Background
Despite advances in surgical techniques and the availability of newly developed antibiotics, bone infections after surgical procedures and trauma continue to be a difficult problem for surgeons [
1,
2]. Typically, operative debridement and antibiotic therapy are preferred treatments for bone infection [
3]. Although intravenous route of antibiotic injection produces adequate antibiotic concentration in the blood, recurrence of infection, the high cost of the antibiotics, and poor patient compliance are still problems. Osseous defects after debridement can be reconstructed using various techniques, such as cancellous bone grafting, free microvascular bone transfer, and distraction osteogenesis [
1,
4]. However, substantial morbidity is associated with harvesting of bone grafts and bone transplantation. Currently, the standard treatment remains a combination of surgical intervention and administration of an effective local antibiotic therapy [
1,
5]. For antibiotic treatment, incorporation of antibiotics into polymethyl methacrylate (PMMA) [
6,
7], a concept that was originally developed by Buchholz et al., is commonly used [
8]. Antibiotic-impregnated PMMA beads provide a high local concentration of the drug and have advantages over intravenous injection in that the beads yield fewer systemic complications and allergic reactions. However, PMMA beads require a second operation for removal after prolonged implantation [
1,
9].
Various types of carrier materials have been used based on their ability to achieve sustained bactericidal concentrations of the antibiotic [
3,
10‐
13]. A biodegradable carrier as a slow release system for delivering antibiotics may be better than PMMA beads and intravenous antibiotics in several ways. First, biodegradable beads provide long-term administration of a bactericidal concentration of the antibiotic, and the biodegradability of the beads can be varied to treat many types of infections. Second, because the biodegradable beads dissolve, there is no need for surgical removal and soft tissue reconstruction. Poly(lactide-
co-glycolide) (PLGA) copolymer is a promising biodegradable material that is nontoxic, elicits a minimal inflammatory response, and can be absorbed with no accumulation in vital organs. Garvin et al. described the use of polyglycolide beads loaded with gentamicin for effective treatment of tibial
Staphylococcus aureus osteomyelitis in a canine model [
14]. Ueng et al. developed a hot-compress molded method to manufacture PLGA copolymer antibiotic beads and achieved sustained in vitro antibiotic release for more than 30 days [
11,
12]. In addition, Ueng et al. showed in vivo antibiotic release for 56 days from PLGA copolymer antibiotic beads in a rabbit model [
15]. However, the efficacy of PLGA vancomycin beads for treatment of experimental bone infection due to
S. aureus has never been reported.
Fluorine-18-fluoro-2-deoxy-D-glucose positron emission tomography combined with computed tomography (
18F-FDG PET/CT) is a cutting-edge functional imaging method that provides images with higher resolution and concomitant anatomical information.
18F-FDG PET/CT has been used as a diagnostic imaging modality for detection of prosthetic joint infection [
16,
17], Alzheimer’s disease [
18], inflammatory and infectious vascular disease [
19], and tumors [
20]. Postsurgical infection is one of the most prevalent and challenging complications faced by orthopedic surgeons and patients, and clinical experience suggests that
18F-FDG PET/CT may be promising for imaging of bone infections [
21‐
24]. Previous animal studies have shown that
18F-FDG uptake is increased in the context of bacterial infections [
25‐
29].
18F-FDG uptake is also significantly higher in the osteomyelitic region than in healing bone [
28].
In the present study, we evaluated the release of vancomycin from PLGA vancomycin beads and examined the relative activity of the released antibiotics in vitro. In addition, we examined the use of 18F-FDG PET/CT for quantitative monitoring of the response to PLGA vancomycin bead treatment in a model of bone infection.
Methods
Development of a biodegradable bead for antibiotics
A biodegradable antibiotic bead was developed using PLGA copolymer and vancomycin (Abbott Laboratories, North Chicago, IL, USA). The PLGA copolymers used were poly(D,L)-lactide-co-glycolide with a ratio of 50:50 and an intrinsic viscosity of 0.4 (Boehringer Ingelheim KG, Germany). All copolymers were available in powder form with particle size ranges from 100 to 200 mm. The copolymer and vancomycin were premixed using a dry mixer (copolymer to vancomycin ratio of 5:1). The mixture was molded into 5-mm diameter beads by a compression molding machine at 55 ° C [
12,
15].
