Abstract
The method we introduced in 1992 for measuring hardness and elastic modulus by instrumented indentation techniques has widely been adopted and used in the characterization of small-scale mechanical behavior. Since its original development, the method has undergone numerous refinements and changes brought about by improvements to testing equipment and techniques as well as from advances in our understanding of the mechanics of elastic–plastic contact. Here, we review our current understanding of the mechanics governing elastic–plastic indentation as they pertain to load and depth-sensing indentation testing of monolithic materials and provide an update of how we now implement the method to make the most accurate mechanical property measurements. The limitations of the method are also discussed.
Similar content being viewed by others
References
W.C. Oliver and G.M. Pharr, J. Mater. Res. 7, 1564 (1992).
G.M. Pharr, W.C. Oliver, and F.R. Brotzen, J. Mater. Res. 7, 613 (1992).
J.B. Pethica, R. Hutchings., and W.C. Oliver, Philos. Mag. A 48, 593 (1983).
F. Frolich, P. Grau, and W. Grellmann, Phys. Status Solidi 42, 79 (1977).
D. Newey, M.A. Wilkins, and H.M. Pollock, J. Phys. E: Sci. Instrum. 15, 119 (1982).
G.M. Pharr and W.C. Oliver, MRS Bull. 17, 28 (1992).
G.M. Pharr, Mater. Sci. Eng. A 253, 151 (1998).
T.D. Shen, C.C. Koch, T.Y. Tsui, and G.M. Pharr, J. Mater. Res. 10, 2892 (1995).
D. Stone, W.R. LaFontaine, P. Alexopoulos, T.W. Wu, and C-Y. Li, J. Mater. Res. 3, 141 (1988).
W.D. Nix, Metall. Trans. 20A, 2217 (1989).
S.V. Hainsworth, H.W. Chandler, and T.F. Page, J. Mater. Res. 11, 1987 (1996).
M. Tabbal, P. Merel, M. Chaker, M.A. El Khakani, E.G. Herbert, B.N. Lucas, and M.E. O’Hern, J. Appl. Phys. 85, 3860 (1999).
S.V. Hainsworth, M.R. McGurk, and T.F. Page, Surf. Coat. Technol. 102, 97 (1998).
T.Y. Tsui and G.M. Pharr, J. Mater. Res. 14, 292 (1999).
T.Y. Tsui, J.J. Vlassak, and W.D. Nix, J. Mater. Res. 14, 2196 (1999).
S. Bec, A. Tonck, J-M. Georges, E. Georges, and J-L. Loubet, Philos. Mag. A 74, 1061 (1996).
N.X. Randall, Philos. Mag. A 82, 1883 (2002).
Y.Y. Lim and M.M. Chaudhri, J. Mater. Res. 14, 2314 (1999).
K. Miyahara, N. Nagashima, and S. Matsuoka, Philos. Mag. A 82, 2149 (2002).
R. Saha and W.D. Nix, Acta Mater. 50, 23 (2002).
J.A. Knapp, D.M. Follstaedt, S.M. Myers, J.C. Barbour, and T.A. Friedman, J. Appl. Phys. 85, 1460 (1999).
T.F. Page, G.M. Pharr, J.C. Hay, W.C. Oliver, B.N. Lucas, E. Herbert, and L. Riester, in Fundamentals of Nanoindentation and Nanotribology, edited by N.R. Moody, W.W. Gerberich, N. Burnham, and S.P. Baker (Mater. Res. Soc. Symp. Proc. 522, Warrendale, PA, 1998), p. 53.
J. Mencik, D. Munz, E. Quandt, E.R. Weppelmann, and M.V. Swain, J. Mater. Res. 12, 2475 (1997).
B.N. Lucas, W.C. Oliver, and J.E. Swindeman, in Fundamentals of Nanoindentation and Nanotribology, edited by N.R. Moody, W.W. Gerberich, N. Burnham, and S.P. Baker (Mater. Res. Soc. Symp. Proc. 522, Warrendale, PA, 1998), p. 3.
A. Bolshakov and G.M. Pharr, J. Mater. Res. 13, 1049 (1998).
J.C. Hay, A. Bolshakov, and G.M. Pharr, J. Mater. Res. 14, 2296 (1999).
T.A. Laursen and J.C. Simo, J. Mater. Res. 7, 618 (1992).
H. Gao, C-H. Chui, and J. Lee, Int. J. Solids Structures 29, 2471 (1992).
Y-T. Cheng and C-M. Cheng, J. Appl. Phys. 84, 1284 (1998).
Y-T. Cheng and C-M. Cheng, Int. J. Solids Structures 36, 1231 (1999).
Y-T. Cheng and C-M. Cheng, Appl. Phys. Lett. 73, 614 (1998).
P-L. Larsson, A.E. Giannakopoulos, E. Soderlund, D.J. Rowcliffe, and R. Vestergaard, Int. J. Solids Structures 33, 221 (1996).
S.D.J. Mesarovic and N.A. Fleck, Proc. R. Soc. London A 455, 2707 (1999).
B. Taljat, T. Zacharia, and G.M. Pharr, in Fundamentals of Nanoindentation and Nanotribology, edited by N.R. Moody, W.W. Gerberich, N. Burnham, and S.P. Baker (Mater. Res. Soc. Symp. Proc. 522, Warrendale, PA, 1998), p. 33.
