nach oben

Erschienen in:

13.11.2018 | Original Article

The influence of enamel sandblasting on the shear bond strength and fractography of the bracket-adhesive-enamel complex tested in vitro by the DIN 13990:2017-04 standard

verfasst von: Nikolaos Daratsianos, Beke Schütz, Susanne Reimann, Anna Weber, Spyridon N. Papageorgiou, Andreas Jäger, Christoph Bourauel

Erschienen in: Clinical Oral Investigations | Ausgabe 7/2019

Einloggen, um Zugang zu erhalten

Abstract

Objectives

This study was conducted in order to investigate whether enamel sandblasting as an adjunct or substitute to the acid-etch technique has an effect on the shear bond strength (SBS) and fractography of the bracket-adhesive-enamel complex using the DIN 13990:2017-04 standard.

Materials and methods

Upper central incisor brackets (discovery®, Dentaurum, Germany) were bonded using Transbond XT™ (3M Unitek, Germany) on bovine incisors prepared by four different methods (15 samples each): sandblasting with 27 μm Al₂O₃ at 1.2 bar (s), acid etching with 37.4% phosphoric acid (a), sandblasting with 27 μm Al₂O₃ at 1.2 bar followed by acid etching (s1a), and sandblasting with 50 μm Al₂O₃ at 5.7 bar followed by acid etching (s2a). The SBS and adhesive remnant index (ARI) were measured, followed by one-way analysis of variance and Fisher’s exact tests at 5%.

Results

The SBS in groups s (5.6 ± 2.2 MPa), a (17.1 ± 4.3 MPa), s1a (18.3 ± 4.3 MPa), and s2a (18.5 ± 4.6 MPa) indicated that the s group was significantly inferior to all the other groups (p < 0.001). Likewise, the ARI analysis indicated a different performance of the s group (mostly ARI of 0) compared to the other groups (p < 0.001) and a tendency for different ARI between the a and s1a/s2a groups.

Conclusions

In vitro enamel sandblasting could not substitute acid etching and did not offer improved SBS when used before acid etching, regardless of air pressure and powder granulation. Sandblasting without acid etching produced less residual resin on the tooth after debonding.

Clinical relevance

The clinical use of adjunct enamel sandblasting prior to etching to enhance SBS has to be questioned.

Stasinopoulos D, Papageorgiou SN, Kirsch F et al (2018) Failure patterns of different bracket systems and their influence on treatment duration: a retrospective cohort study. Angle Orthod 88:081817–0559.1. https://doi.org/10.2319/081817-559.1 CrossRef

Ziebura T, Hohoff A, Flieger S, Stamm T (2014) Accidental debondings: buccal vs fully individualized lingual multibracket appliances. Am J Orthod Dentofac Orthop 145:649–654. https://doi.org/10.1016/j.ajodo.2013.12.030 CrossRef

Canay Ş, Kocadereli İ, Akça E (2000) The effect of enamel air abrasion on the retention of bonded metallic orthodontic brackets. Am J Orthod Dentofac Orthop 117:15–19. https://doi.org/10.1016/S0889-5406(00)70243-5 CrossRef

Wiechmann D (2000) Lingual orthodontics (part 3): intraoral sandblasting and indirect bonding. J Orofac Orthop 61:280–291CrossRef

Cal-Neto JP, Castro S, Moura PM, Ribeiro D, Miguel JAM (2011) Influence of enamel sandblasting prior to etching on shear bond strength of indirectly bonded lingual appliances. Angle Orthod 81:149–152. https://doi.org/10.2319/050210-237.1 CrossRefPubMed

Suma S, Anita G, Chandra Shekar BR, Kallury A (2012) The effect of air abrasion on the retention of metallic brackets bonded to fluorosed enamel surface. Indian J Dent Res 23:230–235. https://doi.org/10.4103/0970-9290.100432 CrossRefPubMed

Reicheneder C, Hofrichter B, Faltermeier A, Proff P, Lippold C, Kirschneck C (2014) Shear bond strength of different retainer wires and bonding adhesives in consideration of the pretreatment process. Head Face Med 10(51). https://doi.org/10.1186/1746-160X-10-51

Brosh T, Strouthou S, Sarne O (2005) Effects of buccal versus lingual surfaces, enamel conditioning procedures and storage duration on brackets debonding characteristics. J Dent 33:99–105. https://doi.org/10.1016/j.jdent.2004.08.005 CrossRefPubMed

Reisner KR, Levitt HL, Mante F (1997) Enamel preparation for orthodontic bonding: a comparison between the use of a sandblaster and current techniques. Am J Orthod Dentofac Orthop 111:366–373CrossRef

10.

