Skip to main content
Erschienen in: Clinical Oral Investigations 2/2018

12.06.2017 | Original Article

Clinical evaluation of zirconia-based all-ceramic single crowns: an up to 12-year retrospective cohort study

verfasst von: Shoko Miura, Shin Kasahara, Shinobu Yamauchi, Yayoi Okuyama, Akio Izumida, Jun Aida, Hiroshi Egusa

Erschienen in: Clinical Oral Investigations | Ausgabe 2/2018

Einloggen, um Zugang zu erhalten

Abstract

Objectives

This study aims to investigate the incidence of clinical complications with tooth-supported zirconia-based all-ceramic single crowns and identify pertinent risk parameters.

Materials and methods

A retrospective cohort study (May 2004 to April 2016) utilizing clinical records of patients receiving yttrium-oxide–partially stabilized zirconia (Y-TZP)-based all-ceramic crowns placed at Tohoku University Hospital was performed. The length of time of treatment success (complication event-free) and restoration survival (including minor complication events and remaining clinically functional) were estimated using Kaplan–Meier analysis. Multilevel survival analysis was used to identify risk factors.

Results

One hundred thirty-seven crowns were evaluated (mean follow-up time, 7.0 years). A total of 21 crowns experienced at least one complication with fracture of veneering ceramic being the most common (16 crowns). Estimated success and survival rates at 5 years (96.9 and 98.5%, respectively) decreased at 10 years to 62.1 and 67.2%, respectively. The risk of complications was significantly higher for molar crowns compared to anterior crowns (p < 0.01). A significant association of complications with metal antagonist restorations was shown by univariate analysis (p < 0.01).

Conclusions

Given the study limitations, Y-TZP single crowns placed on anterior teeth demonstrated encouraging clinical results over a period of up to 10 years. However, there is a substantial risk of complications with posterior teeth within 10 years of restoration placement.

