A novel three-in-one silicone model for basic microsurgery training

Simulation surgical training helps surgical trainees optimise their performance in the operating theatres while also providing a means for evaluation of their skills [1]. Microsurgery simulation is becoming an essential training method for acquisition and maintenance of microsurgical skills [2, 3]. While animal models have been extensively used in surgical training, there are some limitations with the use of animal models. There are ethical considerations with the use of living models, and this has resulted in a trend towards development of simulation models that can reduce reliance on animals in line with the 3R (refinement, reduction and replacement) principles [4‐6]. Moreover, although live animal models do confer great face validity, they require a dedicated animal care facility and trained staff. Thirdly, despite the high fidelity, there are still anatomical and physiological differences between human tissue and animal models. Finally, the high cost of surgical training resulted in development and spread of many non-living animal and synthetic models for microsurgery simulation [7]. The main advantage of using synthetic models in microsurgery training is that they can potentially be curated to exhibit with greater fidelity human tissue and to improve specific sub-tasks such as suturing skills or nerve damage repair. We published a design of a 5-day basic microsurgery simulation training course [8] in which we used synthetic models during the first day followed by non-living animal models (chicken) for the rest of the course.

The aim of this paper was to evaluate the face validity of Surgitate™ three-in-on silicone slab model that can serve as an animal-free alternative to be incorporated into early microsurgical training towards replacing, refining and reducing the use of animal models in microsurgery training.

We evaluated the face validity of a three-in-one (artery, vein and nerve) synthetic silicone slab model designed by a simulation company (Surgitate™) – (Fig. 1). One end-to-end anastomosis on artery, vein and nerve was performed using 10-0 sutures following training on chicken thigh models by 14 candidates from our Reconstructive Microsurgery MSc programme, Queen Mary University of London, at the Center of Biotechnology, Naples, Italy. The face validity of the vessel was assessed via questionnaires detailing previous microsurgical experience on human tissue, animal and synthetic models, their current level of surgical training, and their feedback of using this model using the Likert scale to evaluate validity of using the arterial, venous and nerve component of the model and to elicit comparisons with animal models.

As shown in Table 1, most participants were males (10/14, 71%) and had limited surgical training experience. For example, 57% of the participants had from less than 5 years of experience in microsurgery and spent less than 10 days in total in microsurgery simulation training sessions. Seventy-two percent of the participants performed a maximum of 10 microvascular procedures, and 62% performed microsurgical nerve repair independently in real clinical setting. The most commonly used microsurgery simulation training models were chicken (86%) and rats (living (71%) and non-living (57%)). Prior training with synthetic models was low (36%) reflecting the reluctance of surgical training programmes to incorporate synthetic models with questionable validity.

As Table 2 shows, most participants (93%) recommended using Surgitate model for basic microsurgery skills acquisition. A similar proportion of the participants felt that the model is an excellent training model to prepare them for performing microvascular and microneural repair on human tissue, and 57% of the participants felt that the model does not resemble microsurgical training in the real clinical setting. As seen in Table 3, participants who strongly recommended the slab model to be included in basic microsurgical training were significantly likely to report that they agree that the slab model provides good basic training in terms of acquisition and maintenance of microvascular and microneural repair skills as well as preparing them to the actual clinical setting. The correlations between recommending the slab model for microvascular and microneural repair skills acquisition and preparation for actual clinical setting were largely unaffected following the partial order correlation, whereas the perception that the slab model is adequate for maintenance of microsurgery skills was reduced.

In Table 4, compared to chicken models, the participants appreciated Surgitate model mainly for acquisition of microvascular suturing skills (79%) but less likely for training on tissue dissection (36%) or microvascular anastomosis (43%). Only 43% agreed that Surgitate model adequately resembles performing microsurgical procedures on live animal models.

Finally, there was a significant positive correlation (Table 5) between the participants’ feedback rating of the degree to which they regarded the slab model as a useful new model for microvascular and microneural anastomosis and the resemblance of the slab model to human tissue and animal models.

