Skip to main content
Hauptrubriken
CME Facharzt-Training Webinare Zeitschriften Bücher e.Medpedia Podcast
Service
Jobbörse Info & Hilfe
Fachgebiete
Anästhesiologie Allgemeinmedizin Arbeitsmedizin Augenheilkunde Chirurgie Dermatologie Gynäkologie und Geburtshilfe HNO Innere Medizin Kardiologie Neurologie Onkologie und Hämatologie Orthopädie und Unfallchirurgie Pädiatrie Pathologie Psychiatrie Radiologie Rechtsmedizin Urologie Zahnmedizin
Themen
Klimawandel und Gesundheit Neues aus dem Markt COVID-19 Praxis und Beruf Seltene Erkrankungen GOÄ & EBM Panorama
Sammlungen
Kasuistiken Algorithmen & Infografiken Blickdiagnosen Arthropedia FlapFinder (für Dermatochirurgen) Videos Kongressberichterstattung Medizin für Apothekerinnen und Apotheker Für Ärztinnen und Ärzte in Weiterbildung Für Medizinstudierende

Klimawandel und Gesundheit: Was Sie in der Hausarztpraxis wissen müssen und tun können

Die Folgen des Klimwandels haben einen direkten Einfluss auf die Primärversorgung in Deutschland: Hitzeschutz insbesondere bei älteren Patienten, die Zunahme von Infektionen und die Verlängerung der Allergiesesaison spielen medizinisch eine bedeutsame Rolle. Aber auch in der Prävention und der Aufklärung der Patienten kommt den Hausärztinnen und -ärzten eine besondere Rolle zu. Direkt aus der Praxis berichtet im Live-Webinar am 13. Mai von 18 bis 19 Uhr unser Experte Dr. med. Robin Maitra.
Erweiterte Suche
Anmelden
nach oben
Clinical Oral Investigations
Erschienen in: Clinical Oral Investigations 4/2002

01.12.2002 | Review

All-ceramic crowns: bonding or cementing?

