Background
Following the first reported cases of acquired immune deficiency syndrome (AIDS) in 1983, AIDS-associated deaths were gradually identified worldwide with increasing prevalence until 2004. However, by 2017, the death rate was reduced by 52% [
1]. Due to the expansion of antiretroviral therapy and a consequent decline in new HIV infection cases [
2‐
4].
Antiretroviral drugs are divided into four classes: entry/fusion inhibitor, reverse transcription inhibitor (RTI), integrase inhibitor (INI), and protease inhibitor (PI) [
5,
6]. Highly active antiretroviral therapy (HAART), a standard HIV/AIDS treatment method, is a cocktail therapy combining three or more antiretroviral drugs that act on different targets [
7]. HAART generally comprises three drugs, specifically, two nucleoside reverse transcription inhibitors (NRTIs) with one non-nucleoside reverse transcriptase inhibitor (NNRTI) or PI (2 NRTIs + NNRTI or 2NRTIs + PI) [
8]. Sometimes, RTI + PI combinations are used with INI or entry inhibitor or as alternative treatment options (RTI + PI + INI or RTI + PI + entry inhibitor) [
8]. HAART effectively reduces the viral load and facilitates significant recovery of immune functions in HIV/AIDS patients, increasing the survival period by more than 7–10 years or even longer compared to single drug-treated patients [
7‐
9]. However, continued efforts to design more effective novel anti-HIV drugs are urgently required to combat the emergence of highly mutagenic HIV strains and continuous drug resistance [
10]. Following the initial approval of zidovudine as a therapeutic NRTI by the US Food and Drug Administration (FDA) in 1987, various anti-HIV drugs have been developed as INI, starting with raltegravir (RAL) in 2007 followed by elvitegravir (EVG) and dolutegravir (DTG) [
9,
11,
12].
The integrase (IN) protein plays an important role in transferring viral DNA to the host nucleus in the HIV replication process and serves as an important pharmacological target for next-generation anti-HIV drugs [
13,
14]. Integration can be classified into two steps: (1) '3′ processing' that refers to the process of cutting dinucleotides at both ends of viral DNA for formation of a pre-integration complex (PIC) by combining with IN and (2) the strand transfer step whereby PIC is transported into the host nucleus by IN and combined with lens epithelial-derived growth factor/p75 (LEDGF/p75) in chromosomal DNA to integrate viral DNA [
14‐
17]. RAL, EVG, and DTG are strand transfer inhibitors (INSTI) that recognize and bind the catalytic core domain (CCD) of integrase and block this process [
12,
13,
17,
18].
In 2014, BI 224436, the first approved non-catalytic site integrase inhibitor (NCINI), was developed by Boehringer Ingelheim (Canada) Ltd. In contrast to INSTIs, BI 224436 binds a highly conserved allosteric site in CCD of IN to induce conformational changes in the catalytic site, thus disrupting interactions of IN with long-terminal repeat (LTR) DNA, and is additionally reported to inhibit 3′-processing [
13,
19,
20]. NCINIs, a new class of INI drugs, can overcome the problems of INSTI-resistant viruses based on its different inhibition mechanism. Specifically, INSTIs directly inhibit IN-LEDGF/p75 interactions while NCINIs bind CCD to inhibit IN-LTR DNA generation [
13,
20].
We were commissioned by a domestic pharmaceutical company to evaluate the efficacy of a novel NCINI candidate but were unable to verify antiviral activity using the TZM-bl luciferase system. In view of this finding, we attempted to develop a suitable method for accurately assessing the antiviral efficacy of NCINI.
To achieve optimal results, a drug efficacy test should always take into account the biological mechanism. Comparative evaluation of the efficacy of INSTI and NCINI compounds using various in vitro methods in this study facilitated the identification of a novel system appropriate for screening of NCINIs.
Methods
Cells and viruses
MT2 cells were maintained in Roswell Park Memorial Institute 1640 medium (RPMI1640, HyClone, Logan, UT) containing 10% fetal bovine serum (FBS, Invitrogen, Carlsbad, CA) and 1% penicillin/streptomycin (P/S, gibco, Waltham, MA). TZM-bl and HeLa cells were maintained in high-glucose Dulbecco’s Modified Eagle's medium (DMEM, HyClone, Logan, UT) containing 10% FBS and 1% P/S. All cell lines were incubated at 37 °C with 5% CO2. To produce the infectious HIV-1 AD8 strain, 20 μg pNL4.3(AD8) clone was transfected into HeLa cells using iN-fect™ (iNtRON Biotechnology, Seongnam, Korea). After 48 h of culture, culture media were harvested and centrifuged for 2000 rpm (1344 rcf) at 5 min for removal of cell debris. Harvested viruses were stored at − 80 °C. Infectious virus titers were determined based on 50% tissue culture infectious dose (TCID50) according to the endpoint method of Reed and Muench (1938).