Clinical relevance

Treatment with zirconia-based all-ceramic crowns for molar teeth with metal antagonist occlusion should be undertaken with caution.
Literatur
1.
Zurück zum Zitat Raigrodski AJ, Chiche GJ (2001) The safety and efficacy of anterior ceramic fixed partial dentures: a review of the literature. J Prosthet Dent 86:520–525CrossRefPubMed Raigrodski AJ, Chiche GJ (2001) The safety and efficacy of anterior ceramic fixed partial dentures: a review of the literature. J Prosthet Dent 86:520–525CrossRefPubMed
2.
Zurück zum Zitat Walton TR (2013) The up to 25-year survival and clinical performance of 2,340 high gold-based metal-ceramic single crowns. Int J Prosthodont 26:151–160CrossRefPubMed Walton TR (2013) The up to 25-year survival and clinical performance of 2,340 high gold-based metal-ceramic single crowns. Int J Prosthodont 26:151–160CrossRefPubMed
3.
Zurück zum Zitat Ko N, Mine A, Egusa H, Shimazu T, Ko R, Nakano T, Yatani H (2014) Allergic reaction to titanium-made fixed dental restorations: a clinical report. J Prosthodont 23:501–303CrossRefPubMed Ko N, Mine A, Egusa H, Shimazu T, Ko R, Nakano T, Yatani H (2014) Allergic reaction to titanium-made fixed dental restorations: a clinical report. J Prosthodont 23:501–303CrossRefPubMed
4.
Zurück zum Zitat Hosoki M, Nishigawa K, Miyamoto Y, Ohe G, Matsuka Y (2016) Allergic contact dermatitis caused by titanium screws and dental implants. J Prosthodont Res 60:213–219CrossRefPubMed Hosoki M, Nishigawa K, Miyamoto Y, Ohe G, Matsuka Y (2016) Allergic contact dermatitis caused by titanium screws and dental implants. J Prosthodont Res 60:213–219CrossRefPubMed
5.
Zurück zum Zitat Sailer I, Makarov NA, Thoma DS, Zwahlen M, Pjetursson BE (2015) All-ceramic or metal-ceramic tooth-supported fixed dental prostheses (FDPS)? A systematic review of the survival and complication rates. Part I: single crowns (SCS). Dent Mater 31:603–623CrossRefPubMed Sailer I, Makarov NA, Thoma DS, Zwahlen M, Pjetursson BE (2015) All-ceramic or metal-ceramic tooth-supported fixed dental prostheses (FDPS)? A systematic review of the survival and complication rates. Part I: single crowns (SCS). Dent Mater 31:603–623CrossRefPubMed
7.
Zurück zum Zitat Li RW, Chow TW, Matinlinna JP (2014) Ceramic dental biomaterials and CAD/CAM technology: state of the art. J Prosthodont Res 58:208–216CrossRefPubMed Li RW, Chow TW, Matinlinna JP (2014) Ceramic dental biomaterials and CAD/CAM technology: state of the art. J Prosthodont Res 58:208–216CrossRefPubMed
8.
Zurück zum Zitat Alghazzawi TF (2016) Advancements in CAD/CAM technology: options for practical implementation. J Prosthodont Res 60:72–84CrossRefPubMed Alghazzawi TF (2016) Advancements in CAD/CAM technology: options for practical implementation. J Prosthodont Res 60:72–84CrossRefPubMed
9.
Zurück zum Zitat Miyazaki T, Nakamura T, Matsumura H, Ban S, Kobayashi T (2013) Current status of zirconia restoration. J Prosthodont Res 57:236–261CrossRefPubMed Miyazaki T, Nakamura T, Matsumura H, Ban S, Kobayashi T (2013) Current status of zirconia restoration. J Prosthodont Res 57:236–261CrossRefPubMed
10.
Zurück zum Zitat Ernst CP, Cohnen U, Stender E, Willershausen B (2005) In vitro retentive strength of zirconium oxide ceramic crowns using different luting agents. J Prosthet Dent 93:551–558CrossRefPubMed Ernst CP, Cohnen U, Stender E, Willershausen B (2005) In vitro retentive strength of zirconium oxide ceramic crowns using different luting agents. J Prosthet Dent 93:551–558CrossRefPubMed
11.
Zurück zum Zitat Raigrodski AJ, Chiche GJ, Potiket N, Hochstedler JL, Mohamed SE, Billiot S, Mercante DE (2006) The efficacy of posterior three-unit zirconium-oxide-based ceramic fixed partial dental prostheses: a prospective clinical pilot study. J Prosthet Dent 96:237–244CrossRefPubMed Raigrodski AJ, Chiche GJ, Potiket N, Hochstedler JL, Mohamed SE, Billiot S, Mercante DE (2006) The efficacy of posterior three-unit zirconium-oxide-based ceramic fixed partial dental prostheses: a prospective clinical pilot study. J Prosthet Dent 96:237–244CrossRefPubMed