verfasst von: Peter Pospiech

Erschienen in: Clinical Oral Investigations | Ausgabe 4/2002

Einloggen, um Zugang zu erhalten

Abstract

Despite the wide variety of all-ceramic systems available today, the majority of dental practitioners hesitate to recommend and insert all-ceramic crowns. This article regards the nature of the ceramic materials, the principles of bonding and adhesion, and the clinical problems of the acid-etch technique for crowns. Advantages and disadvantages are discussed, and the influences of different factors on the strength of all-ceramic crowns are presented. Finally, the conclusion is drawn that conventional cementing of all-ceramic crowns is possible when the specific properties of the ceramics are taken into consideration.
Literatur
1.
Al Edris A, Al Jabr A, Cooley RL, Barghi N (1990) SEM evaluation of etch patterns by three etchants on three porcelains. J Prosthet Dent 64:734–739PubMed
2.
Al-Fawaz A, Gerzina TM, Hume WR (1993) Movement of resin cement components through acid-treated dentin during crown cementation in vitro. J Endod 19:219–223PubMed
3.
Anusavice KJ, Hojjatie B (1988) Influence of incisal length of ceramic and loading orientation on stress-distribution in ceramic crowns. J Dent Res 67:1371–1375PubMed
4.
Anusavice KJ, Hojjatie B (1992) Tensile stress in glass-ceramic crowns. Effect of flaws and cement voids. Int J Prosthodont 5:351–358PubMed
5.
Appeldoorn RE, Wilwerding TM, Barkmeier WM (1993) Bond strength of composite resin to porcelain with newer generation porcelain repair systems. J Prosthet Dent 70:6–11PubMed
6.
Bailey LF, Bennett RJ (1988) Dicor surface treatments for enhanced bonding. J Dent Res 67:925–931PubMed
7.
Bergenholtz G, Cox CF, Loesche WJ, Syed SA (1982) Bacterial leakage around dental restorations Its effect on the dental pulp. J Oral Pathol 11:439–450PubMed
8.
Bernal G, Jones RM, Brown DT, Munoz CA, Goodacre CJ (1993) The effect of finish line form and luting agent on the breaking strength of Dicor crowns. Int J Prosthodont 6:286–290PubMed
9.
Blunck U (2000) Adhesives principles and state of the art in adhesion. In: Roulet JF, Degrange M (eds) The silent revolution in dentistry. Quintessence, Chicago
10.
Breustedt A, Felgentreff K (1972) Silane als Haftvermittler zwischen dentalkeramischen Massen und Dentalkunststoffen und Möglichkeiten für Ihre Anwendung in der prothetischen Stomatologie. Teil 1. Theoretische Grundlagen. Dtsch Stomatol 22:676–683PubMed
11.
Breustedt A, Felgentreff K (1972) Silane als Haftvermittler zwischen dentalkeramischen Massen und Dentalkunststoffen und Möglichkeiten für Ihre Anwendung in der prothetischen Stomatologie. Teil 2. Experimentelle Untersuchungen. Dtsch Stomatol 22:825–834PubMed
12.
Burke FJT(1996) Fracture resistance of teeth restored with dentin bonded crowns: the effect of increased tooth preparation. Quint Int 27:115–121
13.
Burke FJT, Watts DC (1994) Fracture resistance of teeth restored with dentin-bonded crowns. Quint Int 25:335–340
14.
Burke FJT, Watts DC (1998) Effect of differing resin luting systems on fracture resistance of teeth restored with dentin-bonded crowns. Quint Int 29:21–27
15.
Campbell SD (1989) A comparative strength study of metal ceramic and all-ceramic esthetic materials. Modulus of rupture. J Prosthet Dent 62:476–479PubMed
16.
Carrier DD, Kelly JR (1995) In-Ceram failure behaviour and core-veneer interface quality as influenced by residual infiltration glass. J Prosthodont 4:237–242PubMed
17.
Casson AM, Glyn Jones JC, Youngson CC, Wood DJ (2001) The effect of luting media on the fracture resistance of a flame sprayed al-ceramic crown. J Dent 29:539–944CrossRefPubMed
18.
Chai J, Takahashi Y, Sulaiman F, Chong K, Lautenschlager EP (2000) Probability of fracture of all-ceramic crowns. Int J Prosthodont 13:420–424PubMed
19.
Chen HY, Hickel R, Setcos JC, Kunzelmann KH(1999) Effects of surface finish and fatigue testing on the fracture strength of CAD/CAM and pressed ceramic crowns. J Prosthet Dent 82:468–475PubMed
20.
