nach oben

Lasers in Medical Science

Erschienen in:

04.03.2019 | Original Article

Influence of grape seed extract in adhesion on dentin surfaces conditioned with Er,Cr:YSGG laser

verfasst von: Ana C. Silva, Paulo Melo, João Ferreira, Sofia Oliveira, Norbert Gutknecht

Erschienen in: Lasers in Medical Science | Ausgabe 7/2019

Einloggen, um Zugang zu erhalten

Abstract

The proanthocyanidin (PA)-rich grape seed extract (GSE) is a collagen cross-linking agent that can perform a chemical bond with the dentin’s collagen. The objective of this study was to evaluate the influence on shear bond strength (SBS) of the pre-conditioning of GSE, on human dentin surfaces conditioned with Er,Cr:YSGG laser. The sample consisted of 64 non-carious human teeth, divided into eight groups, four groups conditioned with Er,Cr:YSGG laser (4.5 W, 50 Hz, 50 μs, 70% air, 90% water) and four prepared with conventional methods (control). In both groups, a GSE solution was applied before using the two adhesives tested: Clearfil^™ SE Bond (CSE) and Scotchbond^™ Universal (SU). Subsequently, a SBS test, a scanning electron microscopy, and a statistical analysis were performed. In the laser groups, the best SBS mean (20.08 ± 4.01 MPa) was achieved in the group treated with GSE and CSE. The control group with the application of CSE showed the highest SBS mean (24.27 ± 10.28 MPa), and the group treated with laser and SU showed the lowest SBS mean (12.94 ± 6.51 MPa). Between these two groups there was a statistically significant difference (p = 0.05). However, this was not observed among the laser or control groups. The type of dentin surface preparation can influence the SBS. The CSE showed better SBS in laser and control groups. The presence of GSE did not improve the adhesion on surfaces conditioned with laser, but more studies should be carried out in the future to confirm this conclusion.

Obeidi A, Liu P, Ramp L, Beck P, Gutknecht N (2010) Acid-etch interval and shear bond strength of Er,Cr:YSGG laser-prepared enamel and dentin. Lasers Med Sci 25(3):363–369. https://doi.org/10.1007/s10103-009-0652-9 CrossRefPubMed

Dunn WJ, Davis JT, Bush AC (2005) Shear bond strength and SEM evaluation of composite bonded to Er:YAG laser-prepared dentin and enamel. Dent Mater 21(7):616–624. https://doi.org/10.1016/j.dental.2004.11.003 CrossRefPubMed

Visuri S, Gilbert J, Wright D, Wigdor H, Walsh JJ (1996) Shear strength of composite bonded to Er:YAG laser-prepared dentin. J Dent Res 75(1):599–605CrossRefPubMed

Zhang S, Chen T, Ge L (2012) Scanning electron microscopy study of cavity preparation in deciduous teeth using the Er:YAG laser with different powers. Lasers Med Sci 27(1):141–144. https://doi.org/10.1007/s10103-010-0854-1 CrossRefPubMed

De Moor R, Delmé K (2009) Laser-assisted cavity preparation and adhesion to erbium-lased tooth structure: part 1. Laser-assisted cavity preparation. J Adhes Dent 11(6):427–438. https://doi.org/10.3290/j.jad.a18136 CrossRefPubMed

Ceballo L, Toledano M, Osorio R, Tay F, Marshall G (2002) Bonding to Er-YAG-laser-treated dentin. J Dent Res 81(2):119–122CrossRefPubMed

Guven Y, Aktoren O (2013) Shear bond strength and ultrastructural interface analysis of different adhesive systems to Er:YAG laser-prepared dentin. Lasers Med Sci. https://doi.org/10.1007/s10103-013-1424-0

Van Meerbeek B, De Munck J, Mattar D, Van Landuyt K, Lambrechts P (2003) Microtensile bond strengths of an etch&rinse and self-etch adhesive to enamel and dentin as a function of surface treatment. Oper Dent 28(5):647–660PubMed

Aranha AC, De Paula Eduardo C, Gutknecht N, Marques MM, Ramalho KM, Apel C (2007) Analysis of the interfacial micromorphology of adhesive systems in cavities prepared with Er,Cr:YSGG, Er:YAG laser and bur. Microsc Res Tech 70(8):745–751. https://doi.org/10.1002/jemt.20459 CrossRefPubMed

10.

