Skip to main content
main-content

01.12.2017 | Research article | Ausgabe 1/2017 Open Access

BMC Psychiatry 1/2017

Reliability and validity of general health questionnaire (GHQ-12) for male tannery workers: a study carried out in Kanpur, India

Zeitschrift:
BMC Psychiatry > Ausgabe 1/2017
Autoren:
Gyan Chandra Kashyap, Shri Kant Singh
Abbreviations
GHQ
General Health Questionnaire
PPS
Probability Proportional to Size
SC/ST
Schedule Caste/Schedule Tribes
SD
Standard Deviation

Background

The General Health Questionnaire (GHQ)-12 is a well-known and efficient tool for measuring the mental health status of the respondent subjects. The GHQ-12 scale is used worldwide in different segments of practice and research — clinical, epidemiological and psychological [1, 2]. When it was first introduced, the General Health Questionnaire contained 60 items in the scale, which were subsequently reduced to 30, then 28 items and, finally, to just 12 items [3, 4] in its present form.
GHQ-12 is the most refined scale for measuring the psychological well-being of various segments of the human population [5]. Many studies have validated GHQ-12 tool as a reliable measure of mental health in different segments of populations across countries [620].
It is evident from the study of a systematic review across occupational and population based studies provides the comparative results for occupational and population based study for GHQ-12 scale. Results from the study indicate a higher prevalence of mental health for the occupational based studies in comparison of population based studies [21].
Questionnaire consists of 12 items with each item measuring the severity of mental health problems in the 4 weeks preceding the study. Each item was assessed on a four-point scale (less than usual, no more than usual, rather more than usual, much more than usual). In this study GHQ-12 used the four-point Likert scale (1 to 4). The minimum possible total score is 12 and maximum, 48. The positive items are recoded from 1 (not at all) to 4 (much more than usual) and negative items from 4 (not at all) to 1 (much more than usual). As the application of GHQ-12 in any research setting is well-documented, it was decided to translate it into Hindi. (Hindi language).
Tanneries have attained considerable notoriety for the polluting nature of their work and the serious occupational health risks like mental health disorder, respiratory problems, musculoskeletal disorder, injuries etc. that they pose. Male tannery workers are constantly exposed to many harmful chemicals and physical hazards. Male tannery workers usually involved in many hazardous work process loading and unloading of raw hides, transferring the work, lifting the raw hides etc. in tannery premises. There is high risk of developing mental health disorder in such working conditions. The poor and unsafe working conditions act as stressors and increase the susceptibility of the male tannery workers. This study utilized the Hindi version of GHQ-12 scale to measure the mental health status of male tannery workers of Kanpur city, India. In present study we have tested GHQ-12 scale for the tannery workers, because they work in very hazardous work environment along with involvement in chromium exposure during tanning process, leather dust, exposure to chemical agents, ergonomic stressor increases their susceptibility which can be linked to mental health problem. So for, this study has tested the reliability, validity and factor structure of GHQ-12 scale for male tannery workers.

Methods

Data for the present research was drawn from a cross-sectional household study of tannery workers in the Jajmau area of Kanpur City in the state of Uttar Pradesh, India. The study was conducted during the period January–June, 2015, and was part of a PhD program. All total 286 tannery workers from the study area were interviewed.
A three-stage sampling design was used. In the first stage, we selected seven areas in which most households have members working in the tanneries of nearby Jajmau. In second stage, three areas were selected on the basis probability proportion to size (PPS) i.e., the highest number of households with tannery workers in the area. In the third stage, we listed the households in which at least one member was a tannery worker. If a household was found to have more than one member working in tanneries, we selected the respondent through KISH table. In this manner, 100 samples were selected from each area through systematic random sampling. The three selected areas were Budhiyaghat, Tadbagiya and Ashrafabad in the Jajmau suburban part of Kanpur city.
GHQ-12 English version scale had been translated into Hindi version by following the standard procedure. Intensive pre-testing was done with the tannery workers of Jajmau area for testing the internal consistency the GHQ-12 tool of Hindi version. Before starting the interviews, we have explained about the purpose of the survey and requested to participate in the survey. After that face-to-face interviews were conducted among those who agreed to participate by using a structured pre-tested questionnaire on the tannery workers. Suitable statistical techniques were used to meet the objectives of study. The correlation matrix was constructed to understand the correlation between the items of GHQ-12. The item-scale analysis of GHQ-12 was also performed. Cronbach alpha test was used to estimate the reliability (internal consistency) of GHQ-12 for the male tannery workers who participated in the study.
A large number of studies has used confirmatory factor analysis for estimating the factor structure of the GHQ-12 scale. This study had verified three different models. Model 1 was unidimensional. Model II contained the two factors: the first factor had all six positively worded items, and factor two had all six negatively worded items [22]. Model III include three factors: Anxiety and depression, Social Dysfunction and Loss of confidence [23]. The present study has used the maximum likelihood method for estimating the factor loading for the three different models. To test the goodness of fit, we have assessed the following indices; RMSEA: Root mean squared error of approximation, AIC: Akaike’s information criterion, BIC: Bayesian information criterion, CFI: Comparative fit index, TLI: Tucker-Lewis index, SRMR: Standardized root mean squared residual.

Description of the indices

RMSEA

The RMSEA estimate the parameter of the model that fit the population’s covariance matrix. Presently RMSEA was known as one of the most informative fit indices due to its sensitivity to the number of estimated parameters in the model. The cut-off value of RMSEA estimates varies from 0.6 to 0.7 within this range model is acceptable or best fit [24].

AIC

AIC considered as the first model criterion. Currently, it is most widely used model selection tool. AIC used to delineate between different fitted models having the same dimension [25].

BIC

In the computation of BIC based on the empirical log-likelihood and does not require the specification of priors. Basically, BIC has an asymptotic approximation to a transformation of the Bayesian posterior probability of a model [26].

CFI

Comparative fit index measures the fit of the model even when the sample size is small. The values are closer to 1 indicating the suitable model. But, cut off criterion of CFI ≥ 0.90 is acceptable. At present CFI is one of the most popularly fit indices because measures least affected by sample size [24, 27, 28].

TLI

TLI an index that prefers the simpler models. This index is well accepted where sample size is very small, and it gives the most accurate results. Due to the non-normed characteristics of this index value which can exceed above 1.0, which create some problem in the interpretation of the result. The cut-off point is 0.80 for this index while researcher suggested TLI ≥ 0.95 the threshold level [25].

SRMR

The SRMR describe the square root of the difference between the residuals of the sample covariance matrix and the hypothesized covariance model. The value of SRMR ranges 0 to 1 for fitting the model. The value 0 indicates the perfect fit and values as high as 0.08 are acceptable [26].

Participants

The study comprised 286 male tannery workers of age group 18–70 years from Jajmau in suburban Kanpur.

