Cardiovascular magnetic resonance feature tracking in small animals – a preliminary study on reproducibility and sample size calculation
verfasst von:
Tomas Lapinskas, Jana Grune, Seyedeh Mahsa Zamani, Sarah Jeuthe, Daniel Messroghli, Rolf Gebker, Heike Meyborg, Ulrich Kintscher, Remigijus Zaliunas, Burkert Pieske, Philipp Stawowy, Sebastian Kelle
Cardiovascular magnetic resonance feature tracking (CMR-FT) is a novel tissue tracking technique developed for noninvasive assessment of myocardial motion and deformation. This preliminary study aimed to evaluate the observer’s reproducibility of CMR-FT in a small animal (mouse) model and define sample size calculation for future trials.
Methods
Six C57BL/6 J mice were selected from the ongoing experimental mouse model onsite and underwent CMR with a 3 Tesla small animal MRI scanner. Myocardial deformation was analyzed using dedicated software (TomTec, Germany) by two observers. Left ventricular (LV) longitudinal, circumferential and radial strain (EllLAX, EccSAX and ErrSAX) were calculated. To assess intra-observer agreement data analysis was repeated after 4 weeks. The sample size required to detect a relative change in strain was calculated.
Results
In general, EccSAX and EllLAX demonstrated highest inter-observer reproducibility (ICC 0.79 (0.46–0.91) and 0.73 (0.56–0.83) EccSAX and EllLAX respectively). In contrast, at the intra-observer level EllLAX was more reproducible than EccSAX (ICC 0.83 (0.73–0.90) and 0.74 (0.49–0.87) EllLAX and EccSAX respectively). The reproducibility of ErrSAX was weak at both observer levels. Preliminary sample size calculation showed that a small study sample (e.g. ten animals to detect a relative 10% change in EccSAX) could be sufficient to detect changes if parameter variability is low.
Conclusions
This pilot study demonstrates good to excellent inter- and intra-observer reproducibility of CMR-FT technique in small animal model. The most reproducible measures are global circumferential and global longitudinal strain, whereas reproducibility of radial strain is weak. Furthermore, sample size calculation demonstrates that a small number of animals could be sufficient for future trials.
Abkürzungen
CMR
Cardiovascular magnetic resonance
EccSAX
Left ventricular short-axis circumferential strain
EllLAX
Left ventricular long-axis longitudinal strain
ErrSAX
Left ventricular short-axis radial strain
FT
Feature tracking
LV
Left ventricle / ventricular
SRccSAX
Left ventricular short-axis circumferential strain rate
SRllLAX
Left ventricular long-axis longitudinal strain rate
SRrrSAX
Left ventricular short-axis radial strain rate
Background
Clinical decision making mostly relies on a quantitative assessment of cardiac structure and function with left ventricular (LV) mass, volumes and ejection fraction (EF) being as critical parameters in many more situations than just selection of appropriate treatment strategy or prediction of cardiac outcomes [1]. However, all these parameters as global quantitative measures have some important limitations [2].
The superior measure for the assessment of global and regional myocardial function is myocardial strain which represents the percentage change in dimension from the resting phase to one achieved of a force or stress [3]. Majority of imaging techniques for myocardial deformation rely on identification and tracking of specific anatomical features. The cardiovascular magnetic resonance (CMR) tissue tracking approach is comparable with speckle tracking echocardiography where myocardium typically has a speckled appearance. In general, a tissue tracking method begins by identifying a relatively small window on one image and searching for the most comparable image pattern in a window of the same size in the subsequent frame [4]. Due to the lack of intramyocardial landmarks and excellent contrast between blood pool and myocardial tissue, CMR feature tracking (CMR-FT) technique focuses on endocardial and epicardial contouring [5].
Anzeige
Measurement of strain using CMR imaging became possible after the introduction of myocardial tagging techniques in which created tagging patterns provide information about myocardial motion during the entire cardiac cycle [6, 7]. However, the need for additional image acquisition and time consuming post-processing makes this technique less attractive.
CMR-FT technique provides quantitative information about myocardial deformation using conventional balanced steady state free precession (bSSFP) cine images and can be used in the assessment of the myocardial mechanics of all cardiac chambers [8‐10] and in various clinical scenarios [11‐13]. The CMR-FT algorithm is based on optical flow technology and was commercially introduced by several vendors. Interestingly, new calculation algorithms such as non-rigid, elastic image registration has been validated recently and became available in real-life setting [14].