Chu FCS, Frankel N, Smales RJ (2000) Surface roughness and flexural strength of self-glazed, polished and reglazed In-Ceram/VitaDur alpha porcelain laminates. Int J Prosthodont 13:66–71PubMed
21.
Ciucchi B, Bouillaguet S, Holz J, Pashley DH (1995) Dentinal fluid dynamics in human teeth, in vivo. J Endod 21:191–194PubMed
22.
Clark MT, Richards MW, Meiers JC(1995) Seating accuracy and fracture strength of vented and non-vented ceramic crowns luted with three cements. J Prosth Dent 74:18–24
23.
Crocker WP (1992) The cementation of porcelain jacket crowns with adhesive resins. Br Dent J 172:64–67PubMed
24.
Davidson C, de Gee A, Feilzer A (1993) The competition between the composite-dentin bond strength and the polymerization contraction stress. J Dent Res 63:1343–1345
25.
Doyle MG, Goodacre CJ, Munoz CA, Andres CJ (1990) The effect of tooth preparation design on the breaking strength of Dicor crowns. Part 3. Int J Prosthodont 3:327–340PubMed
26.
Doyle MG, Munoz CA, Goodacre CJ, Friedlander LD, Moore BK (1990) The effect of tooth preparation design on the breaking strength of Dicor crowns. Part 2. Int J Prosthodont 3:241–248PubMed
27.
Duffin JL, Bales DJ, Johnson GH (1989) Fracture resistance of castable ceramic crowns. J Dent Res:353, 429
28.
Dumfahrt H, Schäffer H (2000) Porcelain laminate veneers: a retrospective evaluation after 1 to 10 years of service. Part II. Clinical Results. Int J Prosthodont 13:9–18PubMed
29.
Edelhoff D, Horstkemper T, Richter E-J, Spiekermann H, Yildirim M (2000) Adhäsiv und konventionell befestigte Empress 1-Kronen. Dtsch Zahnärztl Z 55:326–330
30.
Eden GT, Kacicz JM (1987) Dicor strength improvement due to bonding. J Dent Res 66:207 #801
31.
Elhabashy A, Swift EJ, Boyer DB, Denehy GE (1993) Effects of dentin permeability and hydration on the bond strengths of dentin bonding systems. Am J Dent 6:123–126PubMed
32.
Eliades G (1994) Clinical relevance of the formulation and testing of dentin bonding agents. J Dent 22:73–81PubMed
33.
Engelmann J, Leyhausen G, Leibfritz D, Geursten W (2001) Metabolic effects of dental resin components in vitro detected by NMR spectroscopy. J Dent Res 80:869–875PubMed
34.
Erickson RL (1994) Oberflächeninteraktionen von Dentin-Adhäsivmaterialien. Phillip J 11:149–158
35.
Erpenstein H, Kerschbaum T (1991) Frakturrate von Dicorkronen unter klinischen Bedingungen. Dtsch Zahnärztl Z 46:14–128
36.
Erpenstein H, Kerschbaum T (1995) Frakturanfälligkeit von glas- und galvanokeramischen Kronen. Dtsch Zahnärztl Z 50:668–670
37.
Evans DB, O'Brien WJ (1999) Fracture strength of glass-infiltrated magnesia core porcelain. Int J Prosthodont 12:38–44PubMed
38.
Fenske C, Jarren MP, Sadat-Khonsari MR, Jüde H-D(1999) In-vitro-Untersuchung zur Bruchfestigkeit von IPS-Empress-Kronen in Abhängigkeit von der Stufenbreite. Dtsch Zahnärztl Z 54:732–734
39.
Fernandes CP, Chevitarese O (1991) The orientation and direction of rods in dental enamel. J Prosthet Dent 65:793–800PubMed
40.
Frankenberger R, Krämer N, Petschelt A (1999) Fatigue behaviour of different dentin adhesives. Clin Oral Invest 3:11–17CrossRef
41.
Friedl K-H, Powers JM, Hiller KA, Schmalz G (1995) Der Komposit-Dentinverbund nach Anwendung von Dentinadhäsiv-Systemen. Dtsch Zahnärztl Z 50:577–581
42.
Friedlander LD, Munoz CA, Goodacre CJ, Doyle MG, Moore BK (1990) The effect of tooth preparation design on the breaking strength of Dicor crowns. Part I. Int J Prosthodont 3:59–68PubMed
43.
Fuks AB, Cleaton-Jones P (1990) Pulp response to a composite resin inserted in deep cavities with and without surface seal. J Prosthet Dent 63:129–134PubMed
44.
Garberoglio R, Brannström M (1976) Scanning electron microscope investigation of human dentinal tubules. Arch of Oral Biol 21:355
45.
Gerstenberg K (1995) Wie sauber ist die gereinigte Klebfläche? Adhäsion 39:30–34
46.
Geurtsen W (2000) Biocompatibility of resin-modified filling materials. Crit Rev Oral Biol Med 11:333–355PubMed
47.
Geurtsen W (1998) Substances released from dental resin composites and glass ionomer cements. Eur J Oral Sci 106:687–695PubMed
48.
Geurtsen W, Leyhausen G (2001) Chemical-biological interactions of the resin monomer triethylenglycol-dimethacrylate (TEGDMA). J Dent Res 80:2046–2050PubMed