In vitro elution assay
An in vitro elution method was employed to determine the release characteristics of antibiotics from the beads. A phosphate-buffered saline (PBS, pH 7.4) was used as the dissolution medium. The beads were placed in glass test tubes with a volume of 1 mL PBS. All tubes were incubated at 37 °C. The dissolution medium was collected and analyzed at every 24-h interval. Fresh PBS (1 mL) was then added for the next 24-h period, and this procedure was repeated until the capsule was fully dissolved. The antibiotic concentrations in buffer for the elution studies were determined by a high-performance liquid chromatography (HPLC) assay standard curve for vancomycin. The HPLC analyses were conducted on a Walters 600 Multi-solvent Delivery System. The column used for separation of the antibiotics was a SYMMETRY C8, 3.9 cm × 150 mm HPLC column (Waters). The mobile phase contained 0.01 mol heptanesulphonic acid (Fisher Scientific UK Ltd.) and acetonitrile (Mallinckrodt, USA) (85/15, v/v). The absorbency was monitored at 280 nm, and the flow rate was 1.4 mL/min. All samples were assayed in triplicate, and sample dilutions were performed to bring the unknown concentrations into the range of the assay standard curve. A calibration curve was made for each set of the measurements (correlation coefficient >0.99).
Activities of antibiotics
The minimum inhibitory concentration (MIC) of vancomycin to S. aureus (ATCC 259523) was determined using an antibiotic tube dilution method in Cation Supplemented Mueller-Hinton Broth (Difco Laboratories, Detroit, MI). Vancomycin was diluted serially twofold in tubes containing 0.5 mL of the cation-supplemented Mueller-Hinton broth. The S. aureus inocula for each series of tubes was 0.5 mL of an overnight culture containing 5.0 × 105 colony-forming units/mL. The MIC was considered to be the lowest concentration of antibiotic that prevented turbidity after 24 h of incubation at 37 °C. The antibiotic concentrations at the transition point between bacterial killing and resistance to the antibiotic (the breakpoint sensitivity limit) for vancomycin were determined by tube dilution sensitivities.
The relative activity test of vancomycin to S. aureus (ATCC65389) was determined using an antibiotic disk diffusion method in Nutrient Broth (beef extract, peptone, Difco Laboratories). The eluent of the capsules was tested up to 36 days. Each sample was first diluted or concentrated to 50 mg/mL. Eight microliters of the buffer sample from each daily buffer sample was pipetted onto 6-mm absorption disks. The disks were placed on the nutrient agar plates that were seeded with a layer of S. aureus, and the zones of inhibition were measured with a micrometer after 16–18 h of incubation at 35 °C. The equation and other relevant items for relative activity were as follows: relative activity (%) = (the diameter of sample inhibition zone − the diameter of disk)/(the diameter of maximum inhibition zone − the diameter of disk).
Animal model of bone defect
Six adult male New Zealand white rabbits weighing 2.5–3.4 kg were used. All animal procedures were reviewed and approved by the Institutional Animal Care and Use Committee of the Chang Gung Memorial Hospital. The methods were carried out in accordance with the approved guidelines.
Induction of infection (first stage of surgery)
A cylindrical bony cavity (15 mm × 12 mm × 10 mm) was surgically made using a round bur and obliterated with a customized PMMA spacer at the left and right distal femur of each rabbit. The bone cement acted as a foreign body to conduct infection. Subsequently, 0.1 mL of 1 × 105 colony-forming units/mL of S. aureus was withdrawn by a pipette tip and directly applied to the space surrounding the bone cement (three rabbits), and 0.1 mL of sterile saline was applied to the corresponding space of control group (three rabbits). The periosteal and fascial layers were closed over the cortical defect.