12.
Zurück zum Zitat Kimmich M, Stappert CF (2013) Intraoral treatment of veneering porcelain chipping of fixed dental restorations: a review and clinical application. J Am Dent Assoc 144:31–44CrossRefPubMed Kimmich M, Stappert CF (2013) Intraoral treatment of veneering porcelain chipping of fixed dental restorations: a review and clinical application. J Am Dent Assoc 144:31–44CrossRefPubMed
13.
Zurück zum Zitat Rinke S, Schafer S, Lange K, Gersdorff N, Roediger M (2013) Practice-based clinical evaluation of metal-ceramic and zirconia molar crowns: 3-year results. J Oral Rehabil 40:228–237CrossRefPubMed Rinke S, Schafer S, Lange K, Gersdorff N, Roediger M (2013) Practice-based clinical evaluation of metal-ceramic and zirconia molar crowns: 3-year results. J Oral Rehabil 40:228–237CrossRefPubMed
14.
Zurück zum Zitat Sax C, Hammerle CH, Sailer I (2011) 10-year clinical outcomes of fixed dental prostheses with zirconia frameworks. Int J Comput Dent 14:183–202PubMed Sax C, Hammerle CH, Sailer I (2011) 10-year clinical outcomes of fixed dental prostheses with zirconia frameworks. Int J Comput Dent 14:183–202PubMed
15.
Zurück zum Zitat Gherlone E, Mandelli F, Cappare P, Pantaleo G, Traini T, Ferrini F (2014) A 3 years retrospective study of survival for zirconia-based single crowns fabricated from intraoral digital impressions. J Dent 42:1151–1155CrossRefPubMed Gherlone E, Mandelli F, Cappare P, Pantaleo G, Traini T, Ferrini F (2014) A 3 years retrospective study of survival for zirconia-based single crowns fabricated from intraoral digital impressions. J Dent 42:1151–1155CrossRefPubMed
16.
Zurück zum Zitat Guncu MB, Cakan U, Muhtarogullari M, Canay S (2015) Zirconia-based crowns up to 5 years in function: a retrospective clinical study and evaluation of prosthetic restorations and failures. Int J Prosthodont 28:152–157CrossRefPubMed Guncu MB, Cakan U, Muhtarogullari M, Canay S (2015) Zirconia-based crowns up to 5 years in function: a retrospective clinical study and evaluation of prosthetic restorations and failures. Int J Prosthodont 28:152–157CrossRefPubMed
17.
Zurück zum Zitat Monaco C, Caldari M, Scotti R, Agnini A, Barazzutti F, Bianchessi C, Biscaro L, Billi M, Boni M, Calesini G, Carboncini F, Cortellini D, Maglione M, Manicone PF, Micarelli C, Noe G, Poggio C, Risciotti E, Valenti M, Grp A (2015) Clinical evaluation of tooth-supported zirconia-based fixed dental prostheses: a retrospective cohort study from the AIOP clinical research group. Int J Prosthodont 28:236–238CrossRefPubMed Monaco C, Caldari M, Scotti R, Agnini A, Barazzutti F, Bianchessi C, Biscaro L, Billi M, Boni M, Calesini G, Carboncini F, Cortellini D, Maglione M, Manicone PF, Micarelli C, Noe G, Poggio C, Risciotti E, Valenti M, Grp A (2015) Clinical evaluation of tooth-supported zirconia-based fixed dental prostheses: a retrospective cohort study from the AIOP clinical research group. Int J Prosthodont 28:236–238CrossRefPubMed
18.
Zurück zum Zitat Koenig V, Vanheusden AJ, Le Goff SO, Mainjot AK (2013) Clinical risk factors related to failures with zirconia-based restorations: an up to 9-year retrospective study. J Dent 41:1164–1174CrossRefPubMed Koenig V, Vanheusden AJ, Le Goff SO, Mainjot AK (2013) Clinical risk factors related to failures with zirconia-based restorations: an up to 9-year retrospective study. J Dent 41:1164–1174CrossRefPubMed
19.
Zurück zum Zitat Poggio CE, Dosoli R, Ercoli C (2012) A retrospective analysis of 102 zirconia single crowns with knife-edge margins. J Prosthet Dent 107:316–321CrossRefPubMed Poggio CE, Dosoli R, Ercoli C (2012) A retrospective analysis of 102 zirconia single crowns with knife-edge margins. J Prosthet Dent 107:316–321CrossRefPubMed