CMR-FT has been validated against myocardial tagging technique for the assessment of regional myocardial motion in humans [15, 16]. Furthermore, recent studies have shown that myocardial deformation parameters may predict future events [17‐19] or anticipate response to treatment [20, 21]. Thereby, regional myocardial deformation parameters became a promising new biomarker to detect subtle changes in myocardial motion.
Current literature reports excellent inter- and intra-observer agreement [22‐24] and high inter-study reproducibility [25] of quantitative assessment of myocardial mechanics using CMR-FT. Importantly, derived myocardial deformation parameters are similar and highly reproducible in subjects examined at different field strength MRI scanners [26]. However, there are no studies assessing reproducibility of myocardial deformation parameters in small animals.
Anzeige
Accordingly, we performed this preliminary study to evaluate inter- and intra-observer reproducibility of CMR-FT derived strain measurements in a small animal (mouse) model. Also, we calculated the necessary study sample size to define the number of animals required for future studies.
Methods
Six C57BL/6 J male, mice were randomly selected from the ongoing experimental mouse model onsite. Animals used in this study were maintained in accordance with Guide for the Care and Use of Laboratory Animals published by the US National Institutes of Health. The study was approved by the local authorities (G0099/14).
Cardiac magnetic resonance
All CMR measurements were performed on a 3 Tesla small animal MRI system (MR Solutions, Guildford, United Kingdom) with a quadrature birdcage cardiac volume coil. After induction of inhalative anesthesia using isoflurane-oxygen (4–5%), animals were placed on a dedicated mouse sledge and MR-compatible ECG electrodes were attached to the paws. Anesthesia was maintained with isoflurane-oxygen (1.5–2%) to adjust heart rate at 400–450 beats per minute. Images were acquired using respiratory and ECG-gated gradient-echo cine sequences in two-chamber long-axis, four-chamber long-axis and five to seven short-axis planes completely covering the LV. Relevant acquisition parameters included: 15 phases per cardiac cycle, repetition time (TR) 10 ms, echo time (TE) 3 ms, averages 4, field of view (FOV) 40 × 40 mm, pixel size 0.15 × 0.15 mm, slice thickness 1 mm. All animals underwent two CMR examinations with a four-week time interval between each study.
Left ventricular volumetric and functional analysis
Volumetric analysis was performed offline using commercially available software CMR42 (Circle Cardiovascular Imaging Inc., Calgary, Canada). LV end-diastolic (LV EDV) and end-systolic (LV ESV) volumes were quantified using manual planimetry of the endocardial and epicardial surface from short-axis stack and LV stroke volume (LV SV), LV EF, myocardial mass and cardiac output were calculated.
Feature tracking
The cine images were used to calculate myocardial strain and strain rate offline using dedicated software (TomTec Imaging Systems, 2D CPA, MR, Cardiac Performance Analysis, Unterschleissheim, Germany). Endocardial and epicardial contours were manually drawn in both long-axis and one mid-ventricular short-axis views at end-diastole for each mouse by two independent observers. After application of a tracking algorithm the software automatically identified endocardial borders throughout the cardiac cycle and computed mean segmental and global myocardial strain and strain rate parameters. All images were analyzed three times and derived measurements were averaged. LV global longitudinal strain and strain rate (EllLAX and SRllLAX) were calculated by averaging the strain curves of both two-chamber and four-chamber long-axis views (three measurements in two imaging planes of two scans in six mice resulted in 72 measurements) whereas global circumferential and radial strain (EccSAX and ErrSAX) and strain rate (SRccSAX and SRrrSAX) were derived using one mid-ventricular short-axis view containing both papillary muscles (three measurements in one imaging plane of two scans in six mice resulted in 36 measurements) (Fig. 1). To assess intra-observer agreement data analysis was repeated 4 weeks after initial assessment.
×
Statistical analysis
Reproducibility testing
Data was analyzed using Microsoft Excel and IBM SPSS Statistics version 23.0 software (SPSS Inc., Chicago, IL, USA) for Windows. Data are expressed as mean ± standard deviation (SD). The Shapiro-Wilk test was used to determine whether the data was normally distributed. Nonparametric variables were compared using the Wilcoxon test. A p value of <0.05 was considered statistically significant. Inter- and intra-observer reproducibility was quantified using intraclass correlation coefficient (ICC) and Bland-Altman analysis [27]. Agreement was considered excellent for ICC >0.74, good for ICC 0.60–0.74, fair for ICC 0.40–0.59, and poor for ICC <0.40 [28].
