrossRef

31.

ISO International Organization for Standardization (2015) ISO/TS 11405:2015 Dentistry—Testing of adhesion to tooth structure. ISO International Organization for Standardization, Geneva, Switzerland

32.

Kattan M, Dargent E, Ledru J, Grenet J (2001) Strain-induced crystallization in uniaxially drawn PETG plates. J Appl Polym Sci 81(14):3405–3412. https://doi.org/10.1002/app.1797 CrossRef

33.

Kesling HD (1945) The philosophy of the tooth positioning appliance. Am J Orthod Dentofacial Orthop 31(6):297–304. https://doi.org/10.1016/0096-6347(45)90101-3 CrossRef

34.

Kohda N, Iijima M, Muguruma T, Brantley WA, Ahluwalia KS, Mizoguchi I (2013) Effects of mechanical properties of thermoplastic materials on the initial force of thermoplastic appliances. Angle Orthod 83(3):476–483. https://doi.org/10.2319/052512-432.1 CrossRefPubMed

35.

Krishnan V, Davidovich Z (2015) Biological mechanisms of tooth movement vol 2. John Wiley & Sons, Ltd, Chichester, United KingdomCrossRef

36.

Lombardo L, Martines E, Mazzanti V, Arreghini A, Mollica F, Siciliani G (2016) Stress relaxation properties of four orthodontic aligner materials: a 24-hour in vitro study. Angle Orthod. https://doi.org/10.2319/113015-813.1 CrossRefPubMed

37.

Nielsen LE, Landel RF (1994) Mechanical properties of polymers and composites, 2nd edn. Marcel Dekkar, Inc., New York.

38.

Scheu Dental GmbH (2017) Produktdatenblatt CA® CLEAR-ALIGNER. https://www.scheu-dental.com/fileadmin/SCHEU-DENTAL/Downloads/08_Datenblaetter/Produktdatenblatt-CA-CLEAR-ALIGNER.pdf. Accessed 27 Sept 2017

39.

Align Technology, Inc. (2018) Q4 and 2017 Corporate Fact Sheet. http://www.aligntech.com/documents/Align%20Technology%20Corp%20Fact%20Sheet%202017%20Q4F.pdf. Accessed 9 Feb 2018

40.

Align Technology Inc. (2019) Q4 and 2018 Corporate Fact Sheet. http://www.aligntech.com/documents/Align%20Technology%20Corp%20Fact%20Sheet%202018%20Q4.pdf. Accessed 3 Mar 2019

41.

Richeton J, Ahzi S, Vecchio KS, Jiang FC, Adharapurapu RR (2006) Influence of temperature and strain rate on the mechanical behavior of three amorphous polymers: characterization and modeling of the compressive yield stress. Int J Solids Struct 43(7):2318–2335. https://doi.org/10.1016/j.ijsolstr.2005.06.040 CrossRef

42.

Richter C, Jost-Brinkmann PG (2015) Shear bond strength of different adhesives tested in accordance with DIN 13990-1/-2 and using various methods of enamel conditioning. J Orofac Orthop 76(2):175–187. https://doi.org/10.1007/s00056-014-0281-1 CrossRefPubMed

43.

Roylance D (2008) Mechanical properties of materials. MIT Massachusetts Institute of Technology, Massachusetts, USA

44.

Ryokawa H, Miyazaki Y, Fujishima A, Miyazaki T, Maki K (2006) The mechanical properties of dental thermoplastic materials in a simulated intraoral environment. Orthod Waves 65(2):64–72. https://doi.org/10.1016/j.odw.2006.03.003 CrossRef

45.

Schubert MA, Wiggins MJ, Schaefer MP, Hiltner A, Anderson JM (1995) Oxidative biodegradation mechanisms of biaxially strained poly(etherurethane urea) elastomers. J Biomed Mater Res 29(3):337–347. https://doi.org/10.1002/jbm.820290309 CrossRefPubMed

46.

Sheibaninia A (2014) Effect of thermocycling on nickel release from orthodontic arch wires: an in vitro study. Biol Trace Elem Res 162(1–3):353–359. https://doi.org/10.1007/s12011-014-0136-z CrossRefPubMed

47.

Simon M, Keilig L, Schwarze J, Jung BA, Bourauel C (2014) Forces and moments generated by removable thermoplastic aligners: incisor torque, premolar derotation, and molar distalization. Am J Orthod Dentofacial Orthop 145(6):728–736. https://doi.org/10.1016/j.ajodo.2014.03.015 CrossRefPubMed

48.

Sokucu O, Siso SH, Ozturk F, Nalcaci R (2010) Shear bond strength of orthodontic brackets cured with different light sources under Thermocycling. Eur J Dent 4(3):257–262CrossRef

49.

Zachrisson YO, Zachrisson BU, Buyukyilmaz T (1996) Surface preparation for orthodontic bonding to porcelain. Am J Orthod Dentofacial Orthop 109(4):420–430CrossRef

Titel: Effect of in vitro aging by water immersion and thermocycling on the mechanical properties of PETG aligner material
verfasst von: Benjamin A. Ihssen
Jan H. Willmann
Amr Nimer
Dieter Drescher
Publikationsdatum: 02.10.2019
Verlag: Springer Medizin
Erschienen in: Journal of Orofacial Orthopedics / Fortschritte der Kieferorthopädie / Ausgabe 6/2019
Print ISSN: 1434-5293
Elektronische ISSN: 1615-6714
DOI: https://doi.org/10.1007/s00056-019-00192-8

Update Zahnmedizin

Bestellen Sie unseren kostenlosen Newsletter und bleiben Sie gut informiert – ganz bequem per eMail.

Newsletter bestellen

Live-Webinar "Urologie und Sexualmedizin in der Praxis"

Springer Medizin

Effect of in vitro aging by water immersion and thermocycling on the mechanical properties of PETG aligner material

Abstract

Purpose

Materials and methods

Results

Conclusions

Neu im Fachgebiet Zahnmedizin

„Übersichtlicher Wegweiser“: Lauterbachs umstrittener Klinik-Atlas ist online

Klinikreform soll zehntausende Menschenleben retten

Darf man die Behandlung eines Neonazis ablehnen?

Ein Drittel der jungen Ärztinnen und Ärzte erwägt abzuwandern

Update Zahnmedizin

Live-Webinar "Urologie und Sexualmedizin in der Praxis"

Springer Medizin

Abstract

Purpose

Materials and methods

Results

Conclusions

Bitte loggen Sie sich ein, um Zugang zu diesem Inhalt zu erhalten

Weitere Artikel der Ausgabe 6/2019

Mitteilung des Präsidenten der DGKFO

Molecular biology of periodontal ligament fibroblasts and orthodontic tooth movement

Effect of different attachment geometries on the mechanical load exerted by PET‑G aligners during derotation of mandibular canines

Use of a laser fluorescence device for the in vitro activity assessment of incipient caries lesions

Torque efficiency of a customized lingual appliance

Mitteilungen der DGKFO

Neu im Fachgebiet Zahnmedizin

„Übersichtlicher Wegweiser“: Lauterbachs umstrittener Klinik-Atlas ist online

Klinikreform soll zehntausende Menschenleben retten

Darf man die Behandlung eines Neonazis ablehnen?

Ein Drittel der jungen Ärztinnen und Ärzte erwägt abzuwandern

Update Zahnmedizin