20.
Zurück zum Zitat Monaco C, Caldari M, Scotti R, Agnini A, Barazzutti F, Bianchessi C, Biscaro L, Billi M, Boni F, Calesini G, Carboncini F, Cortellini D, Maglione M, Manicone PF, Micarelli C, Noe G, Poggio C, Risciotti E, Valenti M, Mascarella PD, Grp ACR (2013) Clinical evaluation of 1,132 zirconia-based single crowns: a retrospective cohort study from the AIOP clinical research group. Int J Prosthodont 26:435–442CrossRefPubMed Monaco C, Caldari M, Scotti R, Agnini A, Barazzutti F, Bianchessi C, Biscaro L, Billi M, Boni F, Calesini G, Carboncini F, Cortellini D, Maglione M, Manicone PF, Micarelli C, Noe G, Poggio C, Risciotti E, Valenti M, Mascarella PD, Grp ACR (2013) Clinical evaluation of 1,132 zirconia-based single crowns: a retrospective cohort study from the AIOP clinical research group. Int J Prosthodont 26:435–442CrossRefPubMed
21.
Zurück zum Zitat Rinke S, Kramer K, Burgers R, Roediger M (2016) A practice-based clinical evaluation of the survival and success of metal-ceramic and zirconia molar crowns: 5-year results. J Oral Rehabil 43:136–144CrossRefPubMed Rinke S, Kramer K, Burgers R, Roediger M (2016) A practice-based clinical evaluation of the survival and success of metal-ceramic and zirconia molar crowns: 5-year results. J Oral Rehabil 43:136–144CrossRefPubMed
22.
Zurück zum Zitat Passia N, Stampf S, Strub JR (2013) Five-year results of a prospective randomised controlled clinical trial of posterior computer-aided design-computer-aided manufacturing ZrSiO4–ceramic crowns. J Oral Rehabil 40:609–617CrossRefPubMed Passia N, Stampf S, Strub JR (2013) Five-year results of a prospective randomised controlled clinical trial of posterior computer-aided design-computer-aided manufacturing ZrSiO4–ceramic crowns. J Oral Rehabil 40:609–617CrossRefPubMed
23.
Zurück zum Zitat Aldegheishem A, Ioannidis G, Att W, Petridis H (2017) Success and survival of various types of all-ceramic single crowns: a critical review and analysis of studies with a mean follow-up of 5 years or longer. Int J Prosthodont 30:168–181CrossRefPubMed Aldegheishem A, Ioannidis G, Att W, Petridis H (2017) Success and survival of various types of all-ceramic single crowns: a critical review and analysis of studies with a mean follow-up of 5 years or longer. Int J Prosthodont 30:168–181CrossRefPubMed
24.
Zurück zum Zitat Hess DR (2004) Retrospective studies and chart reviews. Respir Care 49:1171–1174PubMed Hess DR (2004) Retrospective studies and chart reviews. Respir Care 49:1171–1174PubMed
25.
Zurück zum Zitat Nejatidanesh F, Moradpoor H, Savabi O (2016) Clinical outcomes of zirconia-based implant- and tooth-supported single crowns. Clin Oral Investig 20:169–178CrossRefPubMed Nejatidanesh F, Moradpoor H, Savabi O (2016) Clinical outcomes of zirconia-based implant- and tooth-supported single crowns. Clin Oral Investig 20:169–178CrossRefPubMed
26.
Zurück zum Zitat Takeichi T, Miura S, Kasahara S, Egusa H, Hara M, Sato T, Yoshinari M, Odatsu T, Watanabe I, Sawase T (2015) Update zirconia restorations. J Prosthodont Res 59:81–83CrossRefPubMed Takeichi T, Miura S, Kasahara S, Egusa H, Hara M, Sato T, Yoshinari M, Odatsu T, Watanabe I, Sawase T (2015) Update zirconia restorations. J Prosthodont Res 59:81–83CrossRefPubMed
27.
Zurück zum Zitat Tang X, Nakamura T, Usami H, Wakabayashi K, Yatani H (2012) Effects of multiple firings on the mechanical properties and microstructure of veneering ceramics for zirconia frameworks. J Dent 40:372–380CrossRefPubMed Tang X, Nakamura T, Usami H, Wakabayashi K, Yatani H (2012) Effects of multiple firings on the mechanical properties and microstructure of veneering ceramics for zirconia frameworks. J Dent 40:372–380CrossRefPubMed
28.
