nach oben

European Journal of Trauma and Emergency Surgery

Erschienen in:

08.01.2022 | Review Article

3D printing-assisted surgery for proximal humerus fractures: a systematic review and meta-analysis

verfasst von: Kai Li, Zhendong Liu, Xiaolei Li, Jingcheng Wang

Erschienen in: European Journal of Trauma and Emergency Surgery | Ausgabe 5/2022

Einloggen, um Zugang zu erhalten

Abstract

Aim

This study aimed to assess the efficacy of three-dimensional (3D) printing to conventional surgeries in proximal humerus fractures (PHFs).

Methods

Eight databases were comprehensively searched for data on clinical characteristics and outcomes, including operation time, time to bone healing, blood loss volume, number of intraoperative fluoroscopies, the reduction rate of anatomic proximal humeri, Constant scores, Neer rating, loss of humeral head height, and complications. These data were compared between 3D printing-assisted versus conventional surgeries to learn the efficacy of 3D printing-assisted surgery.

Results

3D printing-assisted surgery outperformed conventional procedures in operation time, blood loss volume, time to the union of PHFs, number of fluoroscopies, the reduction rate of anatomic proximal humeri, Constant scores, Neer rating, and complications.

Conclusion

3D printing-assisted surgery improves operation time, anatomic healing, pain, and motion, with less harm to patients.

Naeder H, Beat H. New trends in the treatment of proximal humerus fractures. Clin Orthop Relat Res. 2006;442:100–8.CrossRef

Guo WJ, Zhao YM, Wang XH, et al. The correlation between the number of medial column support screws and the efficacy of locking plate for treatment of proximal humeral fractures. Chin J Orthop Trauma. 2015;35(01):40–7.

Court-Brown CM, Caesar B. Epidemiology of adult fractures: a review. Injury. 2006;37(8):691–7.CrossRef

Schmalzl J, Jessen M, Gilbert F, Gerhardt C, Lehmann L-J. Proximal humeral fracture morphology in patients with advanced cuff tear arthropathy: an observational study in a surgically treated cohort. Eur J Orthop Surg Traumatol. 2021;31(3):517–24.CrossRef

Mease Samuel J, Kraeutler Matthew J, GonzalesLuna Daniel C, Gregory James M, Gardner Michael J, Choo AM. Current controversies in the treatment of geriatric proximal humeral fractures. J Bone Jt Surg Am. 2021;103(9):829–36.CrossRef

Sandra F, Laurent A, Amir S, Muller MA, Daniel R. Treatment options for proximal humeral fractures in the older adults and their implication on personal independence. Arch Orthop Trauma Surg. 2020;140(12):1971–6.CrossRef

Setaro N, Rotini M, Luciani P, Facco G, Gigante A. Surgical management of 2- or 3-part proximal humeral fractures: comparison of plate, nail and K-wires. Musculoskelet Surg. 2020;30. https://doi.org/10.1007/s12306-020-00686-4.

Beks BR, Yassine O, Herman F, et al. Operative versus nonoperative treatment of proximal humeral fractures: a systematic review, meta-analysis, and comparison of observational studies and randomized controlled trials. J Shoulder Elb Surg. 2018;27(8):1526–34.CrossRef

Sun Q, Ge W, Li G, et al. Locking plates versus intramedullary nails in the management of displaced proximal humeral fractures: a systematic review and meta-analysis. Int Orthop. 2018;42(3):641–50.CrossRef

10.

Anderosn MJJ, Venkat B, Bixby EC, et al. The relationship between age and short-term complications following reverse total shoulder arthroplasty for proximal humerus fractures. Semin Arthroplast JSES. 2021;31(1):81–8.CrossRef

11.

Grawe B, Le T, Lee T, Wyrick J. Open reduction and internal fixation (ORIF) of complex 3- and 4-part fractures of the proximal humerus. Geriatr Orthop Surg Rehabil. 2012;3(1):27–32.CrossRef

12.

Chul SW, SukWoong K, Min SS, Seung SJ, Hyeok CM. High bone union rate using a locking plate for proximal humeral fractures in patients older than 70 years: importance of the medial column. Eur J Trauma Emerg Surg. 2021;17. https://doi.org/10.1007/s00068-021-01630-2.

13.

