Tape suture for stabilization of incomplete posterior pelvic ring fractures—biomechanical analysis of a new minimally invasive treatment for incomplete lateral compression pelvic ring fractures
verfasst von:
Christopher Alexander Becker, Adrian Cavalcanti Kussmaul, Eduardo Manuel Suero, Markus Regauer, Matthias Woiczinski, Christian Braun, Wilhelm Flatz, Oliver Pieske, Christian Kammerlander, Wolfgang Boecker, Axel Greiner
Incomplete lateral compression fractures (including AO Type B2.1) are among the most common pelvic ring injuries. Although the treatment of choice remains controversial, sacroiliac (SI) screws are commonly used for the operative treatment of incomplete lateral compression fractures of the pelvic ring. However, the disadvantages of SI screws include the risk of nerve root or blood vessel injury. Recently, tape sutures have been found useful as stabilizing material for the treatment of injuries of the syndesmosis, the rotator cuff and knee ligaments. In this current study, we aimed to test the biomechanical feasibility of tape sutures to stabilize the pelvis in the setting of AO Type B2.1 injury.
Methods
Six human cadaveric pelvises underwent cyclic loading to compare the biomechanical stability of different osteosynthesis methods in a B2.1 fracture model. The methods tested in this experiment were a FiberTape® suture and the currently established SI screw. A 3D ultrasound tracking system was used to measure fracture fragment motion. Linear regression was used to model displacement and stiffness at the posterior and anterior pelvic ring.
Results
At the posterior fracture site, the FiberTape® demonstrated similar displacement (2.2 ± 0.8 mm) and stiffness (52.2 ± 18.0 N/mm) compared to the sacroiliac screw (displacement 2.1 ± 0.6 mm, P > 0.999; stiffness 50.8 ± 13.0 N/mm, P > 0.999).
Considering the anterior fracture site, the FiberTape® again demonstrated similar displacement (3.8 ± 1.3 mm) and stiffness (29.5 ± 9.0 N/mm) compared to the sacroiliac screw (displacement 2.9 ± 0.8 mm, P = 0.2196; stiffness 37.5 ± 11.5 N/mm, P = 0.0711).
Conclusion
The newly presented osteosynthesis, the FiberTape®, shows promising results for the stabilization of the posterior pelvic ring in AO Type B2.1 lateral compression fractures compared to a sacroiliac screw osteosynthesis based on its minimal-invasiveness and the statistically similar biomechanical properties.
Hinweise
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Abkürzungen
3D
3-dimensional
AO
Arbeitsgemeinschaft Osteosynthese, Working Group Osteosynthesis
Fig.
Figure
FöFoLe
Förderprogramm für Forschung und Lehre, support program for research and teaching
GmbH
Gesellschaft mit beschränkter Haftung, private corporation with limited liability
No.
Number
qCT
Quantitative computed tomography
SD
Standard deviation
SI
Sacroiliac
TIFI
Transiliac internal fixator
Introduction
Fractures of the pelvic ring are frequently seen, especially in polytrauma patients or geriatric patients with poor bone quality [1‐3]. Incomplete lateral compression fractures (including AO Type B2.1) are among the most common pelvic ring injuries [4, 5]. The standard treatment of the incomplete lateral compression pelvic ring fracture is controversially discussed, ranging from conservative treatment to surgical care [5, 6]. As a standard concept, the sacroiliac screw (SI screw) fixation is part of the operative care and has shown sufficient biomechanical stability [7‐9]. But the disadvantages of this method include nerve root and/or blood vessel damage in case of misalignment of the screw [9, 10]. If two sacroiliac screws are used (S1 and S2), there is an even higher risk of damaging the nerve roots S1/S2 with the second S2-screw [11]. Furthermore, the necessity to compromise the intact sacroiliacal joint in the process of fixing the lateral sacral fracture is questionable. Regarding this problem, a variety of operating methods have been recently developed to stabilize sacral fractures [2, 9, 12, 13].
Recently, tape sutures have proven to be a stabilizing method for syndesmotic injuries in the ankle joint, for injuries to the rotator cuff of the shoulder or for ligamental knee injuries [14‐16]. Similar to the recently described transiliac internal fixator (TIFI), which is installed to the posterior superior iliac spine, one could insert a tape suture through this anatomical structure to minimal-invasively stabilize the posterior pelvic ring [12, 13, 17].
Anzeige
The disadvantage of the transiliac internal fixator lays in the possible disturbance of the soft tissue structures dorsal of the posterior superior iliac spine [17]. By using a tape suture one could possibly avoid this issue. Another advantage of a tape suture represents the higher flexibility of the tape compared to the rigidity of a screw. In ankle surgery, a tape suture performs a semi-rigid transfixation of the tibiofibular joint allowing micromotions in movement [18].
