nach oben

Current Oral Health Reports

Erschienen in:

01.06.2018 | Digital and Esthetic Dentistry (E Anadioti and P Stathopoulou, Section Editors)

Current and Emerging Applications of 3D Printing in Restorative Dentistry

verfasst von: Evanthia Anadioti, Brittany Kane, Elizabeth Soulas

Erschienen in: Current Oral Health Reports | Ausgabe 2/2018

Einloggen, um Zugang zu erhalten

Abstract

Purpose of Review

3D printing, or additive manufacturing, is an emerging technology in the dental field. As it continues to advance beyond diagnostic purposes, it shifts towards the fabrication of permanent prostheses utilizing existing and novel biomaterials. A review and comparison of the current research on materials, techniques, and applications of 3D printing available for restorative use was conducted.

Recent Findings

Currently, 3D printing used across the field of restorative dentistry, includes laboratory models and casting patterns, interim full and partial coverage restorations, surgical guides, occlusal splints, maxillofacial prosthetics, removable prostheses, and implants. Resins are most often used while ceramic and hybrid materials are currently under investigation and development.

Summary

While the current research available highlights 3D printing’s potential in the dental field, more research is needed on the existing and developing materials and printers, thus allowing for an exponential increase of this technology’s applications in restorative dentistry.

Guvendiren M, Molde J, Soares RMD, Kohn J, Soares RMD. Designing biomaterials for 3D printing. ACS Biomater Sci Eng. 2016;2(10):1679–93. https://doi.org/10.1021/acsbiomaterials.6b00121.CrossRefPubMedPubMedCentral

Dawood A, Marti BM, Sauret-Jackson V, Darwood A, Marti BM. 3D printing in dentistry. Br Dent J. 2015;219(11):521–9. https://doi.org/10.1038/sj.bdj.2015.914.CrossRefPubMed

Yap CY, Chua CK, Dong ZL, Liu ZH, Zhang DQ, Loh LE, et al. Review of selective laser melting: materials and applications. Appl Phys Rev. 2015;2(4):041101. https://doi.org/10.1063/1.4935926.

Mazzoli A. Selective laser sintering in biomedical engineering. Med Biol Eng Comput. 2013;51(3):245–56. https://doi.org/10.1007/s11517-012-1001-x.CrossRefPubMed

Derby B. Inkjet printing ceramics: from drops to solid. J Eur Ceram Soc. 2011;31(14):2543–50. https://doi.org/10.1016/j.jeurceramsoc.2011.01.016.

• Alharbi N, Wismeijer D, Osman RB. Additive manufacturing techniques in prosthodontics: where do we currently stand? A critical review. Int J Prosthodont. 2017;30(5):474–84. https://doi.org/10.11607/ijp.5079. Current review of the status of additive manufacturing and 3D printing in the field of prosthodontics, particularly the different printing techniques, the materials involved, and its applications.

Liaw CY, Guvendiren M. Current and emerging applications of 3D printing in medicine. Biofabrication 2017:9(2):5090/aa7279. Doi:https://doi.org/10.1088/1758-5090/aa7279.

Tack P, Victor J, Gemmel P, Annemans L, Tack P, Victor J, et al. 3D-printing techniques in a medical setting: a systematic literature review. Biomed Eng Online. 2016;15(1):115. https://doi.org/10.1186/s12938-016-0236-4.CrossRefPubMedPubMedCentral

Huang H, Hsieh MF, Zhang G, Ouyang H, Zeng C, Yan B, et al. Improved accuracy of 3D-printed navigational template during complicated tibial plateau fracture surgery. Australas Phys Eng Sci Med. 2015;38(1):109–17. https://doi.org/10.1007/s13246-015-0330-0.

10.

Hockaday LA, Kang KH, Colangelo NW, Cheung PY, Duan B, Malone E, et al. Rapid 3D printing of anatomically accurate and mechanically heterogeneous aortic valve hydrogel scaffolds. Biofabrication 2012:4(3):5082/4/3/035005. Epub 2012 Aug 23. https://doi.org/10.1088/1758-5082/4/3/035005.

11.

Shaheen E, Sun Y, Jacobs R, Politis C. Three-dimensional printed final occlusal splint for orthognathic surgery: design and validation. Int J Oral Maxillofac Surg 2017:46(1):67–71. Doi:S0901–5027(16)30275–2.

12.

Webb PA. A review of rapid prototyping (RP) techniques in the medical and biomedical sector. J Med Eng Technol. 2000;24(4):149–53. https://doi.org/10.1080/03091900050163427.CrossRefPubMed

13.

Sun J, Zhang FQ. The application of rapid prototyping in prosthodontics. J Prosthodont. 2012;21(8):641–4. https://doi.org/10.1111/j.1532-849X.2012.00888.x.CrossRefPubMed

14.