Turkoz C, Ulusoy C (2012) Evaluation of different enamel conditioning techniques for orthodontic bonding. Korean J Orthod 42:32–38. https://doi.org/10.4041/kjod.2012.42.1.32 CrossRefPubMedPubMedCentral

11.

Pakshir HR, Zarif Najafi H, Hajipour S (2012) Effect of enamel surface treatment on the bond strength of metallic brackets in rebonding process. Eur J Orthod 34:773–777. https://doi.org/10.1093/ejo/cjr093 CrossRefPubMed

12.

Robles-Ruíz JJ, Ciamponi AL, Medeiros IS, Kanashiro LK (2014) Effect of lingual enamel sandblasting with aluminum oxide of different particle sizes in combination with phosphoric acid etching on indirect bonding of lingual brackets. Angle Orthod 84:1068–1073. https://doi.org/10.2319/120613-897.1 CrossRefPubMed

13.

Mati M, Amm E, Bouserhal J, Bassil-Nassif N (2012) Effects of buccal and lingual enamel sandblasting on shear bond strength of orthodontic brackets bonded with a self-etching primer. Int Orthod 10:422–431. https://doi.org/10.1016/j.ortho.2012.09.007 CrossRefPubMed

14.

Halpern RM, Rouleau T (2010) The effect of air abrasion preparation on the shear bond strength of an orthodontic bracket bonded to enamel. Eur J Orthod 32:224–227. https://doi.org/10.1093/ejo/cjp080 CrossRefPubMed

15.

Sargison AE, McCabe JF, Millett DT (1999) A laboratory investigation to compare enamel preparation by sandblasting or acid etching prior to bracket bonding. Br J Orthod 26:141–146CrossRef

16.

van Waveren Hogervorst WL, Feilzer AJ, Prahl-Andersen B (2000) The air-abrasion technique versus the conventional acid-etching technique: a quantification of surface enamel loss and a comparison of shear bond strength. Am J Orthod Dentofac Orthop 117:20–26CrossRef

17.

Sunna S, Rock WP (1998) Clinical performance of orthodontic brackets and adhesive systems: a randomized clinical trial. Br J Orthod 25:283–287CrossRef

18.

Cacciafesta V, Sfondrini MF, Scribante A (2004) Plasma arc versus halogen light-curing of adhesive-precoated orthodontic brackets: a 12-month clinical study of bond failures. Am J Orthod Dentofac Orthop 126:194–199. https://doi.org/10.1016/S0889540603010060 CrossRef

19.

Murfitt PG, Quick AN, Swain MV, Herbison GP (2006) A randomised clinical trial to investigate bond failure rates using a self-etching primer. Eur J Orthod 28:444–449. https://doi.org/10.1093/ejo/cjl007 CrossRefPubMed

20.

Thiyagarajah S, Spary DJ, Rock WP (2006) A clinical comparison of bracket bond failures in association with direct and indirect bonding. J Orthod 33:198–204. https://doi.org/10.1179/146531205225021615 CrossRefPubMed

21.

Elekdag-Turk S, Cakmak F, Isci D, Turk T (2008) 12-month self-ligating bracket failure rate with a self-etching primer. Angle Orthod 78:1095–1100. https://doi.org/10.2319/112507-552.1 CrossRefPubMed

22.

Patcas R, Zinelis S, Eliades G, Eliades T (2015) Surface and interfacial analysis of sandblasted and acid-etched enamel for bonding orthodontic adhesives. Am J Orthod Dentofac Orthop 147:S64–S75. https://doi.org/10.1016/j.ajodo.2015.01.014 CrossRef

23.

Roeters JJ (2000) A simple method to protect patient and environment when using sandblasting for intraoral repair. J Adhes Dent 2:235–238PubMed

24.