Results

Descriptive findings

Table 1 presents the descriptive findings of the study. The mean age of tannery workers was 38 (SD = 1.42) years. Around 66% of the tannery workers were illiterate and only 11% had studied up to high school and above. The majority (89%) of tannery workers were on temporary job contracts, and their mean work experience in their present workplaces was 10 (SD = 0.92) years. They were involved in different types of work in the tanneries they were working in: beam house work (8.42% of the workers), wet finishing (24.21%), dry finishing (50.53%) and miscellaneous (16.84%). The respondent tannery workers also reported that they worked almost every day in the week with 9 to10 hours as the mean working day. Mean number of working days was 6.50 (SD = 0.06) and duration of a working day was 9.54 (SD = 0.19) hours.
Table 1
Socio-economic and work-related characteristics of tannery workers in Kanpur city, India, 2015
Variables
Tannery workers (%)
(Numbers, N)
Age in yearsa
38.55 ± 1.42
286
Education
 Illiterate
66.32
189
 Up to primary
13.33
38
 Middle school
8.77
25
 High school & above
11.58
33
Work experience in current tannerya
10.10 ± 0.92
285
Work experience in previous tannerya
7.95 ± 1.25
99
Job status
 Temporary job (daily wages)
89.12
254
 Permanent job
10.88
31
Type of work
 Beam house work
8.42
24
 Wet finishing work
24.21
69
 Dry finishing work
50.53
144
 Miscellaneous work
16.84
48
Average working hours in daya
9.54 ± 0.19
285
Average working days in a weeka
6.50 ± 0.06
285
Religion
 Hindu
33.92
97
 Muslim
66.08
189
Caste
 SC/ST
65.38
187
 Other backward classes
18.53
53
 Others
5.59
16
 Don’t know
10.49
30
Exposure to the media
 No exposure
23.8
66
 Any exposure
76.92
220
aMean ± SD
About two-thirds of the workers were Muslims (66.08%) and one-third of them Hindus. The majority of the tannery workers (65.38%) belonged to SC/ST caste groups. Significantly, 6% belonged to the Other castes.
Table 2 presents the correlation matrix of unidirectional GHQ-12 items with inter-item reliability and the value of Cronbach’s α coefficient. The correlation matrix shows the statistical measure of association between the GHQ-12 items. Item 1 shows the high correlation with the item 3 and negative correlation with the item 6. Further, Item 6 show the negative correlation with the item 7, 8, 9, 10, 11, 12. Item 7 show the lowest correlation with item 9, and it was the highest with the item 12. Item 8 had the lowest correlation with the item 10. The inter-item correlation of GHQ-12 items was ranged from 0.49 to 0.53. And the average inter-item correlation was 0.50. Cronbach’s alpha test is one of the most commonly used tools to test reliability estimates and was employed in this study to test the internal consistency of GHQ-12 questionnaire for the male tannery workers. We found the alpha value to be 0.93 for the entire sample. The value of alpha represents the acceptable internal consistency for all the groups.
Table 2
Correlations between items in GHQ-12 scale, Inter-item reliability
 
Item 1
Item 2
Item 3
Item 4
Item 5
Item 6
Item 7
Item 8
Item 9
Item 10
Item 11
Item 12
Inter-item Reliabilitya
Item 1
1
            
Item 2
0.46
1.00
          
0.497
Item 3
0.73
0.50
1.00
         
0.523
Item 4
0.64
0.51
0.73
1.00
        
0.494
Item 5
0.49
0.60
0.50
0.48
1.00
       
0.506
Item 6
-0.70
-0.39
-0.70
-0.56
-0.38
1.00
      
0.524
Item 7
0.69
0.43
0.61
0.59
0.40
-0.60
1.00
     
0.510
Item 8
0.51
0.41
0.50
0.62
0.37
-0.49
0.56
1.00
    
0.503
Item 9
0.55
0.53
0.55
0.53
0.54
-0.50
0.44
0.30
1.00
   
0.530
Item 10
0.51
0.46
0.53
0.50
0.52
-0.48
0.48
0.29
0.64
1.00
  
0.505
Item 11
0.60
0.61
0.55
0.53
0.59
-0.47
0.55
0.39
0.69
0.66
1.00
 
0.512
Item 12
0.71
0.48
0.63
0.56
0.44
-0.62
0.69
0.41
0.57
0.43
0.53
1.00
0.504
aAverage inter-item reliability: 0.50; Cronbach’s α coefficient: 0.93