• Torabi K, Farjood E, Hamedani S. Rapid prototyping technologies and their applications in prosthodontics, a review of literature. J Dent. 2015;16(1):1–9. Thorough review summarizing the technical progress of 3D printing in dentistry, specifically outlining the types rapid prototyping and their applications in restorative dentistry and facial prosthetics.

15.

Fathi HM, Al-Masoody AH, El-Ghezawi N, Johnson A. The accuracy of fit of crowns made from wax patterns produced conventionally (hand formed) and via CAD/CAM Technology. Eur J Prosthodont Restor Dent. 2016;24(1):10–7. https://doi.org/10.1922/EJPRD_1444Fathi08. PubMed

16.

Anadioti E, Lee C, Schweitzer A. Fit of CAD/CAM tooth-supported single crowns and fixed dental prostheses. Curr Oral Health Rep. 2017;4(2):142–50. https://doi.org/10.1007/s40496-017-0139-x.CrossRef

17.

Brawek P, Wolfart S, Endres L, Kirsten A, Reich S. The clinical accuracy of single crowns exclusively fabricated by digital workflow—the comparison of two systems. Clin Oral Invest. 2013;17(9):2119–25. https://doi.org/10.1007/s00784-013-0923-5.CrossRef

18.

Su T, Sun J. Comparison of marginal and internal fit of 3-unit ceramic fixed dental prostheses made with either a conventional or digital impression. J Prosthet Dent. 2016;116(3):362–7. https://doi.org/10.1016/j.prosdent.2016.01.018.CrossRefPubMed

19.

Abduo J. Fit of CAD/CAM implant frameworks: a comprehensive review. J Oral Implantol. 2014;40(6):758–66. https://doi.org/10.1563/AAID-JOI-D-12-00117.CrossRefPubMed

20.

Abduo J, Lyons K, Bennamoun M. Trends in computer-aided manufacturing in prosthodontics: a review of the available streams. Int J Dent. 2014;2014:783948. https://doi.org/10.1155/2014/783948. CrossRefPubMedPubMedCentral

21.

Barazanchi A, Li KC, Al-Amleh B, Lyons K, Waddell JN. Additive technology: update on current materials and applications in dentistry. J Prosthodont. 2017;26(2):156–63. https://doi.org/10.1111/jopr.12510.CrossRefPubMed

22.

Bhargav A, Sanjairaj V, Rosa V, Feng LW, Fuh Yh J. Applications of additive manufacturing in dentistry: a review. J Biomed Mater Res B Appl Biomater. 2017; https://doi.org/10.1002/jbm.b.33961.

23.

Kenyon BJ, Hagge MS, Leknius C, Daniels WC, Weed ST. Dimensional accuracy of 7 die materials. J Prosthodont. 2005;14(1):25–31. https://doi.org/10.1111/j.1532-849X.2005.00007.x.CrossRefPubMed

24.

Hazeveld A, Huddleston Slater JJ, Ren Y. Accuracy and reproducibility of dental replica models reconstructed by different rapid prototyping techniques. Am J Orthod Dentofac Orthop. 2014;145(1):108–15. https://doi.org/10.1016/j.ajodo.2013.05.011.CrossRef

25.

Scherer M. Digital dental model production with high accuracy 3D printing. FormLabs White Paper. 2017;219:1–17. https://doi.org/10.1038/sj.bdj.2015.914.

26.

Homsy FR, Ozcan M, Khoury M, Majzoub ZAK. Marginal and internal fit of pressed lithium disilicate inlays fabricated with milling, 3D printing, and conventional technologies. J Prosthet Dent 2017. Doi:S0022–3913(17)30518–8.

27.

Eftekhar Ashtiani R, Nasiri Khanlar L, Mahshid M, Moshaverinia A. Comparison of dimensional accuracy of conventionally and digitally manufactured intracoronal restorations. J Prosthet Dent 2017. Doi:S0022–3913(17)30230–5.

28.

Bhaskaran E, Azhagarasan NS, Miglani S, Ilango T, Krishna GP, Gajapathi B. Comparative evaluation of marginal and internal gap of Co-Cr copings fabricated from conventional wax pattern, 3D printed resin pattern and DMLS tech: an in vitro study. J Indian Prosthodont Soc. 2013;13(3):189–95. https://doi.org/10.1007/s13191-013-0283-5. PubMedPubMedCentral

29.

Davda K, Osnes C, Dillon S, Wu J, Hyde P, Keeling A. An investigation into the trueness and precision of copy denture templates produced by rapid prototyping and conventional means. Eur J Prosthodont Restor Dent. 2017;25(4):186–92. https://doi.org/10.1922/EJPRD_01716Davda07.PubMed

30.

