Skip to main content
Erschienen in: Lasers in Medical Science 9/2015

01.12.2015 | Original Article

Influence of different Er,Cr:YSGG laser parameters on long-term dentin bond strength of self-etch adhesive

verfasst von: Tahsin Yildirim, Muhammet Kerim Ayar, Cemal Yesilyurt

Erschienen in: Lasers in Medical Science | Ausgabe 9/2015

Einloggen, um Zugang zu erhalten

Abstract

The aim of the present study was to evaluate the effects of erbium, chromium: yattrium-scandium-gallium-garnet (Er,Cr:YSGG) laser frequency on microtensile bond strength (μTBS) of a self-etch adhesive to dentin after 15-month water storage. The Er,Cr:YSGG laser can safely be used on dental hard tissue. However, no study has compared the effects of Er,Cr:YSGG laser parameters and aging by water storage on the bonding effectiveness of self-etch adhesives to dentin. Thirty-five bovine teeth were randomly assigned to the following seven groups (n = 5): group I (diamond bur with high-speed handpiece (control)), group II (Er,Cr:YSGG laser 3 W/50 Hz), group III (Er,Cr:YSGG laser 3 W/35 Hz), group IV (Er,Cr:YSGG laser 3 W/20 Hz), group V (Er,Cr:YSGG laser 6 W/50 Hz), group VI (Er,Cr:YSGG laser 6 W/35 Hz), and group VII (Er,Cr:YSGG laser 6 W/20 Hz). Clearfil SE Bond was applied to the prepared dentin, and the composites were placed and cured. Resin-dentin sticks with an approximate cross-sectional area of 0.8 mm2 were obtained, and bond strength tests were performed at 24 h and 15 months of water storage after bonding. Data were analyzed with Kruskal–Wallis and Mann–Whitney U tests (p < 0.05). Laser irradiation resulted in significantly lower bond strengths when compared to bur treating. Fifteen-month water storage reduced bond strength for all groups. There was no significant difference among the effects of different laser frequencies on bond strength. It can be concluded that Er,Cr:YSGG laser used at the tested parameters may alter the dentin bond durability of self-etch adhesive.
Literatur
1.
Zurück zum Zitat Buonocore M (1955) A simple method of increasing the adhesion of acrylic filling materials to enamel. J Dent Res 34:948–953CrossRef Buonocore M (1955) A simple method of increasing the adhesion of acrylic filling materials to enamel. J Dent Res 34:948–953CrossRef
2.
Zurück zum Zitat Spencer P, Ye Q, Park J, Topp EM, Misra A, Marangos O, Wang Y, Bohaty BS, Singh V, Sene F (2010) Adhesive/dentin interface: the weak link in the composite restoration. Ann Biomed Eng 38(6):1989–2003PubMedCentralCrossRefPubMed Spencer P, Ye Q, Park J, Topp EM, Misra A, Marangos O, Wang Y, Bohaty BS, Singh V, Sene F (2010) Adhesive/dentin interface: the weak link in the composite restoration. Ann Biomed Eng 38(6):1989–2003PubMedCentralCrossRefPubMed
3.
Zurück zum Zitat Breschi L, Mazzoni A, Ruggeri A, Cadenaro M, Di Lenarda R, Dorigo EDS (2008) Dental adhesion review: aging and stability of the bonded interface. Dent Mater 24(1):90–101CrossRefPubMed Breschi L, Mazzoni A, Ruggeri A, Cadenaro M, Di Lenarda R, Dorigo EDS (2008) Dental adhesion review: aging and stability of the bonded interface. Dent Mater 24(1):90–101CrossRefPubMed
4.
Zurück zum Zitat Hashimoto M, Nagano F, Endo K, Ohno H (2011) A review: biodegradation of resin–dentin bonds. Jpn Dent Sci Rev 47(1):5–12CrossRef Hashimoto M, Nagano F, Endo K, Ohno H (2011) A review: biodegradation of resin–dentin bonds. Jpn Dent Sci Rev 47(1):5–12CrossRef
