Issue 10, 2006

Air exposure assessment and biological monitoring of manganese and other major welding fume components in welders

Abstract

In a cross-sectional study, 96 welders were compared with 96 control subjects. Also 27 former welders, all diagnosed as having manganism, were examined. Exposure to welding fumes was determined in the 96 welders, while the concentration of elements in whole blood and urine was determined in all subjects. The geometric mean (GM) concentrations of manganese (Mn) and iron in the workroom air were 97 μg m−3 (range 3–4620 μg m−3; n = 188) and 894 μg m−3 (range 106–20 300 μg m−3; n = 188), respectively. Thus the Mn concentration in the workroom air was on average 10.6% (GM) of that of the Fe concentration. No substantial difference was observed in the air Mn concentrations when welding mild steel as compared to welding stainless steel. The arithmetic mean (AM) concentration of Mn in whole blood (B-Mn) was about 25% higher in the welders compared to the controls (8.6 vs. 6.9 μg l−1; p < 0.001), while the difference in the urinary Mn concentrations did not attain statistical significance. A Pearson’s correlation coefficient of 0.31 (p < 0.01) was calculated between B-Mn and Mn in the workroom air that was collected the day before blood sampling. Although the exposure to welding fumes in the patients had ceased on average 5.8 years prior to the study (range 4 years–7 years), their AM B-Mn concentration was still higher than in referents of similar age (8.7 μg l−1vs. 7.0 μg l−1). However, their urinary concentrations of cobolt, iron and Mn were all statistically significantly lower.

Graphical abstract: Air exposure assessment and biological monitoring of manganese and other major welding fume components in welders

Supplementary files

Article information

Article type
Paper
Submitted
19 Apr 2006
Accepted
24 Jul 2006
First published
14 Aug 2006

J. Environ. Monit., 2006,8, 1078-1086

Air exposure assessment and biological monitoring of manganese and other major welding fume components in welders

D. G. Ellingsen, L. Dubeikovskaya, K. Dahl, M. Chashchin, V. Chashchin, E. Zibarev and Y. Thomassen, J. Environ. Monit., 2006, 8, 1078 DOI: 10.1039/B605549D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Spotlight

Advertisements