Chen H, Wang H, Lv P, Wang Y, Sun Y. Quantitative evaluation of tissue surface adaption of CAD-designed and 3D printed wax pattern of maxillary complete denture. Biomed Res Int. 2015;2015:453968. https://doi.org/10.1155/2015/453968. PubMedPubMedCentral

31.

Inokoshi M, Kanazawa M, Minakuchi S. Evaluation of a complete denture trial method applying rapid prototyping. Dent Mater J 2012:31(1):40–46. Doi:JST.JSTAGE/dmj/2011–113.

32.

Cheah CM, Chua CK, Tan KH. Integration of laser surface digitizing with CAD/CAM techniques for developing facial prostheses. Part 2: development of molding techniques for casting prosthetic parts. Int J Prosthodont. 2003;16(5):543–8.PubMed

33.

Tasopoulos T, Kouveliotis G, Polyzois G, Karathanasi V. Fabrication of a 3D printing definitive obturator prosthesis: a clinical report. Acta Stomatol Croat. 2017;51(1):53–8. https://doi.org/10.15644/asc51/1/7.CrossRefPubMedPubMedCentral

34.

Hu F, Pei Z, Wen Y. Using intraoral scanning technology for three-dimensional printing of Kennedy class I removable partial denture metal framework: a clinical report. J Prosthodont. 2017; https://doi.org/10.1111/jopr.12712.

35.

Williams RJ, Bibb R, Rafik TA. Technique for fabricating patterns for removable partial denture frameworks using digitized casts and electronic surveying. J Prosthet Dent. 2004;91(1):85–8. https://doi.org/10.1016/S0022391303006838. CrossRefPubMed

36.

Alifui-Segbaya F, Williams RJ, George R. Additive Manufacturing: A Novel Method For fabricating cobalt-chromium removable partial denture frameworks. Eur J Prosthodont Restor Dent. 2017;25(2):73–8. https://doi.org/10.1922/EJPRD_1598Alifui-Segbaya06. PubMed

37.

Revilla Leon M, Klemm IM, Garcia-Arranz J, Ozcan M. 3D metal printing—additive manufacturing technologies for frameworks of implant-borne fixed dental prosthesis. Eur J Prosthodont Restor Dent. 2017;25(3):143–7. https://doi.org/10.1922/EJPRD_RevillaLeon05. PubMed

38.

Hong DGK, Oh JH. Recent advances in dental implants. Maxillofac Plast Reconstr Surg. 2017;39(1):33. https://doi.org/10.1186/s40902-017-0132-2.CrossRefPubMedPubMedCentral

39.

Deeb GR, Allen RK, Hall VP, Whitley D, Laskin DM, Bencharit S. How accurate are implant surgical guides produced with Ddesktop stereolithographic 3-dimentional printers? J Oral Maxillofac Surg 2017:75(12):2559.e8. Doi:S0278–2391(17)31019–4.

40.

Chen J, Zhang Z, Chen X, Zhang C, Zhang G, Xu Z. Design and manufacture of customized dental implants by using reverse engineering and selective laser melting technology. The Journal of Prosthetic Dentistry 2014:112(5):1095e1 Doi: https://doi.org/10.1016/jprosdent2014.04.026.

41.

•• Tunchel S, Blay A, Kolerman R, Mijiritsky E, Shibli JA. 3D printing/additive manufacturing single titanium dental implants: a prospective multicenter study with 3 years of follow-up. Int J Dent. 2016;2016:8590971. https://doi.org/10.1155/2016/8590971.. Clinical study showing short-term success of 110 titanium single implants produced via additive manufacturing.

42.

Osman RB, van der Veen, A J, Huiberts D, Wismeijer D, Alharbi N 3D-printing zirconia implants: a dream or a reality? An in-vitro study evaluating the dimensional accuracy, surface topography and mechanical properties of printed zirconia implant and discs J Mech Behav Biomed Mater 2017:75:521–528 Doi: https://doi.org/10.1016/j.jmbbm.2017.08.018

43.

Cheng Y, Lin D, Jiang C, Lin Y. Dental implant customization using numerical optimization design and 3-dimensional printing fabrication of zirconia ceramic. Int J Numer Methods Biomed Eng 2017:33(5):n/a. Doi:https://doi.org/10.1002/cnm.2820.

44.

Christensen GJ. Marginal fit of gold inlay castings. J Prosthetic Dent. 1966;16(2):297–305.CrossRef

45.

• Ishida Y, Miyasaka T. Dimensional accuracy of dental casting patterns created by 3D printers. Dent Mater J. 2016;35(2):250–6. https://doi.org/10.4012/dmj.2015-278. In-vitro study that compares the quality of different printers.

46.