In this study, we assume that a tape suture will perform the semi-rigid transfixation of both sacroiliac joints. In addition, when inserting a tape suture in the posterior superior iliac spines, no relevant nerve structure is endangered.
For this reason, we performed a biomechanical analysis on 6 fresh frozen cadaver pelvises to analyze the stability of the tape suture applied to the posterior pelvic ring compared to a sacroiliac screw.
Material and methods
Material
A total of 6 human cadaver pelvises collected between January 2016 and April 2017 were used in this study with the approval of our institution’s ethics committee and the approval of the donors’ relatives given prior to the experiments. Only intact pelvises without any preexisting damage to the musculoskeletal structure, a tumor, or tuberculosis disease was included in this study. The characteristics of the pelvises are displayed in Table 1.
Table 1
Characteristics of the specimens
Pelvis
Age (years)
Sex
BMD (mg Ca-Ha/ml)
1
74
Male
104.6
2
72
Male
113.7
3
25
Male
151.7
4
67
Male
63.2
5
60
Male
121.6
6
65
Male
133.7
Mean
60.5 ± 18.1
114.8 ± 30.1
Median
66
117.7
Anzeige
Methods
Prior to any processing, the bone density of all pelvises was measured with a qCT scan using the fourth and fifth lumbar vertebrae (Table 1).
The pelvises were unfrozen 1 day prior to their experiment. On the day of the experiment, each pelvis was heated in a water bath at roughly 35 °C for 30 min in order to approximate body temperature.
Once heated, the tissue covering the spots needed to install the experiments equipment (Fig. 1a) was dissected; however, the dissection was kept as little as possible to preserve ligamental structures.
Fig. 1
a Positioning of the pelvis onto the testing rig. b FiberTape® spanning the posterior superior iliac spines
×
After the removal of the tissue, each pelvis was mounted on the testing machine and the 5-step protocol (Table 2) was applied. The first test served as a reference measurement of the intact pelvis (Trial 1: ‘reference’). Secondly, an AO type B2.1 fracture was created in accordance with the AO classification, consisting of a partial sacral fracture reaching from the superior margin of the sacrum until the height of the second sacral neuroforamen and of the anterior fracture consisting of an ipsilateral anterior pelvic ring fracture.
Table 2
Test protocol
Step 1
Loading up to 150 N
Step 2
Holding at 150 N for 30 s
Step 3
Periodic loading: 20 cycles with a frequency of 0.25 Hz between 150 N and 250 N
Step 4
Holding at 250 N for 135 s
Step 5
System back to its original position of + 28 mm
Next, the fixation methods were applied with the either tape suture (FiberTape 2 mm, Arthrex, Naples, FL, USA) spanning between both posterior superior iliac spines (Fig. 1b) or the 6.5 mm × 70 mm cannulated, partially threaded sacroiliac screw (DePuy Synthes, Umkirch, Germany) being inserted into the first sacral vertebrae (S1).
For the insertion of the tape suture (FiberTape®), two osseous channels were drilled through both posterior superior iliac spines, beginning from the fracture site using a high speed drill. The drill went through the contralateral posterior superior iliac spine from medial to lateral to achieve an osseous channel in the same direction as on the ipsilateral site. The FiberTape® was then threaded through the bony holes and a metal washer (DogBone®-Button, Arthrex, Naples, FL, USA) first on the contralateral site. Both ends were pulled back through the osseous channel with the tape consequently spanning between both iliac spines. The ipsilateral ends were then threaded through a second DogBone®-Button and manually surgically tied. Consequently, both metal washers were lying on the lateral sides of the osseous channels on each iliac spine (Fig. 1b).
For the S1 screw, the following technique was used. The S1 partially threaded screw was inserted under fluoroscopic control on the fractured site using the S1-corridor above the first neuroforamen, with at first drilling of a Kirschner-wire and secondly inserting the screw using the previously drilled K-wire.
Finally, the pelvises were set up in the testing machine.
Anzeige
Methods of assessment
In this study, we used an all-electric testing machine (Instron ElectroPulsTM E10000 Linear-Torsion, Norwood, MA 02062-2643, USA) and a 3D-ultrasound measuring system (Zebris CMS20, Gilching, Germany) for the recording of all data.
The ultrasound system consisted of 3 sensors that were placed onto the pelvis as seen in Fig. 1 and a transducer that was positioned 50 cm anteriorly to the pelvis. The unilateral embedding of the femur into a metal cylinder containing epoxide resin allowed the simulation of a single leg stance while the superior clamp dissembled a spherical joint.