Debridement (second stage of surgery)
Two weeks after the initial surgery, all animals underwent the second stage of surgery. Using the previous surgical approach, the defect area was exposed and swab cultures were taken to confirm that the induction of staphylococcal bone infection had been successful. The biodegradable PLGA vancomycin beads were implanted into the cavities for infection therapy. The swab specimens were cultured for 20 h at 35 °C in blood agar plates. The bone cement was removed and separately cultured for 4 days at 35 °C on brain heart infusion solution (BBL; Becton Dickinson).
18F-FDG PET/CT
18F-FDG PET was performed for each animal at 2 weeks after the second stage of surgery. A mean of 96 MBq of 18F-FDG (range, 89–100 MBq) was injected into the ear artery. The animals were not fasted before 18F-FDG administration. PET/CT scanning was performed 40 min after the injection of 18 F-FDG with the GE DSTE PET/CT scanner that was equipped with a three-dimensional (3D) mode image acquisition system. The PET acquires 47 contiguous slices with an axial field of view of 70 cm. The slice thickness of the scanner is 3.75 mm, and the spatial resolution was 6 mm in full width at half maximum in the center of the field of view. The CT was performed using a 16-slice helical CT. The CT scan data were collected at an auto mAs and 120 kV. After the CT scan, an emission scan was obtained from knee at a rate of 3 min per bed. Attenuation-corrected PET images using the CT data were reconstructed using an ordered subset expected maximization algorithm (20 subsets, 2 iterations).
PET data analysis
Quantitative analysis was performed on the circular regions of interest (ROIs) area of the right and left distal femur. 18F-FDG accumulation was reported as the standardized uptake value (SUV), which was calculated as the radioactivity of the ROI divided by the relative injected dose, expressed per kilogram of body weight.
Discussion
In the present study, in vitro data showed that the biodegradable beads released high concentrations of vancomycin during the time needed to treat bone infection. The diameter of the sample inhibition zone ranged from 6.5 to 10 mm, which was equivalent to 12.5–100 % relative activity in the bacterial inhibition test. In vivo results showed that localized infection resulted in intense continuous uptake of 18F-FDG, which was higher than that in uncomplicated healing bones. Bone infection was confirmed with positive bacterial cultures. In the vancomycin-treated animals, data showed rapidly decreasing amounts of 18F-FDG uptake after treatment.
Bacterial infections in surgery can be devastating and are often associated with considerable morbidity and poor functional outcomes [
30]. The management of postoperative infection requires surgical debridement, the removal of all necrotic tissue and implants, and the administration of systemic antibiotics. Nevertheless, antibiotic treatment may be inadequate or ineffective in patients with poorly vascularized infected tissues [
31]. Delivering local antibiotics by using antibiotic-impregnated biodegradable carriers has been proposed to provide a sustained release of antibiotics to infected areas, replacing intravenous antibiotics infusion. The possibility of PLGA copolymer being a biodegradable antibiotic carrier has been studied for years. In most previous studies, the antibiotic was microencapsulated in a PLGA bead with a high molecular weight (molecular weight 3.26 × 10
4 Da), a high percentage of the poly(lactic acid) ratio (70:30), a high antibiotic loading dosage (50 %), and a high formation temperature (110 °C) [
32‐
35]. The present study used a hot-compress molded method with a low molecular weight (molecular weight 5000 Da vs. 3.26 × 10
4 Da), a low ratio of poly(lactic acid) ratio copolymer (50:50 vs. 70:30), a low antibiotic loading dosage (16.6 vs. 50 %), and a low formation temperature (55 vs. 110 °C) to form a biodegradable antibiotic bead delivery system. In this study, the authors achieved 36 days of a sustained release of antibiotic from this antibiotic delivery system in vitro (Figs.
2 and
3) which is adequate for treatment of posttraumatic osteomyelitis (3–6 weeks) [
3,
32].
Based on our in vitro results, we next monitored the treatment response of PLGA vancomycin beads in the infection regions in vivo.