5.
Zurück zum Zitat Murdoch-Kinch CA, McLEAN ME (2003) Minimally invasive dentistry. J Am Dent Assoc 134(1):87–95CrossRefPubMed Murdoch-Kinch CA, McLEAN ME (2003) Minimally invasive dentistry. J Am Dent Assoc 134(1):87–95CrossRefPubMed
6.
Zurück zum Zitat De Moor R, Delmé K (2009) Laser-assisted cavity preparation and adhesion to erbium-lased tooth structure: part 1. Laser-assisted cavity preparation. J Adhes Dent 11(6):427–438PubMed De Moor R, Delmé K (2009) Laser-assisted cavity preparation and adhesion to erbium-lased tooth structure: part 1. Laser-assisted cavity preparation. J Adhes Dent 11(6):427–438PubMed
7.
Zurück zum Zitat Hadley J, Young DA, Eversole LR, Gornbein JA (2000) A laser-powered hydrokinetic system: for caries removal and cavity preparation. J Am Dent Assoc 131(6):777–785CrossRefPubMed Hadley J, Young DA, Eversole LR, Gornbein JA (2000) A laser-powered hydrokinetic system: for caries removal and cavity preparation. J Am Dent Assoc 131(6):777–785CrossRefPubMed
8.
Zurück zum Zitat De Moor R, Delmé K (2010) Laser-assisted cavity preparation and adhesion to erbium-lased tooth structure, part 2: present-day adhesion to erbium-lased tooth structure in permanent teeth. J Adhes Dent 12(2):91–102PubMed De Moor R, Delmé K (2010) Laser-assisted cavity preparation and adhesion to erbium-lased tooth structure, part 2: present-day adhesion to erbium-lased tooth structure in permanent teeth. J Adhes Dent 12(2):91–102PubMed
9.
Zurück zum Zitat Shahabi S, Chiniforush N, Bahramian H, Monzavi A, Baghalian A, Kharazifard MJ (2013) The effect of erbium family laser on tensile bond strength of composite to dentin in comparison with conventional method. Lasers Med Sci 28(1):139–142CrossRefPubMed Shahabi S, Chiniforush N, Bahramian H, Monzavi A, Baghalian A, Kharazifard MJ (2013) The effect of erbium family laser on tensile bond strength of composite to dentin in comparison with conventional method. Lasers Med Sci 28(1):139–142CrossRefPubMed
10.
Zurück zum Zitat Ramos TM, Ramos-Oliveira TM, Moretto SG, de Freitas PM, Esteves-Oliveira M, de Paula EC (2014) Microtensile bond strength analysis of adhesive systems to Er: YAG and Er, Cr: YSGG laser-treated dentin. Lasers Med Sci 29(2):565–573CrossRefPubMed Ramos TM, Ramos-Oliveira TM, Moretto SG, de Freitas PM, Esteves-Oliveira M, de Paula EC (2014) Microtensile bond strength analysis of adhesive systems to Er: YAG and Er, Cr: YSGG laser-treated dentin. Lasers Med Sci 29(2):565–573CrossRefPubMed
11.
Zurück zum Zitat Lin S, Caputo AA, Eversole LR, Rizoiu I (1999) Topographical characteristics and shear bond strength of tooth surfaces cut with a laser-powered hydrokinetic system. J Prosthet Dent 82(4):451–455CrossRefPubMed Lin S, Caputo AA, Eversole LR, Rizoiu I (1999) Topographical characteristics and shear bond strength of tooth surfaces cut with a laser-powered hydrokinetic system. J Prosthet Dent 82(4):451–455CrossRefPubMed
12.
Zurück zum Zitat Lee B-S, Lin P-Y, Chen M-H, Hsieh T-T, Lin C-P, Lai J-Y, Lan W-H (2007) Tensile bond strength of Er, Cr: YSGG laser-irradiated human dentin and analysis of dentin–resin interface. Dent Mater 23(5):570–578CrossRefPubMed Lee B-S, Lin P-Y, Chen M-H, Hsieh T-T, Lin C-P, Lai J-Y, Lan W-H (2007) Tensile bond strength of Er, Cr: YSGG laser-irradiated human dentin and analysis of dentin–resin interface. Dent Mater 23(5):570–578CrossRefPubMed
