p.975
p.979
p.983
p.987
p.991
p.995
p.999
p.1003
p.1007
Phase Stability of Zirconia and Alumina/Zirconia Composite Heads against UHMWPE Liners in a Temperature-Controlled Hip Simulation Study
Abstract:
This study evaluated the wear performance of cobalt-chromium, zirconia and alumina/zirconia composite heads against moderately crosslinked ultra-high-molecular-weight polyethylene liners under different temperature conditions. A temperature control unit was utilized to allow direct cooling/heating the head components at 4, 20, 37 and 45 °C in addition to the conventional no temperature control method. Results showed that the polyethylene wear was affected by the coolant temperature. The CoCrMo and the alumina/zirconia groups had similar wear rate without temperature control, however, the CoCrMo group generated 50% more wear than the alumina/zirconia group did when the coolant temperatures were above 20 °C. The zirconia group had the lowest wear rate of the three groups in all temperature conditions. The monoclinic phase content of the zirconia heads were about 0.2 M% before the test and 6.0 M% after the test, while the X-ray diffraction remained similar before and after the test in alumina/zirconia composite heads. The current study was able to reproduce the phase transformation of zirconia ceramics as reported in some clinical retrieval reports. A temperature control feature is recommended in a wear study in order to better simulate implant wear performance under the physiological condition in human body.
Info:
Periodical:
Pages:
991-994
Citation:
Online since:
April 2005
Authors:
Price:
Permissions: