Simple rapid in vitro screening method for SARS-CoV-2 anti-virals that identifies potential cytomorbidity-associated false positives

The global SARS-CoV-2 pandemic has resulted in widespread activities seeking to identify new anti-viral drugs that might be used to treat COVID-19 patients [1‐5]. Remdesivir has emerged as a lead candidate with clear anti-viral activity in vitro [6] and non-human primates [7], with results in human trials suggesting benefit, although mortality remained high [8, 9]. The quest for new anti-viral drugs for SARS-CoV-2 (as for other viruses) usually begins with in vitro screening to identify potential candidates [10‐12]. Initial screening usually involves assessing whether drugs can inhibit virus replication in a permissive cell line, with Vero E6 cells widely used for SARS-CoV-2. Such in vitro screening approaches often identify drugs that work well in vitro, but ultimately fail to have anti-viral activity in vivo. For example, chloroquine/hydroxychloroquine inhibits SARS-CoV-2 replication in vitro [6, 13, 14], but the drug ultimately emerged to have no utility in COVID-19 patients [15‐17]. Chloroquine/hydroxychloroquine was similarly shown to have in vitro antiviral activity, but no anti-viral activity in humans for a number of viruses including Epstein Barr virus (infectious mononucleosis) [18], dengue [19], HIV [20], chikungunya [21], Ebola [22] and influenza [23].

Although there are multiple reasons why in vitro anti-viral activity often does not translate into in vivo efficacy, one reason for false positives from in vitro screening assays is the misapplication of the therapeutic index concept as it applies to tissue culture-based anti-viral drug discovery, where this index is generally referred to as the selectivity index. The concentration of a drug that inhibits virus replication is often compared to the concentration that kills the cells (cytotoxicity). The MTS assay is also often used as a cytotoxicity or viability assay, although it actually measures mitochondrial activity. Differences in conclusions from MTS and other cytotoxicity assays are common [24], leading some to suggest complex combined cytotoxicity assays [25], which are not readily compatible with rapid screening under BSL3 containment conditions [26]. Viral replication would clearly be inhibited in cells that are not viable; however, what is perhaps under-appreciated is that viable, but stressed or otherwise slightly poisoned or compromised cells, are also likely to have a reduced capacity to replicate virus. Cellular stress responses can take multiple forms, but a key outcome of most stress responses is inhibition of translation [27‐31]. Translational inhibition is also a key anti-viral response, which is able to inhibit replication of many viruses [27, 30, 32] including coronaviruses [33]. A drug that has no specific anti-viral activity, but induces cellular stress, may therefore inhibit virus replication non-specifically and generate a potential false positive in screening assays. We coin the term “cytomorbidity” to describe this phenomenon and describe herein a simple growth assay that can be used to distinguish cytomorbidity from cytotoxicity, and argue that both cytomorbidity and cytotoxicity controls are needed to increase the reliability and stringency of in vitro drug screening assays.

A key outcome of stress responses is usually to slow cell growth, allowing the cell to either recover, or if stress and/or damage is excessive, to induce cell death [34‐36]. Cells that are slightly poisoned or otherwise compromised (without induction of stress responses) would likely also show reduced growth rates. Cell growth of Vero E6 cells can be very simply measured by seeding 400 cells per well in 96 well flat bottom plates and culturing with a range of drug concentrations for 4 days followed by crystal violet staining. Vero E6 cells (C1008, ECACC, Wiltshire, England; Sigma Aldrich, St. Louis, MO, USA) were plated at 4 × 10² (cytomorbidity assay) or 10⁴ (anti-viral screening, cytotoxicity assay and MTS assay) cells per well in a 96 well plate in 100 µl medium and cultured overnight at 37 °C and 5% CO₂. The drug (at 4 times the indicated final concentration) was diluted in twofold serial dilutions in RPMI 1640 supplemented with 2% FCS in a 96 well round bottom plate, and 50 µl was then transferred to cells using a multichannel pipette. For anti-viral screening assay, SARS-CoV-2 (hCoV-19/Australia/QLD02/2020 [37], kindly provided by Queensland Health Forensic and Scientific Services, Queensland Department of Health, Brisbane, Australia) was diluted in RPMI 1640 supplemented with 2% FCS to a final concentration of 2 × 10³ CCID₅₀/ml and 50 µl was added per well using a multichannel pipette for a final MOI ~ 0.01. For cytomorbidity or cytotoxicity assay, 50 µl RPMI 1640 supplemented with 2% FCS (instead of virus) was then added per well to give a final volume of 200 µl at the desired drug concentration. The plates were cultured for 4 days at 37 °C and 5% CO₂. To inactivate virus and stain the cells, 50 µl of formaldehyde (15% w/v) and crystal violet (0.1% w/v) (Sigma-Aldrich) was added per well to the 200 µl of medium already present in each well. After washing and drying, stain was dissolved in 100% methanol and the OD was read at 595 nm. The percentage of protein staining relative to a no-drug control was then calculated. The MTS assay was performed in duplicate where indicated using CellTiter 96 AQueous One Solution Cell Proliferation Assay (MTS) (Promega) as per manufacturer’s instructions.

Perhaps not surprisingly the drug concentrations that caused inhibition of cell growth were usually lower than the drug concentrations that caused cytotoxicity (Fig. 1, compare black circles with green squares). For some drugs the concentration differences for these two activities were ≥ tenfold (Fig. 1, ribavirin, cycloheximide, oleuropein, didemnin B). Inhibition of cell growth is not really cytostasis, which generally means no growth, and not really cytotoxicity, which is generally viewed as cell death. The reason(s) for reduced cell growth induced by any given drug may not be clear, and may be related to stress responses or some other phenomena that compromises the cells normal metabolic activities. Hence we suggest the term “cytomorbidity” to infer a level of cytotoxicity insufficient to kill the cells or induce cytostasis, but sufficient to stress or compromise the cells, with a simple growth bioassay used to indicate cytomorbidity. The cytomorbidity assay proposed herein, although considerably simpler, is not dissimilar in principle to a previously published cell proliferation assay used as a control for drug screening [38].

A simple rapid bioassay for screening drugs for potential anti-viral activity against SARS-CoV-2 is to determine whether the drug can inhibit virus-induced cytopathic effects (CPE) in Vero E6 cells. Remdesivir is known to inhibit SARS-CoV-2 replication [6] and is used herein to illustrate the behavior of an effective drug in this bioassay. Remdesivir was able to inhibit virus-induced CPE by 50% at ≈ 1 µg/ml and the drug caused 50% cytotoxicity at ≈ 100 µg/ml, providing a selectivity index of ≈ 100. Importantly, remdesivir showed cytomorbidity at ≈ 70 µg/ml, which still leaves a selectivity index of ≈ 70 (Figs. 1, 2, Table 1, Remdesivir). Hydroxychloroquine was able to inhibit viral CPE by 50% at ≈ 20 µg/ml and showed a 50% loss of viability using the MTS assay at ≈ 100 µg/ml, suggesting a selectivity index of ≈ 5. However, cytomorbidity was clearly evident at ≈ 40 µg/ml, so the anti-viral activity occurred at similar concentrations to those that caused cytomorbidity (Fig. 1, Table 1, Hydroxychloroquine); indicating a potential false positive. The overlapping activities are clearly evident when the crystal violet stained plates are viewed (Fig. 2).

The close relationship between anti-viral activity and translation inhibition (inherent in the stress responses described above) can be seen with the use of the translation inhibitors, cycloheximide and didemnin B. These drugs provide selectivity indices of ≥ 10, when comparing viral CPE inhibition and cytotoxicity. However, concentrations that inhibited viral CPE again overlapped with those that caused cytomorbidity (Fig. 1, Cycloheximide, Didemnin B). The drug γ-mangostin would appear to have a small level of anti-viral activity with a low selectivity index, but again this activity overlapped with the cytomorbidity (Fig. 1, γ-mangostin). Linoleic acid is reported to contribute to anti-viral activity at 50 µM [39]; however, this drug shows clear cytomorbidity activity above ≈ 20 µM (Fig. 1, Linoleic acid). Thus, as for hydroxychloroquine, the assay results for these latter drugs provide no supportive data for anti-viral activity, instead they suggest these drugs inhibit viral replication non-specifically by impairing cellular activities. Nitazoxanide showed some anti-viral activity, but this coincided with cytotoxicity, providing an example of the conventional cytotoxicity control that would be used to argue that the drug has no specific anti-viral activity and has a selectivity index of 1 (Fig. 1, Nitazoxanide). Curiously, higher concentrations of nitazoxanide were needed to inhibit cell growth than were needed to induce cytotoxicity; likely an example of cell density associated toxicity.

The frequently used MTS assay, as expected, often gave results similar to those provided by the cytotoxicity assay. Importantly, the MTS assay did not provide a measure of cytomorbidity, presumably because mitochondria largely remain active even in stressed cells and/or cells in G₀ (cytostasis). For oleuropein, cyclosporine A and γ-mangostin, cytomorbidity was associated with an increase in MTS activity (Fig. 1). The MTS bioassay may thus provide slightly misleading information in this context; i.e. increased mitochondrial activity, rather than indicating increased cell numbers, can sometimes be associated with stress or mild toxicity.

The CPE-based assay described herein has some inherent limitations. Drugs whose mechanism of action require induction of type I interferons, would be ineffective in this assay system as Vero E6 cells do not make type I interferons. The CPE-based assay also provides a low sensitivity read-out. Higher drug concentrations are likely needed to prevent virus-induced CPE (overwhelming infection resulting in cell death) than would be needed to inhibit viral replication as measured (for instance) by qRT-PCR of virus released into culture supernatants [40]. Although more sensitive anti-viral activities exist [40], the CPE-based assay represents a screening tool able rapidly and cheaply to identify promising anti-viral candidates. More sensitive assays could be also envisaged for assessing cytomorbidity, such as measuring activation of stress factors such as ATF3 [41], analyzing cell cycle perturbations by flow cytometry or cell growth kinetics using the IncuCyte live-cell analysis system. The cell line used herein, Vero E6, is a monkey kidney-derived cell line, whereas in humans ciliated airway cells and alveolar type II pneumocytes (AT-2 cells) are thought to be the primary targets for SARS-CoV-2 infection [42]. Drug metabolism and/or bioavailability in such cells may not be reflected in Vero E6 cells. However, although a number of human cell lines support SARS-CoV-2 infection, few if any exhibit the fulminant CPE seen in Vero E6 cells [43].

In conclusion, in vitro screening of anti-SARS-CoV-2 drugs should include not just a cytotoxicity control, but also a cytomorbidity control in order to identify potential false positives associated with anti-viral activity arising from non-specific stress responses or other disruptions of cellular activities/functions.