Confirmatory factor analysis

Table 3 shows goodness-of-fit statistics for the three models estimated in this study. Model 1 was unidimensional. Model II contained two factors, and Model III include three factors: Anxiety and depression, Social Dysfunction and Loss of confidence [23]. Confirmatory factor analysis gave the lowest RMSEA value in model-III although all three models estimated the RMSEA’s value more than 0.08. Results show the lowest AIC and BIC value in model-II, whereas it was the highest in model-I. Comparative fit index (CFI) estimate best-fitted model-III that gave the CFI value 0.97 along with CFI value 0.93 in model-II. In all the three models TLI estimates ranged 0.86–0.95. The cut-off point of TLI was 0.80, and the threshold level was 0.95 that is acceptable. The SRMR indicator gave the lowest value 0.031 for the model-III. The value close to 0 indicates the perfect fit and the value up to 0.08 are acceptable. The model-III was the best model fitted for the data that given the better estimates of four indicators than model-I and model-II.
Table 3
Goodness-of-fit of three confirmatory factor analysis models (N = 286)
Statistics
Model-I
Model-II
Model-III
RMSEA
0.127
0.171
0.091
AIC
7552.22
3786.02
4008.18
BIC
7687.23
3851.70
4073.86
CFI
0.892
0.930
0.973
TLI
0.865
0.884
0.955
SRMR
0.061
0.420
0.031
RMSEA Root mean squared error of approximation, AIC Akaike’s information criterion, BIC Bayesian information criterion, CFI Comparative fit index, TLI Tucker-Lewis index, SRMR Standardized root mean squared residual
Figure 1 shows the standardized factor loadings and between factor correlations of positive worded (PW) items and negatively worded items (NW) in model II. The factor loading ranged between - 0.66-0.86. The positive worded (PW) items had higher correlations that range from 0.62–0.86 then negatively worded items and the correlation between negatively worded items ranged - 0.66- 0.83. Factor 1 includes all positively worded items and factor 2 includes all negatively worded items. The correlation between factor 1 (Social Dysfunction) and factor 2 (Anxiety and Depression) was 0.85.
Figure 2 shows the standardized factor loadings and between factor correlation of model III. The factor loading ranged between −0.69-0.98. The result shows the strong relationship between the three factors of the model III. The correlation between factor 1 (Anxiety and Depression) and factor 2 (Social Dysfunction) was 0.92. And, the correlation between factor 2 (Social Dysfunction) and factor 3 (Loss of confidence) were 0.78. The correlation between factor 1 (Anxiety and Depression) and factor 3 (Loss of confidence) was the highest 0.98. It is evident from the strong correlations between the three factors confirm that Graetz’s 3-factor model fitted the data in better than two other models in this study.

Discussion

The GHQ-12 is the most refined and familiar scale for measuring the psychological well-being of diverse groups of people in different settings [620]. The GHQ-12 has been translated into several languages worldwide [7, 9, 13, 1618, 20]. The aim of this study was to translate and test the reliability, validity and factor structure of GHQ-12 questionnaire for male tannery workers in India. The GHQ-12 scale is also acknowledged for its reliability in measuring the perceived general health status of employees working in different sectors [21, 29], which is a reason for its widespread acceptance. There are different strategies for estimating reliability. The commonly-used ones are test-retest reliability, equivalent (or parallel) forms reliability and internal consistency reliability [30, 31]. This study used the internal consistency reliability method.
There are different methods for testing reliability that are based on the theory of estimation of test reliability. They include Spearman-Brown prophecy formula, Kuder-Richardson formulas (KR-20 and KR-21), and Cronbach alpha, which is also called the alpha coefficient [32]. The Cronbach alpha test is more flexible because it can be applied when test item scores are dichotomous as well as when they are scored on the Likert scale. KR-20 or KR-21 methods can be applied only when test-item scores have dichotomous values. Therefore, this study used Cronbach alpha test for testing the reliability. An alpha test coefficient of 0.93 was obtained for the entire sample, which is a universally accepted value for confirming reliability [33]. We may then conclude that, for this study, this is a highly reliable and valid scale.
Confirmatory factor analysis was used to compare three-factor structures for the GHQ-12 scale. This study has estimated the indices RMSEA, AIC, BIC, CFI, TLI, and SRMR. The study has used a unidimensional model that is model-I, model-II contain the two factors: positively worded items and negatively worded items. The third model was proposed by the Graetz: anxiety and depression, social dysfunction and loss of confidence. Our results show that the unidimensional model was the poorest fit that evidence from the estimated indices. The two-factor model estimated some of the indicators which are in the acceptable range. Few studies had mentioned the two-factor model that is an artificial grouping of all positively worded items and all negatively worded items. The two-factor model also fit the model for selected indicators in the study. The three-factor model proposed by the Graetz that was the best-fitted model. The result shows that all the factor had the strong correlation with each other. The correlation between factor 1 and factor 2 was 0.92. And, the correlation between factor 2 and factor 3 was 0.78. The correlation between factor 1 and factor 3 was the highest 0.98. Several previous studies also documented the strong association between the three actors and best-fitted model in the different data sets [3439].