49.
Griffith AA (1920) The phenomena of rupture and flow in solids. Phil Trans Roy Soc Lond A 221:163
50.
Guggenberger R (1989) Das Rocatec-System Haftung durch tribochemische Beschichtung. Dtsch Zahnärztl Z 44:874–876
51.
Habenicht G (1990) Kleben. 2. Aufl. Springer, Berlin Heidelberg
52.
Haller B, Bischoff H (1994) Restaurationen aus Presskeramik. Quintessenz, Berlin
53.
Hanks CT, Wataha JC, Parsell RR, Strawn SE, Fat JC (1994) Permeability of biological and synthetic molecules through dentin. J Oral Rehab 21:475–487
54.
Höglund CH, van Dijken JW, Olofsson AL (1994) Three-year comparison of fired ceramic inlays cemented with composite resins or glass ionomer cement. Acta Odontol Scand 52:140–149PubMed
55.
Hojjatie B, Anusavice KJ (1990) Three dimensional finite element analysis of glass-ceramic dental crowns. J Biomech 23:1157–1166PubMed
56.
Holler G (1992) Kleben von Glas mit sich und anderen Werkstoffen. Adhäsion 36:20–24
57.
Hölsch W, Kappert HF (1992) Festigkeitsprüfungen von vollkeramischem Einzelzahnersatz für den Front- und Seitenzahnbereich. Dtsch Zahnärztl Z 612–623
58.
Houwink R, Salomon G (1965) Adhesion and adhesives. Elsevier, Amsterdam
59.
Jardel V, Degrange M, Picard B, Derrien G (1999) Surface energy of etched ceramic. Int J Prosthodont 19:415–418
60.
Jendresen MD, Glantz P-O (1981) Clinical adhesiveness of selected dental materials. Acta Odontol Scand 39:39–45PubMed
61.
Jendresen MD, Glantz P-O, Baier RE, Eick JD (1981) Microtopography and clinical adhesiveness of an acid etched tooth surface. Acta Odontol Scand 39:47–53PubMed
62.
Jung YG, Peterson IM, Pajares A, Lawn BR (1999) Contact damage resistance and strength degradation of glass-infiltrated alumina and spinel ceramics. J Dent Res 78:804–814PubMed
63.
Kamposiara P, Papabasilious G, Bayne S, Felton DA (1994) Finite element analysis estimates of cement microfracture under complete veneer crowns. J Prosthet Dent 71:435–441PubMed
64.
Kelly JR (1999) Clinically relevant approach to failure testing of all-ceramic restorations. J Prosthet Dent 81:652–661PubMed
65.
Kern M, Thompson VP (1994) Sandblasting and silica coating of a glass infiltrated alumina ceramic. Volume loss, morphology and changes in the surface composition. J Prosthet Dent 71:453–461PubMed
66.
Kern M, Wegner S (1998) Bonding to zirconia ceramics: adhesion methods and their durability. Dent Mater 14:64–71CrossRefPubMed
67.
Kheradmandan S (1999) Zur Eignung verschiedener Materialien für die Stumpfaufbauten mit konfektionierten Stiftsystemen unter vollkeramischen Kronen. Inaugural dissertation. LMU, Munich
68.
Lambrechts P, van Meerbeek B, Perdigao J, Vanherle G (2001) In: Wilson NHF, Roulet JF, Fuzzi M (eds) Adhesion in advances in operative dentistry. Vol 2. Quintessence, Chicago
69.
Lawn B (1993) Fracture of brittle solids. Cambridge University Press, Cambridge
70.
Lee SK, Wilson PR (2000) Fracture strength of all-ceramic crowns with varying core elastic moduli. Aust Dent J 45:103–107PubMed
71.
Leevailoj C, Platt JA, Cochran MA, Moore BK (1998) In vitro study of fracture incidence and compressive fracture load of all-ceramic crowns cemented with resin modified glass-ionomer and other luting cements. J Prosthet Dent 80:699–707PubMed
72.
Ludwig K, Joseph K (1994) Untersuchungen zur Bruchfestigkeit von IPS Empress Kronen in Abhängigkeit von den Zementiermodalitäten. Quint Zahntech 20:247–256
73.
Magne P, Douglas WH (1999) Porcelain veneers, dentin bonding optimization and biomimetic recovery of the crown. Int J Prosthodont 12:111–121PubMed
74.
Mak N, Qualtrough AJE, Burke FJT (1997) The effect of different ceramic materials on the fracture resistance of dentin-bonded crowns. Quint Int 28:197–203
75.
Malament KA, Socransky SS (2001) Survival of Dicor glass-ceramic dental restorations over 16 years. Part III. Effect of luting agent and tooth or tooth-substitute core structure. J Prosthet Dent 86:511–519CrossRefPubMed
76.
Manhart J, Hickel R (2001) Longevity of restorations. In: Wilson NHF, Roulet JF, Fuzzi M (eds) Advances in operative Dentistry. Vol 2. Quintessence, Chicago, pp 237–304