13.
Zurück zum Zitat Carvalho AO, Reis AF, de Oliveira MT, de Freitas PM, Aranha ACC, Eduardo CP, Giannini M (2011) Bond strength of adhesive systems to Er, Cr: YSGG laser-irradiated dentin. Photomed Laser Surg 29(11):747–752CrossRefPubMed Carvalho AO, Reis AF, de Oliveira MT, de Freitas PM, Aranha ACC, Eduardo CP, Giannini M (2011) Bond strength of adhesive systems to Er, Cr: YSGG laser-irradiated dentin. Photomed Laser Surg 29(11):747–752CrossRefPubMed
14.
Zurück zum Zitat Cardoso MV, Coutinho E, Ermis RB, Poitevin A, Van Landuyt K, De Munck J, Carvalho R, Lambrechts P, Van Meerbeek B (2008) Influence of Er, Cr: YSGG laser treatment on the microtensile bond strength of adhesives to dentin. J Adhes Dent 10(1):25–33PubMed Cardoso MV, Coutinho E, Ermis RB, Poitevin A, Van Landuyt K, De Munck J, Carvalho R, Lambrechts P, Van Meerbeek B (2008) Influence of Er, Cr: YSGG laser treatment on the microtensile bond strength of adhesives to dentin. J Adhes Dent 10(1):25–33PubMed
15.
Zurück zum Zitat Adebayo O, Burrow M, Tyas M, Palamara J (2012) Effect of tooth surface preparation on the bonding of self-etching primer adhesives. Oper Dent 37(2):137–149CrossRefPubMed Adebayo O, Burrow M, Tyas M, Palamara J (2012) Effect of tooth surface preparation on the bonding of self-etching primer adhesives. Oper Dent 37(2):137–149CrossRefPubMed
16.
Zurück zum Zitat Deng D, Yang H, Guo J, Chen X, Zhang W, Huang C (2014) Effects of different artificial ageing methods on the degradation of adhesive–dentine interfaces. J Dent 42(12):1577–1585CrossRefPubMed Deng D, Yang H, Guo J, Chen X, Zhang W, Huang C (2014) Effects of different artificial ageing methods on the degradation of adhesive–dentine interfaces. J Dent 42(12):1577–1585CrossRefPubMed
17.
Zurück zum Zitat Sauro S, Watson TF, Thompson I, Banerjee A (2012) One-bottle self-etching adhesives applied to dentine air-abraded using bioactive glasses containing polyacrylic acid: an in vitro microtensile bond strength and confocal microscopy study. J Dent 40(11):896–905CrossRefPubMed Sauro S, Watson TF, Thompson I, Banerjee A (2012) One-bottle self-etching adhesives applied to dentine air-abraded using bioactive glasses containing polyacrylic acid: an in vitro microtensile bond strength and confocal microscopy study. J Dent 40(11):896–905CrossRefPubMed
18.
Zurück zum Zitat De Munck J, Van Meerbeek B, Yoshida Y, Inoue S, Vargas M, Suzuki K, Lambrechts P, Vanherle G (2003) Four-year water degradation of total-etch adhesives bonded to dentin. J Dent Res 82(2):136–140CrossRefPubMed De Munck J, Van Meerbeek B, Yoshida Y, Inoue S, Vargas M, Suzuki K, Lambrechts P, Vanherle G (2003) Four-year water degradation of total-etch adhesives bonded to dentin. J Dent Res 82(2):136–140CrossRefPubMed
19.
Zurück zum Zitat Hashimoto M, Fujita S, Nagano F, Ohno H, Endo K (2010) Ten‐years degradation of resin–dentin bonds. Eur J Oral Sci 118(4):404–410CrossRefPubMed Hashimoto M, Fujita S, Nagano F, Ohno H, Endo K (2010) Ten‐years degradation of resin–dentin bonds. Eur J Oral Sci 118(4):404–410CrossRefPubMed
20.
Zurück zum Zitat Akin GE, Herguner-Siso S, Ozcan M, Ozel-Bektas O, Akin H (2012) Bond strengths of one-step self-etch adhesives to laser-irradiated and bur-cut dentin after water storage and thermocycling. Photomed Laser Surg 30(4):214–221CrossRefPubMed Akin GE, Herguner-Siso S, Ozcan M, Ozel-Bektas O, Akin H (2012) Bond strengths of one-step self-etch adhesives to laser-irradiated and bur-cut dentin after water storage and thermocycling. Photomed Laser Surg 30(4):214–221CrossRefPubMed