Zurück zum Zitat Heintze SD, Rousson V (2010) Survival of zirconia- and metal-supported fixed dental prostheses: a systematic review. Int J Prosthodont 23:493–502PubMed Heintze SD, Rousson V (2010) Survival of zirconia- and metal-supported fixed dental prostheses: a systematic review. Int J Prosthodont 23:493–502PubMed
29.
Zurück zum Zitat Tartaglia GM, Sidoti E, Sforza C (2015) Seven-year prospective clinical study on zirconia-based single crowns and fixed dental prostheses. Clin Oral Investig 19:1137–1145CrossRefPubMed Tartaglia GM, Sidoti E, Sforza C (2015) Seven-year prospective clinical study on zirconia-based single crowns and fixed dental prostheses. Clin Oral Investig 19:1137–1145CrossRefPubMed
30.
Zurück zum Zitat Haff A, Lof H, Gunne J, Sjogren G (2015) A retrospective evaluation of zirconia-fixed partial dentures in general practices: an up to 13-year study. Dent Mater 31:162–170CrossRefPubMed Haff A, Lof H, Gunne J, Sjogren G (2015) A retrospective evaluation of zirconia-fixed partial dentures in general practices: an up to 13-year study. Dent Mater 31:162–170CrossRefPubMed
31.
Zurück zum Zitat Chaar MS, Passia N, Kern M (2015) Ten-year clinical outcome of three-unit posterior FDPs made from a glass-infiltrated zirconia reinforced alumina ceramic (In-Ceram Zirconia). J Dent 43:512–517CrossRefPubMed Chaar MS, Passia N, Kern M (2015) Ten-year clinical outcome of three-unit posterior FDPs made from a glass-infiltrated zirconia reinforced alumina ceramic (In-Ceram Zirconia). J Dent 43:512–517CrossRefPubMed
32.
Zurück zum Zitat Ortorp A, Kihl ML, Carlsson GE (2009) A 3-year retrospective and clinical follow-up study of zirconia single crowns performed in a private practice. J Dent 37:731–736CrossRefPubMed Ortorp A, Kihl ML, Carlsson GE (2009) A 3-year retrospective and clinical follow-up study of zirconia single crowns performed in a private practice. J Dent 37:731–736CrossRefPubMed
33.
Zurück zum Zitat Larsson C, Wennerberg A (2014) The clinical success of zirconia-based crowns: a systematic review. Int J Prosthodont 27:33–43CrossRefPubMed Larsson C, Wennerberg A (2014) The clinical success of zirconia-based crowns: a systematic review. Int J Prosthodont 27:33–43CrossRefPubMed
34.
Zurück zum Zitat Ortorp A, Kihl ML, Carlsson GE (2012) A 5-year retrospective study of survival of zirconia single crowns fitted in a private clinical setting. J Dent 40:527–530CrossRefPubMed Ortorp A, Kihl ML, Carlsson GE (2012) A 5-year retrospective study of survival of zirconia single crowns fitted in a private clinical setting. J Dent 40:527–530CrossRefPubMed
35.
Zurück zum Zitat Tanaka S, Takaba M, Ishiura Y, Kamimura E, Baba K (2015) A 3-year follow-up of ceria-stabilized zirconia/alumina nanocomposite (Ce-TZP/A) frameworks for fixed dental prostheses. J Prosthodont Res 59:55–61 Tanaka S, Takaba M, Ishiura Y, Kamimura E, Baba K (2015) A 3-year follow-up of ceria-stabilized zirconia/alumina nanocomposite (Ce-TZP/A) frameworks for fixed dental prostheses. J Prosthodont Res 59:55–61
36.
Zurück zum Zitat Tanimoto Y (2015) Dental materials used for metal-free restorations: recent advances and future challenges. J Prosthodont Res 59:213–215CrossRefPubMed Tanimoto Y (2015) Dental materials used for metal-free restorations: recent advances and future challenges. J Prosthodont Res 59:213–215CrossRefPubMed
37.
Zurück zum Zitat Denry I, Kelly JR (2008) State of the art of zirconia for dental applications. Dent Mater 24:299–307CrossRefPubMed Denry I, Kelly JR (2008) State of the art of zirconia for dental applications. Dent Mater 24:299–307CrossRefPubMed
38.
Zurück zum Zitat Sailer I, Gottnerb J, Kanelb S, Hammerle CH (2009) Randomized controlled clinical trial of zirconia-ceramic and metal-ceramic posterior fixed dental prostheses: a 3-year follow-up. Int J Prosthodont 22:553–560PubMed Sailer I, Gottnerb J, Kanelb S, Hammerle CH (2009) Randomized controlled clinical trial of zirconia-ceramic and metal-ceramic posterior fixed dental prostheses: a 3-year follow-up. Int J Prosthodont 22:553–560PubMed