18F-FDG, the most commonly used PET tracer for diagnosis of infection [
36], has been shown to localize autoradiographically in the regions with the highest numbers of macrophages and leukocytes [
26]. The use of
18F-FDG PET to image bacterial infections is based on the intensive use of glucose by macrophages and leukocytes [
26]. Fluoro-D-deoxyglucose is transported into cells via glucose transporters and phosphorylated by hexokinase to
18F-2′-FDG-6 phosphate but is not metabolized. The degree of cellular FDG uptake is related to the cellular metabolic rate and to the number of glucose transporters [
37]. In activated cells, such as neutrophils, lymphocytes, monocytes, and macrophages, both the number and expression of glucose transporters are increased, and the affinity of deoxyglucose for these transporters is also increased [
38‐
40]. Although the early stages of bone healing, involving an inflammatory phase with a highly activated state of cell metabolism and glucose consumption may mimic infection on PET images [
41,
42]. However, the localized infection resulted in an intense continuous uptake of
18F-FDG (Fig.
6b, d), which was higher than that of the healing bones in the inflammatory phase (Fig.
6a, c) in this study. Our results consist with previous study demonstrating that bone infection could be distinguished from bone healing by
18F-FDG PET analysis [
28].
Previous studies have shown that localized infection by
S. aureus pathogen resulted in an intense continuous uptake of
18F-FDG over 3 weeks in an untreated-infection group [
28,
43]. In the present study, PET images showed decreasing amounts of
18F-FDG intensity in infected bone regions after bead treatment for 2 weeks (Fig.
7b, d). The mean SUV data also showed a significantly lower value after bead treatment (Fig.
8). Thus, our results showed that the use of biodegradable PLGA vancomycin beads was successful for eradication of the
S. aureus pathogen from bone.
The rabbit model of
S. aureus osteomyelitis has been used to explore the diagnostic efficacy of
18F-FDG PET scan. Lankier et al. showed that foreign-body-associated infection in the rabbit tibia caused by
Staphylococcus epidermidis results in lower
18F-FDG uptake than pyogenic
S. aureus infections [
44]. Koort et al. showed that bone healing is associated with a temporary increase in
18F-FDG uptake, followed by a returned to baseline [
28]. In contrast, localized osteomyelitis resulted in a significantly higher, continuous uptake of
18F-FDG. Similar results have been reported in a clinical study [
45].
18F-FDG PET/CT scanning used for monitoring therapeutic response to antimicrobials in experimental osteomyelitis also has been reported. Koort et al. showed the value of
18F-FDG PET for quantitative monitoring of the ciprofloxacin bone defect filler treatment response in bone infections [
25]. Chatziioannou et al. showed the value of
18F-FDG PET for quantitative monitoring of the daptomycin treatment response in infected tibia [
43].
Our study has several limitations. Our experiments were limited to a small number of animals in each group, and it could be argued that the differences we observed were even more significant given the small size of the experimental groups. Additionally, given the limited volume of the bony cavity, only a single dosage of vancomycin bead was used. Although this study was not designed to determine the optimal dosage and duration of vancomycin for treatment of bone infection, it establishes a conceptual framework by which to develop a large animal using dogs or goats. In addition, one of the inherent limitations of this study is that we do not know quite well yet how well the results of this study translate clinically.
In summary, 18F-FDG PET/CT imaging technology is a sensitive and specific tool in the diagnosis of experimental bon infection and in monitoring the therapeutic effects of PLGA vancomycin beads. The present study offers a biodegradable antibiotics bead to meet clinical requirements for the treatment of bone infection.
Competing interests
The authors declare that they have no competing interests.
Authors’ contributions
SWNU and SSL designed and directed the experiments and wrote the manuscript. ICW, CYY, LJY, and CFL performed the animal experiments. SJL processed the PLGA vancomycin beads. ECC performed the bacterial inhibition test. RCC and SCC performed the PET/CT experiments. All authors read and approved the final manuscript.