21.
Zurück zum Zitat Amaral F, Colucci V, Souza-Gabriel A, Chinelatti M, Palma-Dibb R, Corona S (2008) Adhesion to Er: YAG laser-prepared dentin after long-term water storage and thermocycling. Oper Dent 33(1):51–58CrossRefPubMed Amaral F, Colucci V, Souza-Gabriel A, Chinelatti M, Palma-Dibb R, Corona S (2008) Adhesion to Er: YAG laser-prepared dentin after long-term water storage and thermocycling. Oper Dent 33(1):51–58CrossRefPubMed
22.
Zurück zum Zitat Reis A, Albuquerque M, Pegoraro M, Mattei G, de Oliveira Bauer JR, Grande RHM, Klein-Junior CA, Baumhardt-Neto R, Loguercio AD (2008) Can the durability of one-step self-etch adhesives be improved by double application or by an extra layer of hydrophobic resin? J Dent 36(5):309–315CrossRefPubMed Reis A, Albuquerque M, Pegoraro M, Mattei G, de Oliveira Bauer JR, Grande RHM, Klein-Junior CA, Baumhardt-Neto R, Loguercio AD (2008) Can the durability of one-step self-etch adhesives be improved by double application or by an extra layer of hydrophobic resin? J Dent 36(5):309–315CrossRefPubMed
23.
Zurück zum Zitat Cardoso M, De Munck J, Coutinho E, Ermis RB, Van Landuyt K, de Carvalho RCR, Van Meerbeek B (2008) Influence of Er, Cr: YSGG laser treatment on microtensile bond strength of adhesives to enamel. Oper Dent 33(4):448–455CrossRefPubMed Cardoso M, De Munck J, Coutinho E, Ermis RB, Van Landuyt K, de Carvalho RCR, Van Meerbeek B (2008) Influence of Er, Cr: YSGG laser treatment on microtensile bond strength of adhesives to enamel. Oper Dent 33(4):448–455CrossRefPubMed
24.
Zurück zum Zitat Aizawaa K, Kameyamab A, Katoc J, Odad Y, Hiraie Y (2008) Influence of free-hand vs uniform irradiation on tensile bond strength in Er: YAG-lased dentin. J Adhes Dent 100:10 Aizawaa K, Kameyamab A, Katoc J, Odad Y, Hiraie Y (2008) Influence of free-hand vs uniform irradiation on tensile bond strength in Er: YAG-lased dentin. J Adhes Dent 100:10
25.
Zurück zum Zitat Moretto SG, Azambuja N, Arana‐Chavez VE, Reis AF, Giannini M, Eduardo CP, De Freitas PM (2011) Effects of ultramorphological changes on adhesion to lased dentin—scanning electron microscopy and transmission electron microscopy analysis. Microsc Res Tech 74(8):720–726CrossRefPubMed Moretto SG, Azambuja N, Arana‐Chavez VE, Reis AF, Giannini M, Eduardo CP, De Freitas PM (2011) Effects of ultramorphological changes on adhesion to lased dentin—scanning electron microscopy and transmission electron microscopy analysis. Microsc Res Tech 74(8):720–726CrossRefPubMed
26.
Zurück zum Zitat Chou J-C, Chen C-C, Ding S-J (2009) Effect of Er, Cr: YSGG laser parameters on shear bond strength and microstructure of dentine. Photomed Laser Surg 27(3):481–486CrossRefPubMed Chou J-C, Chen C-C, Ding S-J (2009) Effect of Er, Cr: YSGG laser parameters on shear bond strength and microstructure of dentine. Photomed Laser Surg 27(3):481–486CrossRefPubMed
27.
Zurück zum Zitat Matsumoto K, Hossain M, Hossain MI, Kawano H, Kimura Y (2002) Clinical assessment of Er, Cr: YSGG laser application for cavity preparation. J Clin Laser Med Surg 20(1):17–21CrossRefPubMed Matsumoto K, Hossain M, Hossain MI, Kawano H, Kimura Y (2002) Clinical assessment of Er, Cr: YSGG laser application for cavity preparation. J Clin Laser Med Surg 20(1):17–21CrossRefPubMed