Sample size calculation
Study sample size required to detect a relative 5, 8 and 10% change in strain with power of 90% and significance of 5% was calculated as follows [29]:
where n is the sample size, α the significance level, P the study power required and f the value of the factor for different values of α and P (f = 10.5 for α = 0.05 and p = 0.090), with σ the standard deviation of differences in measurements between two studies and δ the desired difference to be detected.
Results
Demographic characteristics, volumetric and functional parameters of study population are summarized in Table 1. All studies were completed and image quality was sufficient to perform CMR-FT analysis. Table 2 demonstrates CMR-FT derived strain parameters obtained by two observers.
Table 1
Demographic, volumetric and functional characteristics of study subjects
Parameter
Value
Study population (n)
6
Male gender
6 (100%)
LV EDV (μl)
40.60 ± 10.15
LV ESV (μl)
18.02 ± 7.32
LV SV (μl)
22.57 ± 6.90
LV EF (%)
56.18 ± 10.70
Cardiac output (ml/min)
9.70 ± 3.27
LV Mass (mg)
58.87 ± 13.56
Results are reported as mean ± standard deviation. LV left ventricle / ventricular, EDV end-diastolic volume, ESV end-systolic volume, SV stroke volume, EF ejection fraction
Table 2
Comparison of CMR-FT derived strain parameters obtained by observers in six mice (72 measures for longitudinal and 36 measures for circumferential and radial strain respectively)
Measurements obtained by two observers
(inter-observer level)
First observer
Second observer
EllLAX (%)
−10.32 ± 5.47
−11.97 ± 6.36
EccSAX (%)
−9.60 ± 3.68
−11.97 ± 5.97
ErrSAX (%)
12.59 ± 6.78
12.64 ± 7.23
Measurements obtained by one observer
(intra-observer level)
First measurement
Second measurement
EllLAX (%)
−10.32 ± 5.47
−11.57 ± 6.84
EccSAX (%)
−9.60 ± 3.68
−8.48 ± 6.50
ErrSAX (%)
12.59 ± 6.78
10.32 ± 7.88
Results are expressed as mean ± standard deviation. EllLAX left ventricular long-axis longitudinal strain, EccSAX left ventricular short-axis circumferential strain, ErrSAX left ventricular short-axis radial strain
Anzeige
Inter-observer and intra-observer reproducibility
The reproducibility for measurements was variable. Mean differences ± SD, limits of agreement and ICC for strain parameters are given in Table 3. There was excellent inter-observer reproducibility for EccSAX: ICC 0.79 (0.46–0.91) and EllLAX: ICC 0.73 (0.56–0.83). In contrast, the level of intra-observer reproducibility was better for EllLAX: ICC 0.83 (0.73–0.90) and lower for EccSAX: ICC 0.74 (0.49–0.87). The least reproducible measure for both observer levels was ErrSAX: ICC 0.68 (0.37–0.84) and ICC 0.69 (0.41–0.84) for inter-observer and intra-observer level respectively. Bland-Altman plots demonstrate inter-observer and intra-observer reproducibility for left ventricular EllLAX, EccSAX and ErrSAX (Fig. 2).
Table 3
Inter-observer and intra-observer reproducibility for LV longitudinal, circumferential and radial strain
Parameter
Mean difference ± SD
Limits of agreement
ICC (95% CI)
Inter-observer
EllLAX (%)
−1.65 ± 5.38
−12.2 to 8.90
0.73
(0.56 to 0.83)
EccSAX (%)
−2.37 ± 3.71
−9.64 to 4.89
0.79
(0.46 to 0.91)
ErrSAX (%)
0.05 ± 6.94
−13.55 to 13.66
0.68
(0.37 to 0.84)
Intra-observer
EllLAX (%)
−1.25 ± 4.62
−10.30 to 7.79
0.83
(0.73 to 0.90)
EccSAX (%)
1.11 ± 4.79
−8.27 to 10.50
0.74
(0.49 to 0.87)
ErrSAX (%)
−2.27 ± 6.98
−15.95 to 11.42
0.69
(0.41 to 0.84)
Results are reported as mean ± standard deviation. ICC intraclass correlation coefficient, CI confidence interval. Other abbreviations as in Table 2
×
Sample size calculation
The change in reproducibility has an impact on sample size required to detect significant differences in strain parameters. Table 4 lists the required sample sizes for each strain measure. For example, to show a relative 10% change in EccSAX in mice would require ten animals (not measures). In contrast, 85 mice are required to detect a 5% change in ErrSAX with CMR-FT (power of 90% and α error of 0.05).