For the conduction of the experiment, a 5-step protocol was applied according to McDonald et al. [19] (Table 2).
Every 30 ms, the position of all sensors was recorded, allowing the calculation of the relative distances between the sensors at any time. These distances were then used for the statistical analysis.
Anzeige
Statistical analysis
We used linear regression to model the magnitude of displacement between the fracture fragments representing the functionality of the stabilizing techniques used: native pelvis (reference), SI screw, and FiberTape®. Clustered standard errors were calculated using the Huber-White method. Pairwise comparisons were carried out using t tests. The Bonferroni method was used to adjust the P values for multiple comparisons. For all tests, α was set to 0.05. Descriptive statistics are presented as mean ± standard deviation (SD) wherever appropriate.
Results
At the posterior fracture site, the FiberTape® demonstrated similar displacement (2.2 ± 0.8 mm) and stiffness (52.2 ± 18.0 N/mm) compared to the sacroiliac screw (displacement 2.1 ± 0.6 mm, P > 0.999; stiffness 50.8 ± 13.0 N/mm, P > 0.999) (Table 3) (Fig. 2).
Table 3
Mean displacement and stiffness measurements for pelvic fractures fixed with either an SI screw or with FiberTape. The P value shown is for the difference between both groups
Reference
FiberTape®
Sacroiliac screw
P value
Mean displacement (mm)
Posterior
2.3 ± 0.5
3.2 ± 0.9
3.0 ± 0.5
> 0.999
Anterior
2.2 ± 0.4
4.5 ± 1.5
3.6 ± 0.6
0.2196
Mean stiffness (N/mm)
Posterior
44.2
31.7
32.8
> 0.999
Anterior
46.5
24.1
28.9
0.0711
Fig. 2
a, b Average displacement and stiffness measurements at the posterior fracture site
×
Considering the anterior fracture site, the FiberTape® again demonstrated similar displacement (3.8 ± 1.3 mm) and stiffness (29.5 ± 9.0 N/mm) compared to the sacroiliac screw (displacement 2.9 ± 0.8 mm, P = 0.2196; stiffness 37.5 ± 11.5 N/mm, P = 0.0711) (Table 3) (Fig. 3).
Fig. 3
a, b Average displacement and stiffness measurements at the anterior fracture site
×
Discussion
The treatment of incomplete posterior pelvic ring fractures (AO type B2.1) can be performed by various conservative and surgical procedures [20‐23]. However, conservative therapy shows significantly longer immobility and an increased level of pain [24]. The most frequently surgical method used is percutaneous sacroiliac screw fixation [20]. The advantages are the percutaneous approach with a short operation time and minimal soft tissue injury [20, 25‐27]. However, this type of osteosynthesis also has various risks. Due to the complex geometry of the pelvis, a high degree of expertise is required to ensure exact placement of the screw [28]. Osteosynthesis performed with conventional x-ray often show an insufficient representation of anatomical structures, especially in obese patients, in patients with intestinal gas overlay or when positioning a screw in the S2 segment. Thus, screw malposition can be seen in 2 to 68% of patients treated with S1/S2 screw fixation, whereas neurologic symptoms are seen in 0.5 to 7.9% [29, 30]. Methods such as plate osteosynthesis or internal fixation with pedicle screws have a significantly higher morbidity due to the open approach or often lead to irritation of the soft tissue, which can cause problems such as lesions of the skin or pain in the area of the iliac bone [23, 25].
Anzeige
Minimally invasive posterior tension banding with suture tape through the posterior superior iliac spines is a newly introduced method for stabilizing the posterior pelvic ring. This procedure is a minimally invasive fixation method with a sufficient posterior fracture stabilization without implanting any soft tissue disturbing components such as pedicle screw constructs. In addition, the extra-sacral position avoids an injury to the sacral nerve roots. Compared to SI screw fixation, tension banding does not compromise the intact SI joint. We assume that this semi-rigid fixation method also allows physiological mobility in the SI joint, so that removal of osteosynthesis implants is not necessary and there is no danger of stiffening of the joint. Positioning of the drill holes in the posterior superior iliac spine is usually easy to determine from the anatomical landmarks or to visualize in X-rays. This means that no special equipment such as 3D x-ray or navigation system is required to ensure correct positioning of the implants. We think that the radiation exposure and the surgical demands are also lower in this minimally invasive procedure compared to standard sacroiliac screw fixation.