Drugs
RAL, DTG and EVG were kindly provided by the New Drug development team, R&D center, ST Pharm (Seoul, Korea) and BI 224436 by Professor Baek Kim (School of Medicine Health Science Research Building, Emory University, Atlanta, GA).
Measurement of cell cytotoxicity of anti-HIV drugs
To determine the cytotoxicity of anti-HIV drugs, cell viability was assessed via the water-soluble tetrazolium salt (WST) method using an EZ-Cytox kit (Daeil Lab Service, Seoul, Korea) according to the manufacturer’s instructions. Briefly, TZM-bl and MT2 cells were seeded on 96-well cell culture plates at a density of 1 × 104 cells/well and cultured overnight. Cells were treated with serial dilutions of each drug (two-fold dilutions from 50,000 to 2.54 nM). On days 2 and 5 of incubation, 10 μl EZ-Cytox solution was added to each well and incubated for 2 h, followed by spectrophotometric measurement of absorbance at 540 nm. The CC50 value of samples was defined as the concentration inducing 50% cell death.
Enzyme-linked immunosorbent assay for p24
ELISA was conducted to detect HIV-1 p24 for assessment of antiviral activity using a HIV-1 p24 ELISA kit (XpressBio, Frederick, MD). To this end, MT2 cells seeded on a 96-well cell culture plate at a density of a 1 × 104 cells/well were infected with 500 TCID50 of HIV-1 AD8 strain. Each drug was serially diluted threefold (from 10,000 to 0.51 nM) for treatment of cells. After five days of culture at 37 °C with 5% CO2, 100 μl of culture medium was harvested and supernatant obtained by centrifugation for 5 min at 5000 rpm (8400 rcf), with storage at − 80 °C. Cell culture media of non-infected and infected cells without INI treatment were set as the negative and positive control, respectively. The ELISA procedure was conducted according to the manufacturer’s instructions. Briefly, samples were mixed with 20 μl lysis buffer, 200 μl aliquots pipetted into a microplate, and incubated for 1 h at 37 °C. After incubation, the contents of the wells were aspirated and microtitration plates washed six times with 350 μl wash buffer. Each well was treated with 100 μl detection antibody for 1 h at 37 °C, which was subsequently removed by washing under the same conditions. An aliquot (100 μl) of streptavidin-HRP conjugate was added into each well, followed by incubation at room temperature for 30 min. After washing under the same conditions, 100 μl substrate solution was immediately dispensed into each well and incubated for 30 min at room temperature with protection from direct sunlight. For termination of the reaction, 100 μl stop solution was added to each well and absorbance values at 450 nm immediately read using a microplate reader.
Antiviral activity test using the TZM-bl cell system
TZM-bl cells were seeded on 96-well cell culture plates at a density of 1 × 104 cells/well and cultured overnight. Each drug was twofold serially diluted from 10,000 to 0.15 nM and treated to cells. After a 30 min incubation period, viral infection was performed with 500 TCID50 of HIV-1 AD8. Cells were cultured for 48 h after infection and luciferase activity measured using Beetle-Lysis Juice (PJK GmbH, Kleinblittersdorf, Germany) according to the manufacturer’s instructions. Briefly, the medium was removed, and cells washed three times with 200 μl PBS. Next, 100 μl Beetle-Lysis Juice containing luciferin and ATP were added to each well and incubated for 5 min with protection from sunlight. Subsequently, luciferase activity was measured using a micro beta counter (PerkinElmer, Waltham, MA) after transferring solutions to a white 96-well plate. Anti-HIV efficacy of drugs was determined based on reduced expression of luciferase relative to the virus-only treatment group.
Strand transfer inhibition assay
The strand transfer assay was performed using the HIV-1 integrase assay kit (XpressBio, Frederick, MD) according to the manufacturer’s instructions. Briefly, 100 μl of 1X donor substrate DNA (DS DNA) solution was added to each well and incubated for 30 min at 37 °C. The liquid was aspirated from the wells and washed 5 times with 300 μl wash buffer, followed by incubation with 200 μl blocking buffer per well for 30 min at 37 °C. Following aspiration of the liquid, wells were washed three times with 200 μl reaction buffer. Next, 100 μl IN enzyme solution was added to each well and incubated under similar conditions followed by removal of liquid and three washes with 200 μl reaction buffer. Each test sample was fivefold serially diluted (from 1000 to 8 μM) in reaction buffer and 50 μl aliquots added per well. After 5 min incubation at room temperature, 50 μl 1X target substrate DNA (TS DNA) solution was directly added to the 50 μl test sample within the wells. Reactions were mixed by tapping the plate gently 3–5 times and incubating for 30 min at 37 °C, washed 5 times with 300 μl wash solution and incubated with 100 μl HRP antibody for 30 min at 37 °C. After washing the plate under the same conditions, 100 μl TMB peroxidase substrate solution was added per well and incubated for 10 min at room temperature. To terminate the reaction, 100 μl TMB stop solution was directly added to wells and absorbance read using a plate reader at 450 nm.
