nach oben

Skeletal Radiology

Erschienen in:

01.03.2016 | Review Article

3D printing from diagnostic images: a radiologist’s primer with an emphasis on musculoskeletal imaging—putting the 3D printing of pathology into the hands of every physician

verfasst von: Tamir Friedman, Mark Michalski, T. Rob Goodman, J. Elliott Brown

Erschienen in: Skeletal Radiology | Ausgabe 3/2016

Einloggen, um Zugang zu erhalten

Abstract

Three-dimensional (3D) printing has recently erupted into the medical arena due to decreased costs and increased availability of printers and software tools. Due to lack of detailed information in the medical literature on the methods for 3D printing, we have reviewed the medical and engineering literature on the various methods for 3D printing and compiled them into a practical “how to” format, thereby enabling the novice to start 3D printing with very limited funds. We describe (1) background knowledge, (2) imaging parameters, (3) software, (4) hardware, (5) post-processing, and (6) financial aspects required to cost-effectively reproduce a patient’s disease ex vivo so that the patient, engineer and surgeon may hold the anatomy and associated pathology in their hands.

Kumar S et al. Reinforcement of stereolithographic resins for rapid prototyping with cellulose nanocrystals. ACS Appl Mater Interfaces. 2012;4(10):5399–407. doi:10.1021/am301321v.PubMedCrossRef

Kumar S, Kruth JP. Composites by rapid prototyping technology. Mater Des. 2010;31(2):850–6.CrossRef

Picariello P. ASTM international committee F42 on additive manufacturing technologies. 2014. Available from: http://www.astm.org/Standards/F2792.htm. Accessed October 2015

Waisman M et al. Intraosseous regional anesthesia as an alternative to intravenous regional anesthesia. J Trauma. 1995;39(6):1153–6.PubMedCrossRef

Bartolo P. Stereolithography: materials, processes and application. New York: Springer; 2011.CrossRef

Cohen A et al. Mandibular reconstruction using stereolithographic 3-dimensional printing modeling technology. Oral Surg Oral Med Oral Pathol Oral Radiol Endod. 2009;108(5):661–6.PubMedCrossRef

Campbell T, Williams C, Ivanova O, Garrett B. Could 3D printing change the world? In: Strategic foresight initiative, Washington, DC: Atlantic Council. October 2011.

Rengier F et al. 3D printing based on imaging data: review of medical applications. Int J Comput Assist Radiol Surg. 2010;5(4):335–41. doi:10.1007/s11548-010-0476-x.PubMedCrossRef

Kruth JP, Leu MC, Nakagawa T. Progress in additive manufacturing and rapid prototyping. CIRP Ann Manuf Technol. 1998;47(2):525–40.CrossRef

10.

Berman B. 3-D printing: the new industrial revolution. Bus Horiz. 2012;55(2):155–62.CrossRef

11.

Bak D. Rapid prototyping or rapid production? 3D printing processes move industry towards latter. Assem Autom. 2003;23:340–5.CrossRef

12.

Lipson H et al. 3-D printing the history of mechanisms. J Mech Des. 2005;127(5):1029.CrossRef

13.

Price TR. A brief history Of 3D Printing. 2011. http://individual.troweprice.com/staticFiles/Retail/Shared/PDFs/3D_Printing_Infographic_FINAL.pdf. Accessed October 2015

14.

Kim MS et al. Rapid prototyping: a new tool in understanding and treating structural heart disease. Circulation. 2008;117(18):2388–94.PubMedCrossRef

15.

Evans B. Practical 3D printers. New York: Springer; 2012.CrossRef

16.

Silva DN et al. Dimensional error in selective laser sintering and 3D-printing of models for craniomaxillary anatomy reconstruction. J Craniomaxillofac Surg. 2008;36(8):443–9.PubMedCrossRef

17.

Markert M, Weber S, Lueth TC. A beating heart model 3D printed from specific patient data. Conf Proc IEEE Eng Med Biol Soc. 2007;2007:4472–5.PubMed

18.

Mironov V et al. Organ printing: computer-aided jet-based 3D tissue engineering. Trends Biotechnol. 2003;21(4):157–61.PubMedCrossRef

19.

Lewis M, Reid K, Toms AP. Reducing the effects of metal artefact using high keV monoenergetic reconstruction of dual energy CT (DECT) in hip replacements. Skelet Radiol. 2013;42(2):275–82.CrossRef

20.

Meinel FG et al. Metal artifact reduction by dual-energy computed tomography using energetic extrapolation: a systematically optimized protocol. Investig Radiol. 2012;47(7):406–14. doi:10.1097/RLI.0b013e31824c86a3.CrossRef

21.

Ebert LC, Thali MJ, Ross S. Getting in touch: 3D printing in forensic imaging. Forensic Sci Int. 2011;211(1-3):e1–6.PubMedCrossRef

22.

Kalogerakis E, Hertzmann A, Singh K. Learning 3D mesh segmentation and labeling. ACM Trans Graph. 2010;29(4):1.CrossRef

23.