28.
Zurück zum Zitat Hossain M, Nakamura Y, Yamada Y, Suzuki N, Murakami Y, Matsumoto K (2001) Analysis of surface roughness of enamel and dentin after Er, Cr: YSGG laser irradiation. J Clin Laser Med Surg 19(6):297–303CrossRefPubMed Hossain M, Nakamura Y, Yamada Y, Suzuki N, Murakami Y, Matsumoto K (2001) Analysis of surface roughness of enamel and dentin after Er, Cr: YSGG laser irradiation. J Clin Laser Med Surg 19(6):297–303CrossRefPubMed
29.
Zurück zum Zitat Carvalho RM, Manso AP, Geraldeli S, Tay FR, Pashley DH (2012) Durability of bonds and clinical success of adhesive restorations. Dent Mater 28(1):72–86CrossRefPubMed Carvalho RM, Manso AP, Geraldeli S, Tay FR, Pashley DH (2012) Durability of bonds and clinical success of adhesive restorations. Dent Mater 28(1):72–86CrossRefPubMed
30.
Zurück zum Zitat Armstrong SR, Vargas MA, Fang Q, Laffoon JE (2002) Microtensile bond strength of a total-etch 3-step, total-etch 2-step, self-etch 2-step, and a self-etch 1-step dentin bonding system through 15-month water storage. J Adhes Dent 5(1):47–56 Armstrong SR, Vargas MA, Fang Q, Laffoon JE (2002) Microtensile bond strength of a total-etch 3-step, total-etch 2-step, self-etch 2-step, and a self-etch 1-step dentin bonding system through 15-month water storage. J Adhes Dent 5(1):47–56
31.
Zurück zum Zitat Toledano M, Osorio R, Osorio E, Aguilera FS, Yamauti M, Pashley DH, Tay F (2007) Durability of resin–dentin bonds: effects of direct/indirect exposure and storage media. Dent Mater 23(7):885–892CrossRefPubMed Toledano M, Osorio R, Osorio E, Aguilera FS, Yamauti M, Pashley DH, Tay F (2007) Durability of resin–dentin bonds: effects of direct/indirect exposure and storage media. Dent Mater 23(7):885–892CrossRefPubMed
32.
Zurück zum Zitat De Munck J, Mine A, Poitevin A, Van Ende A, Cardoso MV, Van Landuyt KL, Peumans M, Van Meerbeek B (2012) Meta-analytical review of parameters involved in dentin bonding. J Dent Res 91(4):351–357CrossRefPubMed De Munck J, Mine A, Poitevin A, Van Ende A, Cardoso MV, Van Landuyt KL, Peumans M, Van Meerbeek B (2012) Meta-analytical review of parameters involved in dentin bonding. J Dent Res 91(4):351–357CrossRefPubMed
33.
Zurück zum Zitat Nakamichi I, Iwaku M, Fusayama T (1983) Bovine teeth as possible substitutes in the adhesion test. J Dent Res 62(10):1076–1081CrossRefPubMed Nakamichi I, Iwaku M, Fusayama T (1983) Bovine teeth as possible substitutes in the adhesion test. J Dent Res 62(10):1076–1081CrossRefPubMed
34.
Zurück zum Zitat Kitasako Y, Burrow M, Nikaido T, Tagami J (2000) The influence of storage solution on dentin bond durability of resin cement. Dent Mater 16(1):1–6CrossRefPubMed Kitasako Y, Burrow M, Nikaido T, Tagami J (2000) The influence of storage solution on dentin bond durability of resin cement. Dent Mater 16(1):1–6CrossRefPubMed
Metadaten
Titel
Influence of different Er,Cr:YSGG laser parameters on long-term dentin bond strength of self-etch adhesive
verfasst von
Tahsin Yildirim
Muhammet Kerim Ayar
Cemal Yesilyurt
Publikationsdatum
01.12.2015
Verlag
Springer London
Erschienen in
Lasers in Medical Science / Ausgabe 9/2015
Print ISSN: 0268-8921
Elektronische ISSN: 1435-604X
DOI
https://doi.org/10.1007/s10103-015-1825-3

Weitere Artikel der Ausgabe 9/2015

Lasers in Medical Science 9/2015 Zur Ausgabe