Brinckerhoff C, Matrisian L (2002) Matrix metalloproteinases: a tail of a frog that became a prince. Nat Rev Mol Cell Biol 3(3):207–214CrossRefPubMed

11.

Mazzoni A, Mannello F, Tay F, Tonti G, Papa S, Mazzotti G, Di Lenarda R, Pashley D, Breschi L (2007) Zymographic analysis and characterization of MMP-2 and -9 forms in human sound dentin. J Dent Res 86(6):792

12.

Tjäderhane L, Larjava H, Sorsa T, Uitto V, Larmas M, Salo T (1998) The activation and function of host matrix metalloproteinases in dentin matrix breakdown in caries lesions. J Dent Res 77(8):1622–1629CrossRefPubMed

13.

Sulkala M, Wahlgren J, Larmas M, Sorsa T, Teronen O, Salo T, Tjäderhane L (2001) The effects of MMP inhibitors on human salivary MMP activity and caries progression in rats. J Dent Res 80(6):1545–1549CrossRefPubMed

14.

Mazzoni A, Pashley D, Nishitani Y, Breschi L, Mannello F, Tjaderhane L, Toledano M, Pashley E, Tay F (2006) Reactivation of inactivated endogenous proteolytic activities in phosphoric acid-etched dentine by etch-and-rinse adhesives. Biomaterials 27(25):4470–4476CrossRefPubMed

15.

Liu Y, Tjaderhane L, Breschi L, Mazzoni A, Li N, Mao J, Pashley DH, Tay FR (2011) Limitations in bonding to dentin and experimental strategies to prevent bond degradation. J Dent Res 90(8):953–968. https://doi.org/10.1177/0022034510391799 CrossRefPubMedPubMedCentral

16.

Hass V, Luque-Martinez I, Munoz MA, Reyes MF, Abuna G, Sinhoreti MA, Liu AY, Loguercio AD, Wang Y, Reis A (2016) The effect of proanthocyanidin-containing 10% phosphoric acid on bonding properties and MMP inhibition. Dent Mater 32(3):468–475. https://doi.org/10.1016/j.dental.2015.12.007 CrossRefPubMed

17.

Han B, Jaurequi J, Tang B, Nimni M (2003) Proanthocyanidin: a natural crosslinking reagent for stabilizing collagen matrices. J Biomed Mater Res A 65(1):118–124CrossRefPubMed

18.

International Organization for Standardization (ISO) (1994) Guidance on testing of adhesion to tooth structure. Int Organ Stand Geneva TR 11405:1–14

19.

Firat E, Gurgan S, Gutknecht N (2012) Microtensile bond strength of an etch-and-rinse adhesive to enamel and dentin after Er:YAG laser pretreatment with different pulse durations. Lasers Med Sci 27(1):15–21. https://doi.org/10.1007/s10103-010-0830-9 CrossRefPubMed

20.

Koyuturk AE, Ozmen B, Cortcu M, Tokay U, Tosun G, Erhan Sari M (2014) Effects of Er:YAG laser on bond strength of self-etching adhesives to caries-affected dentin. Microsc Res Tech 77(4):282–288. https://doi.org/10.1002/jemt.22340 CrossRefPubMed

21.

Kato C, Taira Y, Suzuki M, Shinkai K, Katoh Y (2012) Conditioning effects of cavities prepared with an Er,Cr:YSGG laser and an air-turbine. Odontology 100(2):164–171CrossRefPubMed

22.

Lee BS, Lin PY, Chen MH, Hsieh TT, Lin CP, Lai JY, Lan WH (2007) Tensile bond strength of Er,Cr:YSGG laser-irradiated human dentin and analysis of dentin-resin interface. Dent Mater 23(5):570–578. https://doi.org/10.1016/j.dental.2006.03.016 CrossRefPubMed

23.