Rosset A, Spadola L, Ratib O. OsiriX: an open-source software for navigating in multidimensional DICOM images. J Digit Imaging. 2004;17(3):205–16.PubMedPubMedCentralCrossRef

24.

Sheffer A, Praun E, Rose K. Mesh parameterization methods and their applications. Found Trends Comput Graph Vis. 2006;2(2):105–71.CrossRef

25.

Floater MS, Hormann K. Surface parameterization: a tutorial and survey. In: Farin G, Hans-Christian H, Hoffman D, Johnson C, Polthier K, Rumpf M, editors. Advances in multiresolution for geometric modelling. New York: Springer; 2005.

26.

Cignoni P, et al. MeshLab: an open-source mesh processing tool. In: Eurographics Italian Chapter Conference. 2008. Geneva: The Eurographics Association.

27.

Hess R. The essential Blender: guide to 3D creation with the open source suite Blender. 2007. San Francisco: No Starch Press.

28.

Augustine KE, et al. Plan to procedure: combining 3D templating with rapid prototyping to enhance pedicle screw placement. In: SPIE Medical Imaging. 2010. Bellingham, WA: International Society for Optics and Photonics.

29.

Owen BD et al. Rapid prototype patient-specific drill template for cervical pedicle screw placement. Comput Aided Surg. 2007;12(5):303–8.PubMedCrossRef

30.

Parthasarathy J. 3D modeling, custom implants and its future perspectives in craniofacial surgery. Ann Maxillofac Surg. 2014;4(1):9.PubMedPubMedCentralCrossRef

31.

Zein I et al. Fused deposition modeling of novel scaffold architectures for tissue engineering applications. Biomaterials. 2002;23(4):1169–85.PubMedCrossRef

32.

Sood AK, Ohdar R, Mahapatra S. Parametric appraisal of mechanical property of fused deposition modelling processed parts. Mater Des. 2010;31(1):287–95.CrossRef

33.

Ilievski F et al. Soft robotics for chemists. Angew Chem. 2011;123(8):1930–5.CrossRef

34.

Giordano RA et al. Mechanical properties of dense polylactic acid structures fabricated by three-dimensional printing. J Biomater Sci Polym Ed. 1997;8(1):63–75.CrossRef

35.

Hutmacher DW, Sittinger M, Risbud MV. Scaffold-based tissue engineering: rationale for computer-aided design and solid free-form fabrication systems. Trends Biotechnol. 2004;22(7):354–62.PubMedCrossRef

36.

Butscher A et al. Structural and material approaches to bone tissue engineering in powder-based three-dimensional printing. Acta Biomater. 2011;7(3):907–20.PubMedCrossRef

Titel: 3D printing from diagnostic images: a radiologist’s primer with an emphasis on musculoskeletal imaging—putting the 3D printing of pathology into the hands of every physician
verfasst von: Tamir Friedman
Mark Michalski
T. Rob Goodman
J. Elliott Brown
Publikationsdatum: 01.03.2016
Verlag: Springer Berlin Heidelberg
Erschienen in: Skeletal Radiology / Ausgabe 3/2016
Print ISSN: 0364-2348
Elektronische ISSN: 1432-2161
DOI: https://doi.org/10.1007/s00256-015-2282-6

Update Radiologie

Bestellen Sie unseren Fach-Newsletter und bleiben Sie gut informiert.

Newsletter bestellen

Springer Medizin

3D printing from diagnostic images: a radiologist’s primer with an emphasis on musculoskeletal imaging—putting the 3D printing of pathology into the hands of every physician

Abstract

Neu im Fachgebiet Radiologie

Akuter Schwindel: Wann lohnt sich eine MRT?

Screening-Mammografie offenbart erhöhtes Herz-Kreislauf-Risiko

S3-Leitlinie zu Pankreaskrebs aktualisiert

Fünf Dinge, die im Kindernotfall besser zu unterlassen sind

Update Radiologie

Springer Medizin

Abstract

Bitte loggen Sie sich ein, um Zugang zu diesem Inhalt zu erhalten

Weitere Artikel der Ausgabe 3/2016

Dynamic sonography of snapping hip due to gluteus maximus subluxation over greater trochanter

Erratum to: Radiological findings in an ancient Iranian salt mummy (Chehrābād ca. 410–350 BC)

Complete tear of the distal hamstring tendons in a professional football player: a case report and review of the literature

Browser's Notes

Sudden onset of severe anterior knee pain and knee locking during sleep

Sudden onset of severe anterior knee pain and knee locking during sleep

Neu im Fachgebiet Radiologie

Akuter Schwindel: Wann lohnt sich eine MRT?

Screening-Mammografie offenbart erhöhtes Herz-Kreislauf-Risiko

S3-Leitlinie zu Pankreaskrebs aktualisiert

Fünf Dinge, die im Kindernotfall besser zu unterlassen sind

Update Radiologie