Vaibhav B, Rakesh B, Prashant P. 3D printing- creating a blueprint for the future of orthopedics: current concept review and the road ahead! J Clin Orthop Trauma. 2018;9(3):207–12.CrossRef

14.

Honigmann P, Thieringer F, Steiger R, Haefeli M, Schumacher R, Henning J. A simple 3-dimensional printed aid for a corrective palmar opening wedge osteotomy of the distal radius. J Hand Surg Am. 2016;41(3):464–9.CrossRef

15.

Bizzotto N, Tami I, Tami A, et al. 3D Printed models of distal radius fractures. Injury. 2016;47(4):976–8.CrossRef

16.

Moher D, Liberati A, Tetzlaff J, Altman DG. Preferred reporting items for systematic reviews and meta-analyses: the PRISMA statement. PLoS Med. 2009;6(7):e1000097.CrossRef

17.

Slim K, Nini E, Forestier D, et al. Methodological index for non-randomized studies (minors): development and validation of a new instrument. ANZ J Surg. 2003;73(9):712–6.CrossRef

18.

Wei XD, Xiao XG, Zou K, Chen YG. Application of 3D printing technology in complex proximal humeral fractures. J Pract Med. 2018;34(02):335–6.

19.

Zheng SJ, Li DS, Wang L, Zhang DW, Ma FQ, Wang AG. Application of 3D printing technology to assist in the treatment of complex proximal humeral fractures in the elderly. Chin J Gerontol. 2017;37(07):1698–700.

20.

You W, Liu LJ, Chen HX, et al. Application of 3D printing technology on the treatment of complex proximal humeral fractures (Neer3-part and 4-part) in old people. Orthop Traumatol Surg Res OTSR. 2016;102(7):897–903.CrossRef

21.

Chen Y, Jia X, Qiang M, Zhang K, Chen S. Computer-assisted virtual surgical technology versus three-dimensional printing technology in preoperative planning for displaced three and four-part fractures of the proximal end of the humerus. J Bone Jt Surg Am. 2018;100(22):1960–8.CrossRef

22.

Liao ZP, Ou WH, Kang L, Chen SX. Application of 3D printing combined with MIPO technology in the treatment of Neer second and third part proximal humeral fractures in 12 cases. Chin J Orthop Traumatol. 2016;24(07):60–2.

23.

Dai F, Wang Q, Wang J, Fan ZH, Jiang ZY. Advantages of 3D printing simulation surgery method in the proximal humeral Neer four-part fracture and its effect on postoperative functional recovery. Chin Med Her. 2020;17(36):95-98+104.

24.

Chen J, Ma JC, Song ZH, Yuan JB, Chen SI. The clinical effects of 3D printing and LCP combined with MIPO technology in the treatment of adult Neer II and III proximal humeral fractures. J Xinjiang Med Univ. 2019;42(07):895–8.

25.

Zhong H, Chen J, Li JW, et al. Application of 3D printing technology in PHILOS internal fixation of proximal humeral fractures and medial talar support reconstruction. Chin J Bone Jt Inj. 2018;33(07):757–9.

26.

Zhang R, Chen K, Lou YZ, Wang JS, Guo XS. Observation on the effect of 3D printing technology-assisted proximal humeral locking plate internal fixation for the treatment of proximal humeral fractures. Chin J Bone Jt Inj. 2018;33(03):307–8.

27.

Herbert R, Mark T, Neviaser RJ, et al. Classification of proximal humeral fractures based on a pathomorphologic analysis. J Shoulder Elb Surg. 2016;25(3):455–62.CrossRef

28.

Matsumura N, Furuhata R, Seto T, et al. Reproducibility of the modified Neer classification defining displacement with respect to the humeral head fragment for proximal humeral fractures. J Orthop Surg Res. 2020;15(1):438.CrossRef

29.

Xiong L, Li XY, Li H, Chen ZY, Xiao T. The efficacy of 3D printing-assisted surgery for traumatic fracture: a meta-analysis. Postgrad Med J. 2019;95(1126):414–9.CrossRef

30.

Chen C, Cai L, Zheng W, Wang J, Guo X, Chen H. The efficacy of using 3D printing models in the treatment of fractures: a randomised clinical trial. BMC Musculoskelet Disord. 2019;20(1):65.CrossRef

31.