77.
Marquis PM (1989) Optimierung der Festigkeit von Vollkeramik-Jacketkronen. In: Preston JD (ed) Perspektiven der Dentalkeramik. Quintessenz, Berlin
78.
Martin N, Jedynakiewicz N (1998) Measurement of water sorption in dental composites. Biomaterials 19:77–83CrossRefPubMed
79.
Marx R (1993) Moderne keramische Werkstoffe für ästhetische Restaurationen. Verstärkung und Bruchzähigkeit. Dtsch Zahnärztl Z 48:229–236
80.
Mathis RS, Ferracane JL (1989) Properties of a glass-ionomer/resin-composite hybrid material. Dent Mater 5:355–358PubMed
81.
McCormick JT, Rowland W, Shillingburg HT Jr, Duncanson MG Jr (1993) Effect of luting media on the compressive strengths of two types of all-ceramic crowns. Quint Int 24:405–408
82.
Meier M, Fischer H, Richter E-J, Maier HR, Spiekermann H (1995) Einfluss unterschiedlicher Präparationsgeometrien auf die Bruchfestigkeit vollkeramischer Molarenkronen. Dtsch Zahnärztl Z 50:295–299
83.
Meyer JM, Cattani-Lorente MA, Dupuis V (1998) Compomers: between glass-ionomer cements and composites. Biomaterials 19:529–539CrossRefPubMed
84.
Miears JR, Charlton DG, Hermesch CB (1995) Effect of dentin moisture and storage time on resin bonding. Am J Dent 8:80–84PubMed
85.
Mörmann WH, Bindl A, Lüthy H, Rathke A (1998) Effects of preparation and luting system on all-ceramic computer-generated crowns. Int J Prosthodont 11:333–339PubMed
86.
Nakabayashi N, Pashley D(1998) Hybridization of dental hard tissues. Quintessence, Chicago
87.
Neiva G, Yaman P, Dennison JB, Razzoog ME, Lang BR (1998) Resistance to fracture of three all-ceramic systems. J Esthet Dent 10:60–66PubMed
88.
Ödmann P, Andersson B (2001) Procera AllCeram crowns followed for 5 to 105 years. A prospective clinical study. Int J Prosthodont 14:504–509PubMed
89.
Ohyama T, Yoshinari M, Oda Y (1999) Effects of cycling loading on the strength of all-ceramic materials. Int J Prosthodont 12:28–37PubMed
90.
Pashley DH (1985) Dentin-predentin complex and its permeability. Physiological overview. J Dent Res 64:613–620PubMed
91.
Pashley DH (1991) The clinical correlations of dentin structure and function. J Prosthet Dent 66:777–781PubMed
92.
Pashley EL, Tao L, Matthews WG, Pashley DH (1993) Bond strengths to superficial, intermediate and deep dentine in vivo with four dentin bonding systems. Dent Mater 9:2–6PubMed
93.
Pashley EL, Talman R, Horner JA, Pashley DH (1991) Permeability of normal versus carious dentin. Endod Dent Traumatol 7:207–211PubMed
94.
Passi P, Girardello GB, Vesentini A (1992) Resistance to fracture of ceramic jacket crowns. Quint Int 23:845–847
95.
Pedrini D, Gaetti-Jardim E Jr, de Vasconcelos AC (2001) Retention of oral microorganisms and resin-modified glass-ionomer cements. Pequi Odontol Bras 15:196–200
96.
Pereira PN, Okuda M, Sano H, Yoshikawa T Burrow MF, Tagami J (1999) Effect of intrinsic wetness and regional difference on dentin bonding strength. Dent Mater 15:46CrossRefPubMed
97.
Pospiech P (1999) Werkstoffkundliche und klinische Untersuchungen zur vollkeramischen Klebebrücke. Quintessenz, Berlin
98.
Pospiech P, Rammelsberg P, Gernet W (1992) Comparison of ceramic crowns strength using composite resin and zinc phosphate cement. J Dent Res 71:534
99.
Pospiech P, Rammelsberg P, Gernet W, Geymeier D (1992) Vergleichende Untersuchungen zur Druckscherfestigkeit von Mirage-, Dicor- und VMK-Kronen. Dtsch Zahnärztl Z 47:630–633
100.
Pospiech P, Rammelsberg P, Tichy H, Gernet W (1995) The suitability of compomers as a core material: investigation on volume stability. J Dent Res 74:#
101.
Pospiech P, Rammelsberg, P, Rosenboom, C, Gernet, W (1996) Der Einfluss des Befestigungssystems auf die Bruchfestigkeit von vollkeramischen Molarenkronen. Acta Med Dent Helv 1:177–186
102.
Pospiech P, Vangerow R, Rammelsberg P, Gernet W (1998) The influence of the surface treatment on the flexural strength of veneer porcelains. J Dent Res 77:2246
103.
Prati C, Nucci C, Montanari G (1991) Shear bond strength and microleakage of dentin bonding systems. J Prosthet Dent 65:401PubMed
104.