Conclusions

Our results showed that Hindi version of the GHQ-12 is a reliable and valid tool for measuring psychological distress among the male tannery workers. Our analysis of the three-factor model proposed by the Graetz found the best fit model; all three factors were strongly correlated with each other.

Acknowledgments

The authors are thankful to all the participants in the survey. We are also grateful to Mr. Ashish Kumar Upadhyay and Mr. Praveen Chokhandre for their help in revising the manuscript.

Funding

We have not received any funding for this study.

Availability of data and materials

Data will not be shared in order to protect the participants identities.

Authors’ contributions

GCK developed the questionnaire, collected the data, contributed in acquisition of data, statistical analysis of data and wrote the manuscript. SKS enhanced the questionnaire, contributed to the concept and design of the paper, literature searches and critically revised the manuscript. Both authors read and approved the final manuscript.

Competing interests

The authors declare that they have no competing interests.

Ethics approval and consent to participate

We have received the ethical clearance from the committee. The study was approved by the Student Research Ethics Committee of International Institute for Population Sciences Mumbai, India. We have also received a consent to participate from each of the respondent before starting the interview.
Open AccessThis article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://​creativecommons.​org/​licenses/​by/​4.​0/​), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The Creative Commons Public Domain Dedication waiver (http://​creativecommons.​org/​publicdomain/​zero/​1.​0/​) applies to the data made available in this article, unless otherwise stated.
Literatur
Über diesen Artikel

Weitere Artikel der Ausgabe 1/2017

BMC Psychiatry 1/2017 Zur Ausgabe

Neu im Fachgebiet Psychiatrie

Meistgelesene Bücher aus dem Fachgebiet

2017 | Buch

Pocket Guide Psychopharmaka von A bis Z

Im Pocket Guide finden Sie von A bis Z schnell und übersichtlich die "Erste-Hilfe"-Information rund um alle Psychopharmaka, die Sie auf Station und im Praxisalltag brauchen. Das Pocket-Buch passt bestens in die Kitteltasche. Auf eine ausführliche Darstellung der Störungen wurde bewusst verzichtet.

Autoren:
Prof. Dr. med. Otto Benkert, Prof. Dr. med. I.-G. Anghelescu, Prof. Dr. med. G. Gründer, Prof. Dr. med. P. Heiser, Prof. Dr. rer. Nat. C. Hiemke, Prof. Dr. med. H. Himmerich, Prof. Dr. med. F. Kiefer, Prof. Dr. med. C. Lange-Asschenfeldt, Prof. Dr. med., Dr. rer. nat., Dipl.-Psych. M.J. Müller, Dr. med., Dipl.-Kfm. M. Paulzen, Dr. med. F. Regen, Prof. Dr. med. A. Steiger, Prof. Dr. med. F. Weber

2016 | Buch

Klinikmanual Psychiatrie, Psychosomatik und Psychotherapie

Dieses Kitteltaschenbuch enthält übersichtlich und systematisch alle notwendigen Informationen zum schnellen Nachschlagen auf Station, in der Ambulanz oder im Konsildienst: Klare Handlungsanweisungen, Therapieempfehlungen und die notwendigen rechtlichen Hintergründe.

Herausgeber:
Prof. Dr. Dr. Frank Schneider