Mayer B, Raithel H, Weltle D, Niedermeier W (2003) Pulmonary risk of intraoral surface conditioning using crystalline silica. Int J Prosthodont 16:157–160PubMed

25.

DIN Deutsches Institut für Normung e. V. (2009) DIN 13990-2:2009-05, dentistry—test methods for shear bond strength of adhesives for orthodontic attachments—part 2: bonding of the entire bonding system attachment-adhesive-enamel

26.

DIN Deutsches Institut für Normung e. V. (2017) DIN 13990:2017-04, dentistry—test methods for shear bond strength of adhesives for orthodontic attachments

27.

Reimann S, Mezey J, Daratsianos N, Jäger A, Bourauel C (2012) The influence of adhesives and the base structure of metal brackets on shear bond strength. J Orofac Orthop / Fortschr Kieferorthop 73:184–193. https://doi.org/10.1007/s00056-012-0074-3 CrossRef

28.

Daratsianos N, Musabegovic E, Reimann S, Grüner M, Jäger A, Bourauel C (2013) The influence of cyclic shear fatigue on the bracket-adhesive-enamel complex: an in vitro study. Dent Mater 29:506–513. https://doi.org/10.1016/j.dental.2013.01.003 CrossRefPubMed

29.

Reimann S, Rewari A, Keilig L, Widu F, Jäger A, Bourauel C (2012) Material testing of reconditioned orthodontic brackets. J Orofac Orthop 73:454–466. https://doi.org/10.1007/s00056-012-0108-x CrossRefPubMed

30.

Zielinski V, Reimann S, Jäger A, Bourauel C (2014) Comparison of shear bond strength of plastic and ceramic brackets. J Orofac Orthop / Fortschr Kieferorthop 75:345–357. https://doi.org/10.1007/s00056-014-0236-6 CrossRef

31.

Jost-Brinkmann P-G, Richter C (2015) Shear bond strength of different adhesives tested in accordance with DIN 13990-1/-2 and using various methods of enamel conditioning. J Orofac Orthop / Fortschr Kieferorthop 76:175–187. https://doi.org/10.1007/s00056-014-0281-1 CrossRef

32.

Ebert T, Elsner L, Hirschfelder U, Hanke S (2016) Shear bond strength of brackets on restorative materials. J Orofac Orthop / Fortschr Kieferorthop 77:73–84. https://doi.org/10.1007/s00056-016-0011-y CrossRef

33.

Hofmann E, Elsner L, Hirschfelder U, Ebert T, Hanke S (2017) Effects of enamel sealing on shear bond strength and the adhesive remnant index. J Orofac Orthop / Fortschr Kieferorthop 78:1–10. https://doi.org/10.1007/s00056-016-0065-x CrossRef

34.

Faul F, Erdfelder E, Buchner A, Lang AG (2009) Statistical power analyses using G*Power 3.1: tests for correlation and regression analyses. Behav Res Methods 41:1149–1160. https://doi.org/10.3758/BRM.41.4.1149 CrossRefPubMed

35.

Artun J, Bergland S (1984) Clinical trials with crystal growth conditioning as an alternative to acid-etch enamel pretreatment. Am J Orthod 85:333–340CrossRef

36.

Stevens JR, Al Masud A, Suyundikov A (2017) A comparison of multiple testing adjustment methods with block-correlation positively-dependent tests. PLoS One 12:e0176124. https://doi.org/10.1371/journal.pone.0176124 CrossRefPubMedPubMedCentral

37.

Pickett KL, Sadowsky PL, Jacobson A, Lacefield W (2001) Orthodontic in vivo bond strength: comparison with in vitro results. Angle Orthod 71:141–148PubMed

38.

Proffit WR, Fields HW (1983) Occlusal forces in normal- and long-face children. J Dent Res 62:571–574CrossRef

39.

Proffit WR, Fields HW, Nixon WL (1983) Occlusal forces in normal- and long-face adults. J Dent Res 62:566–570CrossRef

40.

Yassen GH, Platt JA, Hara AT (2011) Bovine teeth as substitute for human teeth in dental research: a review of literature. J Oral Sci 53:273–282. https://doi.org/10.2334/josnusd.53.273 CrossRefPubMed

41.