39.
Zurück zum Zitat Anusavice KJ (2012) Standardizing failure, success, and survival decisions in clinical studies of ceramic and metal-ceramic fixed dental prostheses. Dent Mater 28:102–111CrossRefPubMedPubMedCentral Anusavice KJ (2012) Standardizing failure, success, and survival decisions in clinical studies of ceramic and metal-ceramic fixed dental prostheses. Dent Mater 28:102–111CrossRefPubMedPubMedCentral
40.
Zurück zum Zitat Rosentritt M, Steiger D, Behr M, Handel G, Kolbeck C (2009) Influence of substructure design and spacer settings on the in vitro performance of molar zirconia crowns. J Dent 37:978–983CrossRefPubMed Rosentritt M, Steiger D, Behr M, Handel G, Kolbeck C (2009) Influence of substructure design and spacer settings on the in vitro performance of molar zirconia crowns. J Dent 37:978–983CrossRefPubMed
41.
Zurück zum Zitat Guess PC, Bonfante EA, Silva NR, Coelho PG, Thompson VP (2013) Effect of core design and veneering technique on damage and reliability of Y-TZP-supported crowns. Dent Mater 29:307–316CrossRefPubMed Guess PC, Bonfante EA, Silva NR, Coelho PG, Thompson VP (2013) Effect of core design and veneering technique on damage and reliability of Y-TZP-supported crowns. Dent Mater 29:307–316CrossRefPubMed
42.
Zurück zum Zitat Preis V, Letsch C, Handel G, Behr M, Schneider-Feyrer S, Rosentritt M (2013) Influence of substructure design, veneer application technique, and firing regime on the in vitro performance of molar zirconia crowns. Dent Mater 29:e113–e121CrossRefPubMed Preis V, Letsch C, Handel G, Behr M, Schneider-Feyrer S, Rosentritt M (2013) Influence of substructure design, veneer application technique, and firing regime on the in vitro performance of molar zirconia crowns. Dent Mater 29:e113–e121CrossRefPubMed
43.
Zurück zum Zitat Ferrari M, Sorrentino R, Cagidiaco C, Goracci C, Vichi A, Gherlone E, Zarone F (2015) Short-term clinical performance of zirconia single crowns with different framework designs: 3-year clinical trial. Am J Dent 28:235–240PubMed Ferrari M, Sorrentino R, Cagidiaco C, Goracci C, Vichi A, Gherlone E, Zarone F (2015) Short-term clinical performance of zirconia single crowns with different framework designs: 3-year clinical trial. Am J Dent 28:235–240PubMed
44.
Zurück zum Zitat Ferrari M, Giovannetti A, Carrabba M, Bonadeo G, Rengo C, Monticelli F, Vichi A (2014) Fracture resistance of three porcelain-layered CAD/CAM zirconia frame designs. Dent Mater 30:e163–e168CrossRefPubMed Ferrari M, Giovannetti A, Carrabba M, Bonadeo G, Rengo C, Monticelli F, Vichi A (2014) Fracture resistance of three porcelain-layered CAD/CAM zirconia frame designs. Dent Mater 30:e163–e168CrossRefPubMed
45.
Zurück zum Zitat Okabayashi S, Nomoto S, Sato T, Miho O (2013) Influence of proximal supportive design of zirconia framework on fracture load of veneering porcelain. Dent Mater J 32:572–577CrossRefPubMed Okabayashi S, Nomoto S, Sato T, Miho O (2013) Influence of proximal supportive design of zirconia framework on fracture load of veneering porcelain. Dent Mater J 32:572–577CrossRefPubMed
46.
Zurück zum Zitat Oilo M, Kvam K, Gjerdet NR (2016) Load at fracture of monolithic and bilayered zirconia crowns with and without a cervical zirconia collar. J Prosthet Dent 115:630–636CrossRefPubMed Oilo M, Kvam K, Gjerdet NR (2016) Load at fracture of monolithic and bilayered zirconia crowns with and without a cervical zirconia collar. J Prosthet Dent 115:630–636CrossRefPubMed
47.