Moretto SG, Azambuja N Jr, Arana-Chavez VE, Reis AF, Giannini M, Eduardo Cde P, De Freitas PM (2011) Effects of ultramorphological changes on adhesion to lased dentin-scanning electron microscopy and transmission electron microscopy analysis. Microsc Res Tech 74(8):720–726. https://doi.org/10.1002/jemt.20949 CrossRefPubMed

24.

Obeidi A, McCracken MS, Liu PR, Litaker MS, Beck P, Rahemtulla F (2009) Enhancement of bonding to enamel and dentin prepared by Er,Cr:YSGG laser. Lasers Surg Med 41(6):454–462. https://doi.org/10.1002/lsm.20790 CrossRefPubMed

25.

Van Meerbeek B, Inokoshi S, Braem M, Lambrechts P, Vanherle G (1992) Morphological aspects of the resin-dentin interdiffusion zone with different dentin adhesive systems. J Dent Res 71(8):1530–1540. https://doi.org/10.1177/00220345920710081301 CrossRefPubMed

26.

Kostoryz E, Dharmala K, Ye Q, Wang Y, Huber J, Park J, Snider G, Katz J, Spencer P (2009) Enzymatic biodegradation of HEMA/bisGMA adhesives formulated with different water content. J Biomed Mater Res B Appl Biomater 88(2):394–401. https://doi.org/10.1002/jbm.b.31095 CrossRefPubMedPubMedCentral

27.

Breschi L, Mazzoni A, Ruggeri A, Cadenaro M, Di Lenarda R, De Stefano Dorigo E (2008) Dental adhesion review: aging and stability of the bonded interface. Dent Mater 24(1):90–101. https://doi.org/10.1016/j.dental.2007.02.009 CrossRefPubMed

28.

Tay F, Pashley D (2003) Have dentin adhesives become too hydrophilic? J Can Dent Assoc 69(11):726–731PubMed

29.

Pashley D, Tay F, Yiu C, Hashimoto M, Breschi L, Carvalho R, Ito S (2004) Collagen degradation by host-derived enzymes during aging. J Dent Res 83(3):216–221CrossRefPubMed

30.

Lehmann N, Debret R, Roméas A, Magloire H, Degrange M, Bleicher F, Sommer P, Seux D (2009) Self-etching increases matrix metalloproteinase expression in the dentin-pulp complex. J Dent Res 88(1):77–82. https://doi.org/10.1177/0022034508327925 CrossRefPubMed

31.

Sano H (2006) Microtensile testing, nanoleakage, and biodegradation of resin-dentin bonds. J Dent Res 85(1):11–14CrossRefPubMed

32.

Ferreira D, Slade D (2002) Oligomeric proanthocyanidins: naturally occurring O-heterocycles. Nat Prod Rep 19(5):517–541CrossRefPubMed

33.

Sung H, Chang W, Ma C, Lee M (2003) Crosslinking of biological tissues using genipin and/or carbodiimide. J Biomed Mater Res A 64(3):427–438CrossRefPubMed

34.

Vargas M, Cobb D, Denehy G (1997) Interfacial micromorphology and shear bond strength of single-bottle primer/adhesives. Dent Mater 13(5):316–324CrossRefPubMed

35.

Nakabayashi N, Saimi Y (1996) Bonding to intact dentin. J Dent Res 75(9):1706–1715CrossRefPubMed

36.

Al-Ammar A, Drummond J, Bedran-Russo A (2009) The use of collagen cross-linking agents to enhance dentin bond strength. J Biomed Mater Res B Appl Biomater 91:419–424. https://doi.org/10.1002/jbm.b.31417 CrossRefPubMedPubMedCentral

37.

Bedran-Russo AK, Pashley DH, Agee K, Drummond JL, Miescke KJ (2008) Changes in stiffness of demineralized dentin following application of collagen crosslinkers. J Biomed Mater Res B Appl Biomater 86(2):330–334. https://doi.org/10.1002/jbm.b.31022 CrossRefPubMed

38.