Qvist V, Staltze K, Qvist J (1989) Human pulp reactions to resin restorations performed with different acid-etch restorative procedures. Acta Odontol Scand 47:253–267PubMed
105.
Radlanski RJ (1997) Morphogenetic and morphological aspects of prism structure in human dental enamel. Acta Med Dent Helv :86–95
106.
Sallustio FW, Waskewicz GA, Billy EJ (1992) The effect of venting on the strength of Dicor and Hi-Ceram ceramic crowns. Int J Prosthodont 5:463–468PubMed
107.
Scherrer SS, DeRijk WG (1993) The fracture resistance of all-ceramic crowns on supporting structures with different elastic moduli. Int J Prosthodont 6:462–467PubMed
108.
Schmalz G (1998) The biocompatibility of non-amalgam dental filling materials. Eur J Oral Sci 106:696–708PubMed
109.
Schmalz G, Garhammer P, Schweikl H (1996) A commercially available cell culture device modified for dentin barrier tests. J Endodont 22:249–252
110.
Schmalz G, Hiller KA, Dörter-Aslan F (1994) New developments in the filter test system for cytotoxicity testing. J Mat Sci Mat Med 5:43–51
111.
Schröder HE (1987) Orale Strukturbiologie. Thieme, Stuttgart
112.
Schuhmacher G-H, Schmidt H, Börnig H, Richter W (1990) Anatomie und Biochemie der Zähne. 4. Aufl. VEB Verlag Volk und Gesundheit, Berlin
113.
Schweikl H, Schmalz G, Spruss T (2001) The induction of micronuclei in vitro by unpolymerized resin monomers. J Dent Res 80:1615–1620PubMed
114.
Segal BS (2001) Retrospective assessment of 546 all-ceramic anterior and posterior crowns in a general practice. J Prosthet Dent 85:644–650
115.
Shillingburg HT, Jacobi R, Brackett SE (1988) Grundlagen der Zahnpräparation. Quintessenz, Berlin
116.
Sidhu SS, Watson TF (1995) Resin-modified glass ionomer materials. Am J Dent 8:59–67PubMed
117.
Sindel J, Kunzelmann K-H (1993) Vergleich der Ätzbarkeit von Leuzit-Glaskeramiken. Dtsch Zahnärztl Z 48:478–480
118.
Sobrinho LC, Cattell MJ, Glover RH, Knowles JC (1998) Investigation of the dry and wet fatigue properties of three all-ceramic crown systems. Int J Prosthodont 11:255–262PubMed
119.
Thompson JY, Anusavice KJ (1994) Effect of surface etching on the flexure strength and fracture toughness of Dicor disks containing controlled flaws. J Dent Res 73:505–510PubMed
120.
Thonemann B, Federlin M, Schmalz G, Hiller KA (1995) Resin-modified glass ionomers for luting posterior ceramic restorations. Dent Mater 11:161–168PubMed
121.
Tsai Y-L, Petsche PE, Anusavice KJ, Yang MC (1998) Influence of glass-ceramic thickness on Hertzian and bulk fracture mechanisms. Int J Prothosd 18:27–32
122.
Tuntiprawon M, Wilson PR (1994) The effect of cement thickness on the fracture strength of all-ceramic crowns. Austr Dent J 40:17–21
123.
Van Meerbeek B, Inoue S, Perdigao J, Lambrechts P, Vanherle G (2001) Enamel and dentin adhesion. In: Summit JB, and others (eds) Fundamentals of operative dentistry. A contemporary approach. Quintessence, Chicago
124.
Wiederhorn SM (1972) A chemical interpretation of static fatigue. J Amer Ceram Soc 55:88
125.
Wiskott HW, Nicholls JJ, Belser UC (1996) The relationship between abutment taper and resistance of cemented crowns to dynamic loading. Int J Prosthodont 9:117–130PubMed
126.
Wolf DM, Powers JM, O'Keefe KL (1993) Bond strength of composite to etched and sandblasted porcelain. Am J Dent 6:155–158PubMed
127.
Yoshikawa T, Sano H, Burrow MF, Tagami J, Pashley DH (1999) Effects of dentin depths and cavity configuration on bond strength. J Dent Res 78:906PubMed
128.
Yoshinari M, Dérand T (1994) Fracture strength of all-ceramic crowns. Int J Prosthodont 7:329–338PubMed
129.
Yoshiyama M, Sano H, Ebisu S (1996) Regional strengths of bonding agents to cervical sclerotic root dentin. J Dent Res 75:1404–1413PubMed
130.
Zorll U (1978) Neue Erkenntnisse über die Bedeutung der Benetzung für die Adhäsion bei Beschichtungs- und Klebstoffen. Adhäsion 320–325
Metadaten
Titel
All-ceramic crowns: bonding or cementing?
verfasst von
Peter Pospiech
Publikationsdatum
01.12.2002
Verlag
Springer-Verlag
Erschienen in
Clinical Oral Investigations / Ausgabe 4/2002
Print ISSN: 1432-6981
Elektronische ISSN: 1436-3771
DOI
https://doi.org/10.1007/s00784-002-0183-2