Zurück zum Zitat Wolfart S, Harder S, Eschbach S, Lehmann F, Kern M (2009) Four-year clinical results of fixed dental prostheses with zirconia substructures (Cercon): end abutments vs. cantilever design. Eur J Oral Sci 117:741–749CrossRefPubMed Wolfart S, Harder S, Eschbach S, Lehmann F, Kern M (2009) Four-year clinical results of fixed dental prostheses with zirconia substructures (Cercon): end abutments vs. cantilever design. Eur J Oral Sci 117:741–749CrossRefPubMed
48.
Zurück zum Zitat Guazzato M, Walton TR, Franklin W, Davis G, Bohl C, Klineberg I (2010) Influence of thickness and cooling rate on development of spontaneous cracks in porcelain/zirconia structures. Aust Dent J 55:306–310CrossRefPubMed Guazzato M, Walton TR, Franklin W, Davis G, Bohl C, Klineberg I (2010) Influence of thickness and cooling rate on development of spontaneous cracks in porcelain/zirconia structures. Aust Dent J 55:306–310CrossRefPubMed
49.
Zurück zum Zitat Benetti P, Kelly JR, Della Bona A (2013) Analysis of thermal distributions in veneered zirconia and metal restorations during firing. Dent Mater 29:1166–1172CrossRefPubMed Benetti P, Kelly JR, Della Bona A (2013) Analysis of thermal distributions in veneered zirconia and metal restorations during firing. Dent Mater 29:1166–1172CrossRefPubMed
50.
Zurück zum Zitat Tholey MJ, Swain MV, Thiel N (2011) Thermal gradients and residual stresses in veneered Y-TZP frameworks. Dent Mater 27:1102–1110CrossRefPubMed Tholey MJ, Swain MV, Thiel N (2011) Thermal gradients and residual stresses in veneered Y-TZP frameworks. Dent Mater 27:1102–1110CrossRefPubMed
51.
Zurück zum Zitat Habib SR, Asiri W, Hefne MJ (2014) Effect of anatomic, semi-anatomic and non-anatomic occlusal surface tooth preparations on the adaptation of zirconia copings. J Adv Prosthodont 6:444–450CrossRefPubMedPubMedCentral Habib SR, Asiri W, Hefne MJ (2014) Effect of anatomic, semi-anatomic and non-anatomic occlusal surface tooth preparations on the adaptation of zirconia copings. J Adv Prosthodont 6:444–450CrossRefPubMedPubMedCentral
52.
Zurück zum Zitat Miura S, Inagaki R, Kasahara S, Yoda M (2014) Fit of zirconia all-ceramic crowns with different cervical margin designs, before and after porcelain firing and glazing. Dent Mater J 33:484–489CrossRefPubMed Miura S, Inagaki R, Kasahara S, Yoda M (2014) Fit of zirconia all-ceramic crowns with different cervical margin designs, before and after porcelain firing and glazing. Dent Mater J 33:484–489CrossRefPubMed
53.
Zurück zum Zitat Wang X, Fan D, Swain MV, Zhao K (2012) A systematic review of all-ceramic crowns: clinical fracture rates in relation to restored tooth type. Int J Prosthodont 25:441–450PubMed Wang X, Fan D, Swain MV, Zhao K (2012) A systematic review of all-ceramic crowns: clinical fracture rates in relation to restored tooth type. Int J Prosthodont 25:441–450PubMed
54.
Zurück zum Zitat Guncu MB, Cakan U, Aktas G, Guncu GN, Canay S (2016) Comparison of implant versus tooth-supported zirconia-based single crowns in a split-mouth design: a 4-year clinical follow-up study. Clin Oral Investig 20:2467–2473CrossRefPubMed Guncu MB, Cakan U, Aktas G, Guncu GN, Canay S (2016) Comparison of implant versus tooth-supported zirconia-based single crowns in a split-mouth design: a 4-year clinical follow-up study. Clin Oral Investig 20:2467–2473CrossRefPubMed
Metadaten
Titel
Clinical evaluation of zirconia-based all-ceramic single crowns: an up to 12-year retrospective cohort study
verfasst von
Shoko Miura
Shin Kasahara
Shinobu Yamauchi
Yayoi Okuyama
Akio Izumida
Jun Aida
Hiroshi Egusa
Publikationsdatum
12.06.2017
Verlag
Springer Berlin Heidelberg
Erschienen in
Clinical Oral Investigations / Ausgabe 2/2018
Print ISSN: 1432-6981
Elektronische ISSN: 1436-3771
DOI
https://doi.org/10.1007/s00784-017-2142-y

Weitere Artikel der Ausgabe 2/2018

Clinical Oral Investigations 2/2018 Zur Ausgabe

Newsletter

Bestellen Sie unseren kostenlosen Newsletter Update Zahnmedizin und bleiben Sie gut informiert – ganz bequem per eMail.