Table 4
Sample size calculation for LV longitudinal, circumferential and radial strain to detect 5, 8 and 10% relative change with 90% power and α error of 0.05
The current pilot study was designed to assess the inter-observer and intra-observer reproducibility of CMR-FT for the analysis of strain and strain rate in a small animal (mouse) model and to define the number of animals required for future studies. Our preliminary data analysis demonstrates very promising results:
CMR-FT can be used for quantitative assessment of cardiac motion in small animals
Good to excellent inter-observer and intra-observer reproducibility was found for LV circumferential and longitudinal strain, whereas radial strain is highly variable between repeated measurements
Sample size calculation demonstrates relatively small sample size of animals (not measures) required to detect a 5, 8 and 10% change in strain parameters.
Small animal models play an important role in the understanding of cardiac mechanics in the various types of cardiovascular disease. There is growing evidence that advanced measures of myocardial deformation (strain or torsion) are better predictors of outcome compared with the routinely used ejection fraction or wall motion score index [30]. However, in the past the majority of animal experiments focused on changes in routine parameters as LV mass, volumes and/or function. The analysis of myocardial deformation offers quantitative assessment of early changes in LV diastolic function [31] and new findings in previously reported “negative” studies or studies with no obvious effect after therapy may improve our understanding of the underlying pathophysiology.
Anzeige
Previous studies have demonstrated the feasibility of two-dimensional (2D) speckle tracking echocardiography to assess myocardial motion in small animal models. Peng et al., evaluated the feasibility of circumferential and radial strain to detect LV dysfunction in a heart failure mouse models. They demonstrated that mice subjected to transverse aortic constriction experienced an immediate and sustained decrease in circumferential and radial strain [32]. The technical challenges with 2D echocardiography as limited imaging projections, small animal hearts and lower spatial resolution still limit its widespread use.
CMR-FT as a novel tissue tracking method became available in 2009 [33] and immediately evoked great interest in the CMR community. The CMR-FT algorithm tracks the endocardial and epicardial borders over time using conventional cine images. The advantages are that CMR-FT does not require acquisition of additional sequences and helps to protect animals from prolonged anesthesia. Furthermore, quantitative assessment of myocardial deformation can be performed retrospectively as cine images are a part of routine CMR study.
CMR-FT has been validated against the traditional CMR tagging techniques and showed excellent correlation between the two methods [34]. As opposed to speckle tracking echocardiography, only a small number of studies have been done using CMR tagging technique in small animal models [35, 36] and none using CMR-FT.
The temporal resolution of the tissue tracking technique is very important to meaningful interpretation of the results. If it is too low, an effect known as image de-correlation appears and the local patterns could become less comparable [4]. Under the conscious state the normal murine heart rate ranges from 500 to 700 beats per minute (bpm) [37]. During anesthesia, we were able to adjust mice heart rate at 400–450 bpm and achieve temporal resolution of 15 phases per cardiac cycle. There are no studies reporting minimal number of cardiac phases required to assess myocardial strain using CMR-FT. However, it should be mentioned that expected average temporal resolution in human studies is 25–35 phases per cardiac cycle (e.g., 30–40 ms at a heart rate of 60 bpm) [38]. Future studies assessing the impact of temporal resolution on the myocardial tracking accuracy of CMR-FT in animals and humans are necessary.
Anzeige
Higher reproducibility enables smaller changes to be detected with greater reliability. Comparative studies have reported that the most consistent parameters derived from CMR-FT are global circumferential and global longitudinal strain [33, 34]. Augustine et al., reported reasonable agreement between myocardial tagging and CMR-FT for global circumferential strain but not for longitudinal or radial strain. Inter-observer variability was acceptable for circumferential, but poor for radial strain [39]. Morton et al., evaluated inter-study reproducibility in healthy volunteers and found that global circumferential strain was the most reproducible measure [22]. Studies analyzing reproducibility of myocardial deformation parameters in small animal models are lacking. Haggery et al., conducted a study to evaluate the inter-observer and intra-observer variability in mice using stimulated echo CMR (DENSE) and reported high reproducibility for LV strains and torsion with better agreement of measurements at the inter-observer level. Myocardial strains were generally more reproducible than corresponding strain rates [40].