G.M. Pharr and A. Bolshakov, J. Mater. Res. 17, 2660 (2002).
A. Bolshakov, W.C. Oliver, and G.M. Pharr, in Thin Films: Stresses and Mechanical Properties V, edited by S.P. Baker, C.A. Ross, P.H. Townsend, C.A. Volkert, and P. Børgesen (Mater. Res. Soc. Symp. Proc. 356, Pittsburgh, PA, 1995), p. 675.
K.W. McElhaney, J.J. Vlassak, and W.D. Nix, J. Mater. Res. 13, 1300 (1998).
J-L. Loubet, B.N. Lucas, and W.C. Oliver, NIST Special Publication 896: International Workshop on Instrumented Indentation (National Institute of Standards and Technology, San Diego, CA, 1995), pp. 31–34.
B.N. Lucas, C.T. Rosenmayer, and W.C. Oliver, in Thin Films— Stresses and Mechanical Properties VII, edited by R.C. Cammarata, M. Nastasi, E.P. Busso, and W.C. Oliver (Mater. Res. Soc. Symp. Proc. 505, Warrebdale, PA, 1998), p. 97.
W.H. Poisl, W.C. Oliver, and B.D. Fabes, J. Mater. Res. 10, 2024 (1995).
B.N. Lucas, W.C. Oliver, J-L. Loubet, and G.M. Pharr, in Thin Films: Stresses and Mechanical Properties VI, edited by W.W. Gerberich, H. Gao, J.E. Sundgren, and S.P. Baker (Mater. Res. Soc. Symp. Proc. 436, Pittsburgh, PA, 1997), p. 233.
B.N. Lucas and W.C. Oliver, Metall. Mater. Trans. 30A, 601 (1999).
M.F. Doerner and W.D. Nix, J. Mater. Res. 1, 601 (1986).
I.N. Sneddon, Int. J. Eng. Sci. 3, 47 (1965).
A.E.H. Love, Q.J. Math. 10, 161 (1939).
A.E.H. Love, Philos. Trans. A 228, 377 (1929).
J.W. Harding and I.N. Sneddon, Proc. Cambridge Phil. Soc. 41, 16 (1945).
I.N. Sneddon, Fourier Transforms (McGraw-Hill, New York, 1951), pp. 450–467.
J. Woirgard and J-C. Dargenton, J. Mater. Res. 12, 2455 (1997).
C-M. Cheng and Y-T. Cheng, Appl. Phys. Lett. 71, 2623 (1997).
H. Gao and T-W. Wu, J. Mater. Res. 8, 3229 (1993).
H. Hertz, Miscellaneous Papers by H. Hertz (Macmillan, London, 1896).
K.L. Johnson, Contact Mechanics (Cambridge University Press, Cambridge, 1985).
J.S. Field and M.V. Swain, J. Mater. Res. 8, 297 (1993).
J.S. Field and M.V. Swain, J. Mater. Res. 10, 101 (1995).
J.L. Hay, W.C. Oliver, A. Bolshakov, and G.M. Pharr, in Fundamentals of Nanoindentation and Nanotribology, edited by N.R. Moody, W.W. Gerberich, N. Burnham, and S.P. Baker (Mater. Res. Soc. Symp. Proc. 522, Warrendale, PA, 1998), p. 101.
J.L. Hay and G.M. Pharr, in ASM Handbook Volume 8: Mechanical Testing and Evaluation, 10th ed., edited by H. Kuhn and D. Medlin (ASM International, Materials Park, OH, 2000), pp. 232–243.
D. Tabor, The Hardness of Metals (Oxford University Press, London, 1951).
R.B. King, Int. J. Solids Struct. 23, 1657 (1987).
J.J. Vlassak and W.D. Nix, J. Mech. Phys. Solids, 42, 1223 (1994).
B.C. Hendrix, J. Mater. Res. 10, 255 (1995).
J.L. Loubet, J.M. Georges, O. Marchesini, and G. Meille, J. Tribology 106, 43 (1984).
D.L. Joslin and W.C. Oliver, J. Mater. Res. 5, 123 (1990).
D.S. Stone, K.B. Yoder, and W.D. Sproul, J. Vac. Sci. Technol. A 9, 2543 (1991).
J.B. Pethica and W.C. Oliver, Phys. Scr. 19, 61 (1987).
J.B. Pethica and W.C. Oliver, in Thin Films: Stresses and Mechanical Properties, edited by J.C. Bravman, W.D. Nix, D.M. Barnett, and D.A. Smith (Mater. Res. Soc. Symp. Proc. 130, Pittsburgh, PA, 1989), p. 13.
Author information
Authors and Affiliations
Additional information
This author was an editor of this focus issue during the review and decision stage. For the JMR policy on review and publication of manuscripts authored by editors, please refer to http://www.mrs.org/publications/jmr/policy.html
Rights and permissions
About this article
Cite this article
Oliver, W.C., Pharr, G.M. Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodology. Journal of Materials Research 19, 3–20 (2004). https://doi.org/10.1557/jmr.2004.19.1.3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1557/jmr.2004.19.1.3