Zhu DM, Zhang Z, Zhang J, et al. The efficacy of 3D printing-assisted surgery in treating distal radius fractures: systematic review and meta-analysis. J Comp Eff Res. 2020;9(13):919–31.CrossRef

32.

Lisa H, Helge E, Wagner CF, et al. Age- and severity-adjusted treatment of proximal humerus fractures in children and adolescents-a systematical review and meta-analysis. PLoS One. 2017;12(8):e0183157.

33.

Tack P, Victor J, Gemmel P, Annemans L. 3D-printing techniques in a medical setting: a systematic literature review. Biomed Eng Online. 2016;15(1):115.CrossRef

34.

Smith GCS, Bateman E, Cass B, et al. Reverse shoulder arthroplasty for the treatment of proximal humeral fractures in the elderly (ReShAPE trial): study protocol for a multicentre combined randomised controlled and observational trial. Trials. 2017;18(1):91.CrossRef

35.

Wan SX, Meng FB, Zhang J, Chen Z, Yu LB, Wen JJ. Experimental study and preliminary clinical application of mini-invasive percutaneous internal screw fixation for scaphoid fracture under the guidance of a 3D-printed guide plate. Curr Med Sci. 2019;39(6):990–6.CrossRef

36.

Cook A, Baldwin P, Fowler JR. Incidence of flexor pollicis longus complications following volar locking plate fixation of distal radius fractures. Hand. 2020;15(5):692–7.CrossRef

Titel: 3D printing-assisted surgery for proximal humerus fractures: a systematic review and meta-analysis
verfasst von: Kai Li
Zhendong Liu
Xiaolei Li
Jingcheng Wang
Publikationsdatum: 08.01.2022
Verlag: Springer Berlin Heidelberg
Erschienen in: European Journal of Trauma and Emergency Surgery / Ausgabe 5/2022
Print ISSN: 1863-9933
Elektronische ISSN: 1863-9941
DOI: https://doi.org/10.1007/s00068-021-01851-5

Arthropedia

Grundlagenwissen der Arthroskopie und Gelenkchirurgie. Erweitert durch Fallbeispiele, Videos und Abbildungen.
» Jetzt entdecken

Neu im Fachgebiet Orthopädie und Unfallchirurgie

25.04.2024 | Hypertonie | Nachrichten

Update Orthopädie und Unfallchirurgie

Bestellen Sie unseren Fach-Newsletter und bleiben Sie gut informiert.

Newsletter bestellen

Springer Medizin

3D printing-assisted surgery for proximal humerus fractures: a systematic review and meta-analysis

Abstract

Aim

Methods

Results

Conclusion

Arthropedia

Neu im Fachgebiet Orthopädie und Unfallchirurgie

Therapiestart mit Blutdrucksenkern erhöht Frakturrisiko

Ärztliche Empathie hilft gegen Rückenschmerzen

Stereotaktische Radiatio schlägt konventionelle Bestrahlung

Vorsicht mit hohen NSAR-Dosen bei ankylosierender Spondylitis!

Update Orthopädie und Unfallchirurgie

Springer Medizin

Abstract

Aim

Methods

Results

Conclusion

Bitte loggen Sie sich ein, um Zugang zu diesem Inhalt zu erhalten

Weitere Artikel der Ausgabe 5/2022

Timing of osteosynthesis of fractures in children changes the outcome

Primary or revision arthroplasty with an integrated acetabular cup—MUTARS® RS cup system

Manikins versus simulated patients in emergency medicine training: a comparative analysis

Development and validation of the first performance assessment scale for interdisciplinary chest tube insertion: a prospective multicenter study

Plate fixation of the anterior pelvic ring in patients with fragility fractures of the pelvis

Intraoperative torsion control using the cortical step sign and diameter difference in tibial mid-shaft fractures

Arthropedia

Neu im Fachgebiet Orthopädie und Unfallchirurgie

Therapiestart mit Blutdrucksenkern erhöht Frakturrisiko

Ärztliche Empathie hilft gegen Rückenschmerzen

Stereotaktische Radiatio schlägt konventionelle Bestrahlung

Vorsicht mit hohen NSAR-Dosen bei ankylosierender Spondylitis!

Update Orthopädie und Unfallchirurgie