Alternative synthetic models have been introduced for microsurgery simulation training trying to comply with the 3R principles. Therefore, microsurgery simulation training nowadays usually begins teaching surgical trainees using low-fidelity synthetic models and progress and increase in complexity until it reaches a high-fidelity model such as living rat, which is the gold standard [7‐10]. These synthetic models include suture practice cards, rubber pads, bubble wrap, latex and vinyl gloves, silicone and polyvinyl alcohol gelatin tubes and many others [5, 10‐11]. Atlan et al. [12] believe that although most synthetic models are considered as low-fidelity models, however, they are easy to access, and they shorten learning curve and facilitate basic microsurgical skills acquisition. These basic skills include instrument handling, microscope positioning and suturing [15, 16].

Weber et al. [17] and Yen et al. [18] described a similar three-in-one model (PracticeRat) that allows nerve repair and arterial and venous anastomosis artery made of polyethylene tubes assembled in Petri dish. Although it is made of simple materials and it allows the trainee to check their vascular anastomosis patency, its cost is relatively high, and it does not offer realistic dissection of the surrounding tissues including the adventitia and is not a good model for practicing nerve repair.

Our study results demonstrate that Surgitate three-in-one silicone model could be a useful replacement to the use of animal models especially at basic stages of microsurgical simulation training. This model could be particularly useful in enhancing suturing skills as a replacement and a reduction in the use of chicken models. This model can be also suitable for performing microvascular anastomosis in end-to-end and end-to-side fashions and end-to-end anastomosis of vessels with size discrepancy and inter-positional graft, similar to the rat model described by Shurey et al [7]. It offers up to 18 different exercises on artery, vein and nerve, boxed in a model.

There were some drawbacks that preluded the utilisation of the slab model into more advanced stages of surgical training, primarily objections to the vein being too-thick walled, poor plasticity of the vessels as compared to animal model or human tissue and poor opposition of the intima. Moreover, most participants showed that there was a disparity between their surgical experience and the value of the use of this model for simulation training. The participants have also expressed that this model does not replicate true clinical scenarios such as a pulsatile vessel, easy-to-dissect adventitia and mimicking radiated or atherosclerotic vessels. These drawbacks are not insurmountable, and we have informed the manufacturer of these comments, and hopefully future developments of this slab model will take these design pitfalls into considerations to design a more clinically advanced microvascular training model. The cost of the slab model (around $150) exceeds that of the chicken and that is another limitation; however, we envision that the utility of this model is in its “boxable” nature where it could serve as a commercial proof of concept for demonstration of microsurgical techniques particularly suturing tools. Moreover, the model does offer potential advantages such as ethical replacement of animal models, no need for preservation and refrigeration which provides a permanent record for evaluation of performance. Thus, further studies are needed to evaluate its cost-effectiveness.

The study has some limitations, and these include small sample size and therefore lack of enough generalizability, and no pre-training model evaluation was sought from the participants to compare it with this post-training evaluation. However, the present study has some important strengths; for example, we provided a thorough evaluation of the model in terms of being useful for microsurgical skills acquisition and maintenance and preparation for actual clinical setting. We have also provided a comparison between this model and commonly used animal models in microsurgical training.

Future work should consider further model validation using hand motion analysis (HMA) and global rating scores (GRS) on standardised exercises as suggested by Ramachandran et al. [19]. For end-product assessment, the Anastomosis Lapse Index (ALI) score [3] can be used theoretically, but as the silicone walls would not fold, a similar analysis of errors to validate end-product assessment will be necessary.

We present a novel synthetic model that can be potentially introduced to early stages of microsurgery training that would be ideal to meet the 3R principles of the use of animals. We propose that this three-in-one synthetic silicone model for microvascular training is a useful beginner-level alternative to the commonly used synthetic and animal models.