Weitere Artikel der Ausgabe 4/2002

Clinical Oral Investigations 4/2002 Zur Ausgabe

Original Article

Correlations between bacterial levels in autologous subgingival plaque and saliva of adult Sudanese

Acknowledgement

Acknowledgement to referees

Original Article

Quantitative determination of salivary components in the pellicle on PMMA denture base material

Review

Conventional and adhesive luting cements

Original Article

Oral condition, chemistry of saliva, and salivary levels of Streptococcus mutans in thalassemic patients

Calendar of events

December 2002

Neu im Fachgebiet Zahnmedizin

Darf man die Behandlung eines Neonazis ablehnen?

08.05.2024 Gesellschaft Nachrichten

In einer Leseranfrage in der Zeitschrift Journal of the American Academy of Dermatology möchte ein anonymer Dermatologe bzw. eine anonyme Dermatologin wissen, ob er oder sie einen Patienten behandeln muss, der eine rassistische Tätowierung trägt.

Ein Drittel der jungen Ärztinnen und Ärzte erwägt abzuwandern

07.05.2024 Klinik aktuell Nachrichten

Extreme Arbeitsverdichtung und kaum Supervision: Dr. Andrea Martini, Sprecherin des Bündnisses Junge Ärztinnen und Ärzte (BJÄ) über den Frust des ärztlichen Nachwuchses und die Vorteile des Rucksack-Modells.

Endlich: Zi zeigt, mit welchen PVS Praxen zufrieden sind

IT für Ärzte Nachrichten

Darauf haben viele Praxen gewartet: Das Zi hat eine Liste von Praxisverwaltungssystemen veröffentlicht, die von Nutzern positiv bewertet werden. Eine gute Grundlage für wechselwillige Ärztinnen und Psychotherapeuten.

Parodontalbehandlung verbessert Prognose bei Katheterablation

19.04.2024 Vorhofflimmern Nachrichten

Werden Personen mit Vorhofflimmern in der Blanking-Periode nach einer Katheterablation gegen eine bestehende Parodontitis behandelt, verbessert dies die Erfolgsaussichten. Dafür sprechen die Resultate einer prospektiven Untersuchung.

Newsletter

Bestellen Sie unseren kostenlosen Newsletter Update Zahnmedizin und bleiben Sie gut informiert – ganz bequem per eMail.

Newsletter bestellen
Bildnachweise