To improve reproducibility in our study, all measurements were derived three times. This strategy has been reported to increase the reproducibility of measurements in previous studies [10, 23]. Our study also demonstrates good to excellent inter-observer agreement for global circumferential and global longitudinal strain. In contrast, the reproducibility of longitudinal strain is better at the intra-observer level. However, the reproducibility of radial strain was weak, as expected and as reported in previous human studies [35].
The variability between measurements is an important factor for determining the ability of the technique to detect relevant differences between the individuals or significant change at follow-up examinations and becomes important not only in the context of experimental studies, but also in the clinical setting [29]. Clinical practice involves measuring of different parameters for a variety of purposes, such as diagnosis of the disease or prediction of future events. Measurements are almost always prone to various types of errors which make the measured value to differ from the true value. If these measurements are performed by different observers, differences may be due to bias of the observers [41].
In our study, inter-observer reproducibility and intra-observer reproducibility of the LV global circumferential strain were excellent while global longitudinal strain demonstrated good inter-observer and intra-observer agreement. The excellent reproducibility means that parameters could be used to detect differences between individuals or focus on intra-individual changes during follow-up studies.
Sample size calculation is an important aspect of study design and enables determination of how large the study sample should be. Too small sample size can miss the real effect, whereas too large sample size leads to unnecessary waste of time and resources (animals). Estimates of required sample size depend on the variability of the population – the greater the variability, the larger the required sample size. The most favored scientific method in experiments is calculation of sample size by power analysis. In the present pilot study, we estimated the variability of the difference because the standard deviation of a difference in measurement in an animal is lower than variability of the population. Therefore, the number of animals needed to test a hypothesis could be reduced because the effect of animal-to-animal variation on the measurement is eliminated [42]. In the light of the current discussion of improving animal welfare by methodological refinements to reduce suffering, ameliorated imaging techniques are an important tool to achieve it.
Reproducibility and sample size are affected by image quality and variability of measurements. We successfully performed measurements in all animals and to decrease variability of measurements used averaged results of repeated analyses. Nevertheless, our calculations could give the impression that sample sizes required to detect relative changes in strain parameters are too low (e.g. ten animals per group are needed to detect a relative 10% change in EccSAX or 13 animals for EllLAX). It is important to remember that the addition of a 25% dropout rate (proportion of eligible subjects who will not complete the study or provide only partial information) before planning a study will further increase the final sample size. Despite the small number of animals included in the study we could demonstrate that myocardial deformation parameters are highly reproducible. However, larger animal studies are necessary to confirm our preliminary findings.
Limitations
Our study is limited due to the small number of animals and larger sample size may be required to detect more subtle differences. In addition, CMR-FT was performed on 2D and low temporal resolution (15 phases per cardiac cycle) cine images.
Conclusions
Myocardial deformation parameters represent a new potential biomarker for the detection of early myocardial dysfunction. Cardiac mechanics parameters derived from conventional cine images using CMR-FT technique in small animal models are highly reproducible. The most reproducible measures are global circumferential and global longitudinal strain, whereas reproducibility of radial strain is weak. Relatively small study sample size could be sufficient to detect changes if parameter variability is low.
Acknowledgements
We thank Anne Gale for editorial assistance.
Funding
This work was supported by the grant in aid of Novartis (Germany). TL received support from the Hospital of Lithuanian University of Health Sciences. SK was supported by Philips Healthcare. TL, UK, BP and SK received support from German Centre for Cardiovascular Research.
Availability of data and materials
The dataset used in the article is available on request of the German Heart Institute Berlin, Germany.
Ethics approval and consent to participate
Animals used in this study were maintained in accordance with Guide for the Care and Use of Laboratory Animals published by the US National Institutes of Health. All animal procedures comply with the guidelines of the German Law on the Protection of Animals and the protocol was approved by an institutional review committee (G0099/14).
Consent for publication
Not applicable.
Competing interests
The authors declare that they have no competing interests.
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Open AccessThis article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated.
Cardiovascular magnetic resonance feature tracking in small animals – a preliminary study on reproducibility and sample size calculation
verfasst von
Tomas Lapinskas Jana Grune Seyedeh Mahsa Zamani Sarah Jeuthe Daniel Messroghli Rolf Gebker Heike Meyborg Ulrich Kintscher Remigijus Zaliunas Burkert Pieske Philipp Stawowy Sebastian Kelle