Our biomechanical results showed no significant difference between screw fixation and minimally invasive posterior pelvic tension banding considering the dislocation of both the anterior and the posterior fracture gap under cyclic loading. Using the FiberTape®, the dislocation of the posterior pelvic ring was 0.2 mm higher (3.2 mm ± 0.9) than with the sacroiliac screw (3.0 mm ± 0.5), however not significantly. Considering the anterior pelvic fracture, the dislocation using the FiberTape® was 0.9 mm higher than the sacroiliac screw fixation, but again not significantly. With a resolution of the ultrasound measuring system of 0.1 mm, we showed that the stabilization of the posterior pelvic ring with a minimally invasive tension banding achieves a comparable stability as a sacroiliac screw. The effect of a higher dislocation of the anterior pelvic fracture as seen in the FiberTape® group could also be seen in conservatively treated pelvic fractures type B 2.1 without any problems in bone healing of the anterior pelvic ring in patients under 65 years [31]. We therefore assume that the slightly increased dislocation at the anterior pelvic ring using tape suture for posterior pelvic ring stabilization is not clinically relevant. The incomplete sacral fracture is good controlled with the extra-sacral implanted tape suture. But we think in higher unstable and dislocated fractures especially at the anterior pelvic ring and complete sacral fractures, the tape suture could not prevent opening of the anterior sacral fracture, as well as the anterior pelvic ring fracture. Thus we, think that our described method does work best in incomplete sacral fractures. Pain control in the sacral area is the most relevant clinical aim in incomplete posterior pelvic ring fracture or insufficiency fractures [32]. In our opinion, a tape suture on patients with incomplete posterior pelvic fracture could be a feasible minimally invasive treatment option for alleviating pain.
In the results presented here, we showed that the stabilization of the posterior pelvic ring was sufficiently achieved by minimally invasive dorsal tension using tape suture.
Conclusion
The newly presented osteosynthesis of the posterior superior iliac spine using FiberTape® shows promising results for the stabilization of the posterior pelvic ring in AO Type B2.1 lateral compression fractures of the pelvis when compared to sacroiliac screw osteosynthesis. Further advantages of the technique presented here are the lack of the necessity of implant removal, lower surgical demands, and lower risk of injury to relevant neural or vascular structures of the patient.
Acknowledgments
Thanks to Christoph Thorwächter for his kind help with the experimental setup and the evaluation of the results.
Ethics approval and consent to participate
The consent of our ethics committee and the donors’ relatives was given before the experiments.
Consent for publication
Consent for publication of the data was obtained from the relatives of the donors before the start of the study.
Competing interests
Markus Regauer reports personal fees from Arthrex, Naples, USA, outside the submitted work. Wolfgang Boecker reports personal fees from Lilly GmbH and from Amgen GmbH, outside the submitted work. The other authors declare that they have no competing interests.
Open AccessThis article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated.
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Tape suture for stabilization of incomplete posterior pelvic ring fractures—biomechanical analysis of a new minimally invasive treatment for incomplete lateral compression pelvic ring fractures
verfasst von
Christopher Alexander Becker Adrian Cavalcanti Kussmaul Eduardo Manuel Suero Markus Regauer Matthias Woiczinski Christian Braun Wilhelm Flatz Oliver Pieske Christian Kammerlander Wolfgang Boecker Axel Greiner
Zur Zementierung einer Knie-TEP wird in Deutschland zu über 98% Knochenzement verwendet, der mit einem Antibiotikum beladen ist. Ob er wirklich besser ist als Zement ohne Antibiotikum, kann laut Registerdaten bezweifelt werden.
In der Notaufnahme wird die Chance, Opfer von häuslicher Gewalt zu identifizieren, von Orthopäden und Orthopädinnen offenbar zu wenig genutzt. Darauf deuten die Ergebnisse einer Fragebogenstudie an der Sahlgrenska-Universität in Schweden hin.
Darüber reden und aus Fehlern lernen, sollte das Motto in der Medizin lauten. Und zwar nicht nur im Sinne der Patientensicherheit. Eine negative Fehlerkultur kann auch die Behandelnden ernsthaft krank machen, warnt Prof. Dr. Reinhard Strametz. Ein Plädoyer und ein Leitfaden für den offenen Umgang mit kritischen Ereignissen in Medizin und Pflege.
Ein Frauenanteil von mindestens einem Drittel im ärztlichen Op.-Team war in einer großen retrospektiven Studie aus Kanada mit einer signifikanten Reduktion der postoperativen Morbidität assoziiert.
Update Orthopädie und Unfallchirurgie
Bestellen Sie unseren Fach-Newsletter und bleiben Sie gut informiert.