Salmi M, Paloheimo KS, Tuomi J, Ingman T, Makitie A. A digital process for additive manufacturing of occlusal splints: a clinical pilot study. J R Soc Interface. 2013;10(84):20130203. https://doi.org/10.1098/rsif.2013.0203.CrossRefPubMedPubMedCentral

47.

Mai HN, Lee KB, Lee DH. Fit of interim crowns fabricated using photopolymer-jetting 3D printing. J Prosthet Dent. 2017:118(2):208–215. Doi:S0022–3913(16)30613–8.

48.

Joo HS, Park SW, Yun KD, Lim HP. Complete-mouth rehabilitation using a 3D printing technique and the CAD/CAM double scanning method: a clinical report. J Prosthet Dent. 2016;116(1):3–7. https://doi.org/10.1016/j.prosdent.2016.01.007.CrossRefPubMed

49.

Tahayeri A, Morgan M, Fugolin AP, Bompolaki D, Athirasala A, Pfeifer CS, et al. 3D printed versus conventionally cured provisional crown and bridge dental materials. Dent Mater 2017. Doi:S0109–5641(17)30447–5.

50.

Lee WS, Lee DH, Lee KB. Evaluation of internal fit of interim crown fabricated with CAD/CAM milling and 3D printing system. J Adv Prosthodont. 2017;9(4):265–70. https://doi.org/10.4047/jap.2017.9.4.265.CrossRefPubMedPubMedCentral

51.

Alharbi N, Alharbi S, Cuijpers VMJI, Osman RB, Wismeijer D. Three-dimensional evaluation of marginal and internal fit of 3D-printed interim restorations fabricated on different finish line designs. J Prosthodont Res 2017. Doi:S1883–1958(17)30106–8.

52.

Yue J, Zhao P, Gerasimov JY, van de Lagemaat M, Grotenhuis A, Rustema-Abbing M, et al. 3D-Printable Antimicrobial Composite Resins. Adv Funct Mater. 2015;25(43):6756–67. https://doi.org/10.1002/adfm.201502384.

53.

Silva NRFA, Witek L, Coelho PG, Thompson VP, Rekow ED, Smay J. Additive CAD/CAM process for dental prostheses. J Prosthodont. 2011;20(2):93–6. https://doi.org/10.1111/j.1532-849X.2010.00623.x.CrossRefPubMed

54.

Ebert J, Özkol E, Zeichner A, Uibel K, Weiss Ö, Koops U, et al. Direct inkjet printing of dental prostheses made of zirconia. J Dent Res. 2009;88(7):673–6. https://doi.org/10.1177/0022034509339988.

55.

Anja MW, Gingter P, Kramer M, Telle R. Novel prospects and possibilities in additive manufacturing of ceramics by means of direct inkjet printing. Adv Mech Eng. 2014;6:141346. https://doi.org/10.1155/2014/141346.CrossRef

56.

Denry I, Kelly JR. Emerging ceramic-based materials for dentistry. J Dent Res. 2014;93(12):1235–42. https://doi.org/10.1177/0022034514553627.CrossRefPubMedPubMedCentral

57.

Ahn BY, Shoji D, Hansen CJ, Hong E, Dunand DC, Lewis JA. Printed origami structures. Adv Mater. 2010;22(20):2251–4. https://doi.org/10.1002/adma.200904232.CrossRefPubMed

58.

Muth JT, Dixon PG, Woish L, Gibson LJ, Lewis JA. Architected cellular ceramics with tailored stiffness via direct foam writing. Proc Natl Acad Sci U S A. 2017;114(8):1832–7. https://doi.org/10.1073/pnas.1616769114.CrossRefPubMedPubMedCentral

59.

Yun JS, Park T, Jeong YH, Cho JH. Development of ceramic-reinforced photopolymers for SLA 3D printing technology. Appl Phys A. 2016;122(6):629. https://doi.org/10.1007/s00339-016-0157-x.CrossRef

60.

Eckel ZC, Zhou C, Martin JH, Jacobsen AJ, Carter WB, Schaedler TA. Additive manufacturing of polymer-derived ceramics. Science. 2016;351(6268):58–62. https://doi.org/10.1126/science.aad2688.CrossRefPubMed

Titel: Current and Emerging Applications of 3D Printing in Restorative Dentistry
verfasst von: Evanthia Anadioti
Brittany Kane
Elizabeth Soulas
Publikationsdatum: 01.06.2018
Verlag: Springer International Publishing
Erschienen in: Current Oral Health Reports / Ausgabe 2/2018
Elektronische ISSN: 2196-3002
DOI: https://doi.org/10.1007/s40496-018-0181-3

Bestellen Sie unseren kostenlosen Newsletter Update Zahnmedizin und bleiben Sie gut informiert – ganz bequem per eMail.

Newsletter bestellen

Springer Medizin

Current and Emerging Applications of 3D Printing in Restorative Dentistry