Laurance-Young P, Bozec L, Gracia L, Rees G, Lippert F, Lynch RJM, Knowles JC (2011) A review of the structure of human and bovine dental hard tissues and their physicochemical behaviour in relation to erosive challenge and remineralisation. J Dent 39:266–272. https://doi.org/10.1016/j.jdent.2011.01.008 CrossRefPubMed

42.

Cavalli V, Giannini M, Carvalho RM (2004) Effect of carbamide peroxide bleaching agents on tensile strength of human enamel. Dent Mater 20:733–739. https://doi.org/10.1016/j.dental.2003.10.007 CrossRefPubMed

43.

Giannini M, Soares CJ, De Carvalho RM (2004) Ultimate tensile strength of tooth structures. Dent Mater 20:322–329. https://doi.org/10.1016/S0109-5641(03)00110-6 CrossRefPubMed

44.

Schütz B (2018) Einfluss von Sandstrahlen des Zahnschmelzes auf Scherhaftfestigkeit und Dauerlastverhalten kieferorthopädischer Bracket/Adhäsiv-Verbünde. Dissertation, Rheinische Friedrich-Wilhelms-Universität Bonn

Titel: The influence of enamel sandblasting on the shear bond strength and fractography of the bracket-adhesive-enamel complex tested in vitro by the DIN 13990:2017-04 standard
verfasst von: Nikolaos Daratsianos
Beke Schütz
Susanne Reimann
Anna Weber
Spyridon N. Papageorgiou
Andreas Jäger
Christoph Bourauel
Publikationsdatum: 13.11.2018
Verlag: Springer Berlin Heidelberg
Erschienen in: Clinical Oral Investigations / Ausgabe 7/2019
Print ISSN: 1432-6981
Elektronische ISSN: 1436-3771
DOI: https://doi.org/10.1007/s00784-018-2692-7

Neu im Fachgebiet Zahnmedizin

Endlich: Zi zeigt, mit welchen PVS Praxen zufrieden sind

IT für Ärzte Nachrichten

Darauf haben viele Praxen gewartet: Das Zi hat eine Liste von Praxisverwaltungssystemen veröffentlicht, die von Nutzern positiv bewertet werden. Eine gute Grundlage für wechselwillige Ärzte und Psychotherapeuten.

Parodontalbehandlung verbessert Prognose bei Katheterablation

19.04.2024 Vorhofflimmern Nachrichten

Werden Personen mit Vorhofflimmern in der Blanking-Periode nach einer Katheterablation gegen eine bestehende Parodontitis behandelt, verbessert dies die Erfolgsaussichten. Dafür sprechen die Resultate einer prospektiven Untersuchung.

Invasive Zahnbehandlung: Wann eine Antibiotikaprophylaxe vor infektiöser Endokarditis schützt

11.04.2024 Endokarditis Nachrichten

Bei welchen Personen eine Antibiotikaprophylaxe zur Prävention einer infektiösen Endokarditis nach invasiven zahnärztlichen Eingriffen sinnvoll ist, wird diskutiert. Neue Daten stehen im Einklang mit den europäischen Leitlinienempfehlungen.

Zell-Organisatoren unter Druck: Mechanismen des embryonalen Zahnwachstums aufgedeckt

08.04.2024 Zahnmedizin Nachrichten

Der Aufbau von Geweben und Organen während der Embryonalentwicklung wird von den Zellen bemerkenswert choreografiert. Für diesen Prozess braucht es spezielle sogenannte „Organisatoren“. In einer aktuellen Veröffentlichung im Fachjournal Nature Cell Biology berichten Forschende durch welchen Vorgang diese Organisatoren im Gewebe entstehen und wie sie dann die Bildung von Zähnen orchestrieren.

Bestellen Sie unseren kostenlosen Newsletter Update Zahnmedizin und bleiben Sie gut informiert – ganz bequem per eMail.

Newsletter bestellen

Live-Webinar "Chronische Unterbauch- und Viszeralschmerzen in der Praxis managen"

Springer Medizin

The influence of enamel sandblasting on the shear bond strength and fractography of the bracket-adhesive-enamel complex tested in vitro by the DIN 13990:2017-04 standard