Confirmation of inhibition of 3′-processing activity of NCINI
To confirm the 3′-processing inhibition activity NCINI, the strand transfer inhibition assay was modified. The plate coating process with DS DNA was conducted in a similar manner. However, prior to treatment with LTR DS DNA, aliquots of fivefold serially diluted INI (from 2000 to 3.2 μM) were incubated with 20 nM IN for 30 min. Reaction of integrase first with the drug before its reaction with DS DNA is a necessary step to validate the 3′-processing inhibitory activity of the compound. The integrase-inhibitor mixture was added to LTR DS DNA-conjugated 96-well plates. Subsequent steps were conducted in a similar manner as the strand transfer assay.
Statistical analysis
All measures of variance are presented as standard error of mean (SEM). Data were analyzed via two-way analysis of variance (two-way ANOVA) with Tukey post-hoc test using Prism8 (GraphPad Software, San Diego, CA). Differences were considered significant at p-values < 0.05.
Discussion
Following the earliest isolation and identification of HIV, extensive research has focused on effective treatments for the disease. The rapid development of drugs that inhibit HIV through various mechanisms, such as suppression of integration, reverse transcription and virus entry/fusion, has led to a steady decline in HIV-associated deaths worldwide. Evaluation of the efficacy of various types of drug candidates requires accurate methods based on their specific characteristics and mechanisms of action. Inappropriate analysis of candidates may lead to false or no results, and consequently, considerable losses to the drug development industry. We were commissioned to evaluate the efficacy of the novel NCINI candidates. Initially, efficacy assessment was conducted with the TZM-bl system, which we concluded was unsuitable for assessment of NCINI compounds in view of the low efficacy of BI 224436. Since we obtained different results compared to the previously known efficacy of BI224436 in our study using the TZM-bl system, we needed a clear and easy way to confirm this. In previous experiments, BI 224436 efficacy was evaluated using human peripheral blood mononuclear cells (hPBMCs), C8166 [
19,
20], and T lymphocyte cell lines. Because hPBMCs are obtained by separating from normal human blood, there are more labor or procedural restrictions such as approval of institutional review board (IRB) than cell line in obtaining it. Furthermore, because p24 ELISA is a commonly used method in HIV diagnosis, the method met the condition we needed. For these reasons, the lymphocyte cell line was employed to facilitate evaluation of the process for p24 ELISA in our experiment. We performed a p24 ELISA method by infecting the suspension cell with the virus for longer periods of time, which yielded distinct results from the TZM-bl system. p24 ELISA result obtained using MT2 cells showed nearly 20-fold higher inhibition activity than those with the TZM-bl system, consistent with earlier findings on BI 224436 [
19,
20]. INSTI compounds used as controls showed effective anti-HIV activity in both TZM-b1 and p24 ELISA assays while accurate anti-HIV activity of BI 224436 was only determined via p24 ELISA. The key difference between the two systems is the possibility of long-term incubation after virus infection or drug treatment, which is attributable to the different cell lines used [
29].
Finally, the 3′-processing inhibition activity of BI224436 was also confirmed through the modified process.
NCINI is classified as an allosteric integrase inhibitor (ALLINI) [
13]. ALLINI directly inhibits not only HIV integration but also binding of viral RNA with integrase in virions. The compound causes damage in the morphogenesis process, creating a non-infectious virion. Reportedly, NCINI exerts its inhibitory activity under conditions of more than two cycles of virus replication that takes more than four days [
29]. Thus, we hypothesized the incubation time of cells in efficacy analysis of NCINI may be an important factor for accurate activity measurement. TZM-bl is an adherent cell line and due to spatial constraints, long-term monitoring is not possible owing to cell overgrowth problems following incubation periods of more than three days. However, the suspension cell such as MT2 can be cultured for longer periods (more than four days) compared to adherent cell lines due to less restriction of space. Moreover, since HIV replication and whole life cycle can be fully achieved in the MT2 cell that differentiates with TZM-bl cell, the antiviral activity of allosteric integrase inhibitors may be maximized. Therefore, when assessing the efficacy of NCINI and other ALLINI candidates in cells, the precise effects may be measurable only under incubation conditions of more than four days. It would also be very important to use a cell line that HIV can multiply. Some ALLINIs bind directly to CCD of IN to exert their effects but others are reported to inhibit protein–protein interactions by combining it into a distinct site [
13,
19,
29]. BI 224436, the first identified NCINI, prevents integration by blocking 3′-processing as well as structural deformation of CCD. Therefore, for evaluation of the effectiveness of new ALLINI candidates, co-execution of cell and mechanism-based activity assays, such as the 3′-processing inhibition assay, should be considered.
Open AccessThis article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit
http://creativecommons.org/licenses/by/4.0/. The Creative Commons Public Domain Dedication waiver (
http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated in a credit line to the data.
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.