Bedran-Russo AK, Pereira PN, Duarte WR, Drummond JL, Yamauchi M (2007) Application of Crosslinkers to Dentin Collagen Enhances the Ultimate Tensile Strength. J Biomed Mater Res B Appl Biomater 80B:268–272. https://doi.org/10.1002/jbm.b.3059310.1002/jbmb

39.

Rosa AD, Sarma AV, Le CQ, Jones RS, Fried D (2004) Peripheral thermal and mechanical damage to dentin with microsecond and sub-microsecond 9.6 microm, 2.79 microm, and 0.355 microm laser pulses. Lasers Surg Med 35(3):214–228CrossRef

40.

Tsujimoto A, Barkmeier WW, Takamizawa T, Watanabe H, Johnson WW, Latta MA, Miyazaki M (2017) Comparison between universal adhesives and two-step self-etch adhesives in terms of dentin bond fatigue durability in self-etch mode. Eur J Oral Sci 125(3):215–222. https://doi.org/10.1111/eos.12346 CrossRefPubMed

41.

Suyama Y, Lührs A, De Munck J, Mine A, Poitevin A, Yamada T, Van Meerbeek B, Cardoso M (2013) Potential smear layer interference with bonding of self-etching adhesives to dentin. J Adhes Dent 15(4):317–324. https://doi.org/10.3290/j.jad.a29554 CrossRefPubMed

42.

Miyazaki M, Tsujimoto A, Tsubota K, Takamizawa T, Kurokawa H, Platt JA (2014) Important compositional characteristics in the clinical use of adhesive systems. J Oral Sci 56(1):1–9. https://doi.org/10.2334/josnusd.56.1 CrossRefPubMed

43.

Thanatvarakorn O, Prasansuttiporn T, Takahashi M, Thittaweerat S, Foxton R, Ichinose S, Tagami J, Nakajima M (2016) Effect of scrubbing technique with mild self-etching adhesives on dentin bond strengths and Nanoleakage expression. J Adhes Dent 18(3):197–204. https://doi.org/10.3290/j.jad.a36033 CrossRefPubMed

44.

Silva A, Melo P, Ferreira J, Oliveira T, Gutknecht N (2016) Evaluation of a self-adhesive composite in dentin surfaces - preparation with Er,Cr:YSGG laser. Int Mag Laser Dent 1:12–16

45.

Takada M, Shinkai K, Kato C, Suzuki M (2015) Bond strength of composite resin to enamel and dentin prepared with Er,Cr:YSGG laser. Dent Mater J 34(6):863–871. https://doi.org/10.4012/dmj.2015-053 CrossRefPubMed

46.

Yang B, Adelung R, Ludwig K, Bossmann K, Pashley DH, Kern M (2005) Effect of structural change of collagen fibrils on the durability of dentin bonding. Biomaterials 26(24):5021–5031. https://doi.org/10.1016/j.biomaterials.2005.01.024 CrossRefPubMed

Titel: Influence of grape seed extract in adhesion on dentin surfaces conditioned with Er,Cr:YSGG laser
verfasst von: Ana C. Silva
Paulo Melo
João Ferreira
Sofia Oliveira
Norbert Gutknecht
Publikationsdatum: 04.03.2019
Verlag: Springer London
Erschienen in: Lasers in Medical Science / Ausgabe 7/2019
Print ISSN: 0268-8921
Elektronische ISSN: 1435-604X
DOI: https://doi.org/10.1007/s10103-019-02749-w

Springer Medizin

Abstract

Bitte loggen Sie sich ein, um Zugang zu diesem Inhalt zu erhalten

Weitere Artikel der Ausgabe 7/2019

Influence of Er:YAG laser pulse duration on the long-term stability of organic matrix and resin-dentin interface

Polarization-resolved Stokes-Mueller imaging: a review of technology and applications

Voice improvement in patients with recurrent respiratory papillomatosis after combined treatment with cidofovir and CO2 laser surgery

Photobiomodulation therapy modulates epigenetic events and NF-κB expression in oral epithelial wound healing

Efficacy of low-level laser therapy in pain management after root canal treatment or retreatment: a systematic review

In response to the FDA warning about the use of photomedicine in gynecology